DOI QR코드

DOI QR Code

3D finite element modelling of composite connection of RCS frame subjected to cyclic loading

  • 투고 : 2012.02.19
  • 심사 : 2013.07.14
  • 발행 : 2013.09.25

초록

Composite special moment frame is one of the systems that are utilized in areas with low to high seismicity to deal with earthquake forces. Composite moment frames are composed of reinforced concrete columns (RC) and steel beams (S); therefore, the connection region is a combination of steel and concrete materials. In current study, a three dimensional finite element model of composite connections is developed. These connections are used in special composite moment frame, between reinforced concrete columns and steel beams (RCS). Finite element model is discussed as a most reliable and low cost method versus experimental procedures. Based on a tested connection model by Cheng and Chen (2005), the finite element model has been developed under cyclic loading and is verified with experimental results. A good agreement between finite element model and experimental results was observed. The connection configuration contains Face Bearing Plates (FBPs), Steel Band Plates (SBPs) enveloping around the RC column just above and below the steel beam. Longitudinal column bars pass through the connection with square ties around them. The finite element model represented a stable response up to the first cycles equal to 4.0% drift, with moderately pinched hysteresis loops and then showed a significant buckling in upper flange of beam, as the in test model.

키워드

참고문헌

  1. American Institute of Steel Construction (2001), Manual of Steel Construction Load and Resistance Factor Design (LRFD), 3rd Edition, Chicago, IL, AISC.
  2. Azar, B.F., Ghaffarzadeh, H. and Talebian, N. (2013), "Seismic performance of composite RCS special moment frames", KSCE J. Civil Eng., 17(2), 450-457. https://doi.org/10.1007/s12205-013-1431-5
  3. Bathe, K.J. (1996), Finite Element Procedures, Simon &Schuster, A Viacom Company, Upper Saddle River, New Jersey, USA.
  4. BIBLIOGRAPHY AIJ composite committee (1994), Design Guidelines for Composite RCS Joints, Architectural Institute of Japan, Tokyo, Japan.
  5. Braconi, A., Salvatore, W., Tremblay, R. and Bursi, O.S. (2007), "Behaviour and modeling of partial-strength beam-to-column composite joints for seismic applications", J. Earthq. Eng. Struct. Dyn., 36(1), 142-161. https://doi.org/10.1002/eqe.629
  6. Bugeja, M.N., Bracci, J.M. and Moore, W.P. (2000), "Seismic behavior of composite RCS frame systems", J. Struct. Eng. - ASCE, 126(4), 429-436. https://doi.org/10.1061/(ASCE)0733-9445(2000)126:4(429)
  7. Cheng, C.T. and Chen, C.C. (2005), "Seismic behavior of steel beam and reinforced concrete column connections", J. Construct. Steel Res., 61(5), 587-606. https://doi.org/10.1016/j.jcsr.2004.09.003
  8. Cordova, P.P. and Deierlein, G.G. (2005), Validation of the Seismic Performance of Composite RCS Frames: Full-Scale Testing, Analytical Modelling, and Seismic Design, Report No. 155 the John A. Blume Earthquake Engineering Center, Stanford University.
  9. Cordova, P.P. (2005), Validation of the Seismic Performance of Composite RCS Frames, Ph.D. Dissertation, Stanford University.
  10. Deierlein, G.G., Sheikh, T.M., Yura, J.A. and Jirsa, J.O. (1989), "Beam-column moment connections for composite frames: part 2", J. Struct. Eng. - ASCE, 115(11), 2877-2896. https://doi.org/10.1061/(ASCE)0733-9445(1989)115:11(2877)
  11. FEMA 461 (2007), "Interim Protocols for Determining Seismic Performance Characteristics of Structural and Nonstructural Components through Laboratory Testing", Federal Emergency Management Agency.
  12. Griffis, L.G. (1986), "Some design considerations for composite-frame structures", AISC/Engineering Journal, Second Quarter, 59-64.
  13. Hwang, T.H. and Scribner, C.F. (1984), "R/C member cyclic response during various loadings", J. Struct. Eng. - ASCE, 110(3), 477-489. https://doi.org/10.1061/(ASCE)0733-9445(1984)110:3(477)
  14. Kanno, R. (1993), Strength Deformation, and Seismic Resistance of Joints between Steel Beams and Reinforced Concrete Columns, Ph.D. Dissertation, Cornell University, Ithaca, NY.
  15. Kanno, R. and Deierlein, G.G. (2000), "Design model of joints for RCS frames In: Composite construction in steel and concrete" IV, ASCE.
  16. Krawinkler, H. and Nassar, A. (1990), "Strength and ductility demands for SDOF and MDOF systems subjected whittier narrows earthquake ground", SMIP 1990 Seminar on Seismological and Engineering Implications of Recent Strong-Motion Data, 3-10.
  17. Krawinkler, H.A., Gupta, R. and Luco, N. (2000), Development of Loading Histories for Testing of Steel Beam-Column Assemblies, Report for the SAC steel project, FEMA.
  18. Liu, J. and Astaneh-Asl, A. (2000), "Cyclic behavior of shear connections with floor slab", Proceedings of 6th ASCCS Conference, Los Angeles, March.
  19. Lusas (2006), Software package, Version 14.03.
  20. Mirza, O. and Uy, B. (2010), "Finite element model for the long-term behaviour of composite steel-concrete push tests", J. Steel Compos. Struct., 10(4), 45-67. https://doi.org/10.12989/scs.2010.10.1.045
  21. Noguchi, H. and Uchida, K. (2004), "FEM Analysis of hybrid structural frames with RC columns and steel beams", J. Struct. Eng. - ASCE, 328-335.
  22. Parra-Montesinos, G. and Wight, J.K. (2000), "Seismic response of exterior RC column-to-steel beam connections", J. Struct. Eng., ASCE, 126(10), 1113-1121. https://doi.org/10.1061/(ASCE)0733-9445(2000)126:10(1113)
  23. Sheikh, T.M., Deierlein, G.G., Yura, J.A. and Jirsa, J.O. (1989), "Beam-column moment connections for composite frames: part 1", J. Struct. Eng., ASCE, 115(11), 2858-2876. https://doi.org/10.1061/(ASCE)0733-9445(1989)115:11(2858)
  24. Shen, H.X. and Qiang, G. (2010), "Nonlinear finite element analysis of exterior RC column to steel beam connection", Proceedings of ICCASM 2010, Taiyuan-China, October.
  25. Tort, C. and Hajjar, J. (2010), "Mixed finite-element modelling of rectangular concrete-filled steel tube members and frames under static and dynamic loads", J. Struct. Eng. - ASCE, 136(6), 654-664. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000158
  26. Wang, Y., Xuan, Y. and Mao, P. (2010), "Nonlinear finite element analysis of the steel-concrete composite beam to concrete-filled steel tubular column joints", Int'l J. Nonlinear Sci., 9(3), 341-348.
  27. Yu, Q.S., Noel, S. and Uang, C.M. (2000), "Composite slab effects on strength and stability of moment connections with RBS or welded haunch modification", Proceedings of 6th ASCCS Conference, Los Angeles, March.

피인용 문헌

  1. Standardization of composite connections for trapezoid web profiled steel sections vol.55, pp.4, 2015, https://doi.org/10.12989/sem.2015.55.4.765
  2. Experimental investigation of steel beam to RC column connection via a through-plate vol.133, 2017, https://doi.org/10.1016/j.jcsr.2017.02.007
  3. FE simulation of S-N curves for a riveted connection using two-stage fatigue models vol.2, pp.4, 2013, https://doi.org/10.12989/acd.2017.2.4.333