Journal of the Korean Institute of Electrical and Electronic Material Engineers (한국전기전자재료학회논문지)

The Korean Institute of Electrical and Electronic Material Engineers (한국전기전자재료학회)
권호 표지
DOI QR코드

DOI QR Code

A Study on the Insulation and Electrical Degradation Properties of Heat Resistance Epoxy Powder for Busduct

부스닥트용 내열성 에폭시 분체도료의 절연 및 열화 특성 연구

  • Kang, Cheolhwa (Department of Fire & Disaster Engineering, International University of Korea) ;
  • Park, Ji-Koon (Department of Radiological Science, International University of Korea) ;
  • Park, Jong-Kyu (Department of Electricity, Gyeongnam Provincial Namhae College) ;
  • Ju, Hyun-Don (Department of Fire & Disaster Engineering, International University of Korea) ;
  • Kim, Hyun-Hee (Department of Fire & Disaster Engineering, International University of Korea)
  • 강철화 (한국국제대학교 소방방재학과) ;
  • 박지군 (한국국제대학교 방사선학과) ;
  • 박종규 (경남도립남해대학 전기과) ;
  • 주현돈 (한국국제대학교 소방방재학과) ;
  • 김현희 (한국국제대학교 소방방재학과)
  • Received : 2013.08.12
  • Accepted : 2013.08.23
  • Published : 2013.09.01
Download PDF
⟨ Previous Next ⟩

Abstract

Reported here are results of the mechanical and electrical properties of both of intact and thermally degraded epoxy-coated copper busducts that are made by fluidized bed process. To elucidate and compare the properties mentioned above, electrical breakdown by thermal and water aging, v-t characteristic, bending test, impact test and cross cut test are carried out. Although the performance of electrical and mechanical properties are gradually decreased in increasing the severe conditions such as temperature, aging time, and so forth, sample C has a better performance in both mechanical and electrical properties.

Keywords

References

  1. K. C. Agrawal (Elsevier, 2001) p. 916
  2. Kumar, G.V.N. Amarnath, J. Singh, and B. P. Chowdary (India Conference, 200, Annual IEEE/2, 2008) p. 465.
  3. A. M. Matawie and E. M. Sadek, Polym. Adv. Technol., 10, 223 (1999). https://doi.org/10.1002/(SICI)1099-1581(199904)10:4<223::AID-PAT865>3.0.CO;2-7
  4. J. H. Bae and H. J. Kim, The Transactions of the Korean Institute of Electrical Engineers B, 55, 628 (2006).
  5. S. Skale, V. Dolecek, and M. Slemnik, Prog. in Organic Coatings, 62, 387 (2008). https://doi.org/10.1016/j.porgcoat.2008.02.003
  6. K. Strzelec and P. Pospiech, Prog. in Organic Coatings, 63, 133 (2008). https://doi.org/10.1016/j.porgcoat.2008.04.015
  7. C. Maggana and P. Pissis, J. Polym. Sci.: Part B, Polym. Phys., 37, 1165 (1999). https://doi.org/10.1002/(SICI)1099-0488(19990601)37:11<1165::AID-POLB11>3.0.CO;2-E
  8. B. S. Lee, I. K. Song, J. B. Lee, and S. O. Han, J. KIEEME, 16, 1136 (2003).
  9. KS C IEC 60243-1, 2 (2002).
  10. G. Z. Xiao and M. E. R. Shanahan, J. Polym. Sci: Part B, Polym. Phys., 35, 2659 (1998).
  11. R. A. Perthric, E. A. Holins, I. McEwan, E. A. Pollock, and D. Hayward, Polymer International, 39, 275 (1996). https://doi.org/10.1002/(SICI)1097-0126(199604)39:4<275::AID-PI508>3.0.CO;2-I
  12. J. S. White, Technometrics, 11, 373 (1969). https://doi.org/10.1080/00401706.1969.10490691
  13. V. Ashworth and Fairhurst, J. Electrochem. Soc., 124, 506 (1977). https://doi.org/10.1149/1.2133338
  14. S. H. Kim, J. O. Choi, D. O. Kim, and H. H. Kim, J. KIEEME, 22, 210 (2009).