참고문헌
- M. J. Vick, K. Gramoll, 2012, Finite Element Study on the Optimization of an Orthotropic Composite Toroidal Shell, J. Press. Vess. Technol., Vol. 134, No. 5, Article No. 051201.
- J. H. Kim, K. B. Shin, T. K. Hwang, 2013, Study on Size Optimization for Skirt Structure of Composite Pressure Vessel, Trans. Kor. Soc. Mech. Eng. A, Vol. 37, No. 1, pp. 31-37. https://doi.org/10.3795/KSME-A.2013.37.1.031
- Y. B. Yoon, S. W. Cho, S. K. Ha, 2002, Optimal Design of Filament Wound Composite CNG Pressure Vessel, Trans. Kor. Soc. Mech. Eng. A, Vol. 26, No. 1, pp. 23-30. https://doi.org/10.3795/KSME-A.2002.26.1.023
- J. S. Kim, S. G. Lee, T.E. Jin, 2002, Development and Evaluation of Predictive Model for Microstructures and Mechanical Properties in Heat Affected Zone of Pressure Vessel Steel Weld, Trans. Kor. Soc. Mech. Eng. A, Vol. 26, No. 11, pp. 2399-2408. https://doi.org/10.3795/KSME-A.2002.26.11.2399
- H. S. Lee, J. H. Yoon, J. S. Park, Y. M. Yi, 2005, A Study on Failure Characteristic of Spherical Pressure Vessel, J. Mater. Process. Technol., Vol. 164, pp. 882-888.
- W. C. Jiang, X. W. Guan, 2013, A Study on the Residual Stress and Deformation in the Welding Between Half-pipe Jacket and Shell, Mater. Des., Vol. 43, pp. 213-219. https://doi.org/10.1016/j.matdes.2012.07.003
- ASTM International, 2009, Standard Rest Methods of Compression Testing of Metallic Materials at Room Temperature, ASTM E9-09.
- KSA, 2002, Aluminum and Aluminum Alloy Extruded Shapes, KS D 6759.
- D. J. Yoon, S. Y. Hahm, Y. S. Lee, 2012, A Study on Forming of Al-Zn-Mg-Sc Aluminum Alloy Bolts, Trans. Mater. Process., Vol. 21, No. 7, pp. 447-452. https://doi.org/10.5228/KSTP.2012.21.7.447
- D. H. Yoon, J. E. Jung, Y. W. Chang, J. H. Lee, K. S. Lee, 2012, Influence of High Temperature Deformation Process Variables on the Microstructure and Thermo-physical Properties of a Ni-Fe-Co Alloy, Trans. Mater. Process., Vol. 21, No. 3, pp. 207-214. https://doi.org/10.5228/KSTP.2012.21.3.207
- J. H. Kang, B. H. Ko, J. S. Jae, S. S. Kang, 2005, Lubrication and Cooling Characteristics of Warm Forging Lubricants, Trans. Mater. Process., Vol. 14, No. 7, pp.619-623. https://doi.org/10.5228/KSPP.2005.14.7.619
- D. J. Jeong, D. J. Kim, J. H. Kim, B. M. Kim, T.A. Dean, 2001, Effects of Surface Treatments and Lubricants for Warm Forging Die Life, J. Mater. Process. Technol., Vol. 113, No. 1-3, pp. 544-550. https://doi.org/10.1016/S0924-0136(01)00693-8