Steel and Composite Structures

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Compressive performance with variation of yield strength and width-thickness ratio for steel plate-concrete wall structures

  • Choi, Byong-Jeong (Department of Plant Architectural Engineering, Kyonggi University) ;
  • Kim, Won-Ki (Department of Architectural Engineering, Hoseo University) ;
  • Kim, Woo-Bum (Department of Architectural Engineering, Kongju National University) ;
  • Kang, Cheol-Kyu (Department of Plant Architectural Engineering, Kyonggi University)
  • Received : 2012.04.26
  • Accepted : 2013.05.02
  • Published : 2013.05.25
⟨ Previous Next ⟩

Abstract

The primary objectives of this paper are to describe the buckling patterns and to determine the squash load of steel plate-concrete (SC) walls. The major variables in this study were the width-thickness (B/t) ratio and yield strength of surface steel plates. Six SC walls were tested, and the results include the maximum strength, buckling pattern of steel plates, strength of headed studs, and behavior of headed studs. Based on the test results, the effects of the B/t ratio on the compressive strength are also discussed. The paper also presents recommended effective length coefficients and discusses the effects of varying the yield strength of the steel plate, and the effects of headed studs on the performance of SC structures based on the test results and analysis.

Keywords

References

  1. AIJ, JEAG 4618 (2005), Technical guidelines for seismic design of steel plate JEAG 4618 , concrete structures: for buildings and structures.
  2. Choi, B.J. and Han, H.S. (2009), "An experiment on compressive profile of the unstiffened steel plate-concrete structures under compression loading", Steel Compos. Struct., Int. J., 9(6), 519-534. https://doi.org/10.12989/scs.2009.9.6.519
  3. Dabaon, M.A., El-Boghdadi, M.H. and Hassanein, M.F. (2009), "Experimental investigation on concrete-filled stainless steel stiffened tubular stub columns", Eng. Struct., 31(2), 300-307. https://doi.org/10.1016/j.engstruct.2008.08.017
  4. Dabaon, M.A., El-Khoriby, S., El-Boghdadi, M.H. and Hassanein, M.F. (2009), "Confinement effect of stiffened and unstiffened concrete-filled stainless steel tubular stub columns", J. Construct. Steel Res., 65(8-9), 1846-1854. https://doi.org/10.1016/j.jcsr.2009.04.012
  5. Galambos, Theodore V. (1998), Guide to stability criteria for metal structures, (5th Edition), John Wiley & Sons Inc., USA.
  6. Han L.H. (2002), "Tests on stub columns of concrete-filled RHS sections", J. Construct. Steel Res., 58(3), 353-372. https://doi.org/10.1016/S0143-974X(01)00059-1
  7. Han, L.H., Liu, W. and Yang, Y.F. (2008), "Behavior of thin walled steel tube confined concrete stub columns subjected to axial local compression", Thin-Walled Struct., 46(2), 155-164. https://doi.org/10.1016/j.tws.2007.08.029
  8. Kanchi, M., Kitano, C., Sgawara, D. and Hiragawa, K. (1996), "Experimental study on a concrete-filled steel structure, compressive test (1)", Architectural Institute of Japan Conference - Part 2, 1071-1072.
  9. Kim, W.B. and Choi, B.J. (2011), "Shear strength of connections between open and closed steel-concrete composite sandwich structures", Steel Compos. Struct., Int. J., 11(6), 169-181. https://doi.org/10.12989/scs.2011.11.2.169
  10. Korea Electric Association (KEA) (2010), Steel-concrete structures (KEPIC-SNG), Korea Electric Power Industry code, Seoul, Korea.
  11. Kwon, Y.B., Seo, S.J. and Kang, D.W. (2011), "Prediction of the squash loads of concrete-filled tubular section columns with local buckling", Thin-Walled Struct., 49(1), 85-93. https://doi.org/10.1016/j.tws.2010.08.009
  12. Liang, Q.Q., Uy, B. and Richard Liew, J.Y. (2006), "Nonlinear modeling and evaluation of concrete-filled steel tubular columns with local buckling effects", J. Construct. Steel Res., 62(6), 581-591. https://doi.org/10.1016/j.jcsr.2005.09.007
  13. Liu, D., Gho, W.M. and Yuan, J. (2003), "Ultimate capacity of high-strength rectangular concrete-filled steel hollow section stub columns", J. Construct. Steel Res., 59(12), 1499-1515. https://doi.org/10.1016/S0143-974X(03)00106-8
  14. Liu, D. (2005), "Tests on high-strength rectangular concrete-filled steel hollow section stub columns", J. Construct. Steel Res., 61(7), 902-911. https://doi.org/10.1016/j.jcsr.2005.01.001
  15. Liu, Y. and Young, B. (2003), "Buckling of stainless steel square hollow section compression members", J. Construct. Steel Res., 59(2), 165-177. https://doi.org/10.1016/S0143-974X(02)00031-7
  16. Loov, R.E. (1998), "Review of A23.3-94 simplified method of shear design and comparison with results using shear friction", Can. J. Civil Eng., 25(3), 437-450. https://doi.org/10.1139/l97-101
  17. LRFD, AISC (2005), Load and Resistance Factor Design Specification, Chicago.
  18. McKinley, B. and Boswell, L.F. (2002), "Behavior of double skin composite construction", J. Construct. Steel Res., 58(10), 1347-1359 https://doi.org/10.1016/S0143-974X(02)00015-9
  19. Miyauchi, Y., Ozaki, M., Doutan, Y., Okiwara, R. and Usami, D. (1996), "Experimental study on a concrete-filled steel structure, compressive test (2)", Architectural Institute of Japan Conference - Part 2, 1073-1074
  20. Takeuchi, M., Narikawa, M., Matsuo, I., Hara, K. and Usami, S. (1998), "Study on a concrete-filled structure for nuclear power plants", Nuclear Eng. Design, 179(2), 209-223. https://doi.org/10.1016/S0029-5493(97)00282-3
  21. Tao Z., Han L. H. and Wang D. Y. (2008), "Strength and ductility of stiffened thin-walled hollow steel structural stub columns filled with concrete," Thin-Walled Struct., 46(10), 1113-1128. https://doi.org/10.1016/j.tws.2008.01.007
  22. Tao, Z., Uy, B., Han, L.H. and Wang, Z.B. (2009), "Analysis and design of concrete-filled stiffened thin-walled steel tubular columns under axial compression," Thin-Walled Struct., 47(12), 1544-1556. https://doi.org/10.1016/j.tws.2009.05.006
  23. Uy, B. and Bradford, M.A. (1996), "Elastic local buckling of steel plates in composite steel-concrete members", Eng. Struct., 18(3), 193-200. https://doi.org/10.1016/0141-0296(95)00143-3
  24. Uy, B. (2001), "Strength of short concrete filled high strength steel box columns", J. Construct. Steel Res., 57(2), 113-134. https://doi.org/10.1016/S0143-974X(00)00014-6
  25. Uy, B., Tao, Z. and Han, L.H. (2011), "Behavior of short and slender concrete-filled stainless steel tubular columns", J. Construct. Steel Res., 67(2), 360-378. https://doi.org/10.1016/j.jcsr.2010.10.004
  26. Vrcelj, Z. and Uy, B. (2002), "Strength of slender concrete-filled steel box columns incorporating local buckling", J. Construct. Steel Res., 58(2), 275-300. https://doi.org/10.1016/S0143-974X(01)00045-1

Cited by

  1. Development of a simplified equivalent braced frame model for steel plate shear wall systems vol.18, pp.3, 2015, https://doi.org/10.12989/scs.2015.18.3.711
  2. A state-of-the-art review on double-skinned composite wall systems vol.97, 2015, https://doi.org/10.1016/j.tws.2015.09.007
  3. Buckling behavior of double-skin composite walls: An experimental and modeling study vol.121, 2016, https://doi.org/10.1016/j.jcsr.2016.01.019
  4. PERFORMANCE STUDY OF SC WALL BASED ON EXPERIMENT AND PARAMETRIC ANALYSIS vol.26, pp.3, 2020, https://doi.org/10.3846/jcem.2020.12181
  5. Concrete-filled twin-layer steel-sheet CWs system: A systematic review of the literature vol.18, pp.6, 2013, https://doi.org/10.1590/1679-78256622