The Transactions of the Korean Institute of Power Electronics (전력전자학회논문지)

The Korean Institute of Power Electronics (전력전자학회)
권호 표지
DOI QR코드

DOI QR Code

IPMSM Sensorless Control Using Square-Wave-Type Voltage Injection Method with a Simplified Signal Processing

구형파 신호 주입을 이용한 IPMSM 센서리스 제어에서 개선된 신호처리 기법

  • Park, Nae-Chun (Dept. of Electric & Electrical Engineering, Kangwon Nat'l University) ;
  • Kim, Sang-Hoon (Dept. of Electric & Electrical Engineering, Kangwon Nat'l Univ.)
  • Received : 2012.12.05
  • Accepted : 2013.02.05
  • Published : 2013.06.20
Download PDF
⟨ Previous Next ⟩

Abstract

This paper presents an improved signal processing technique in the square-wave-type voltage injection method for IPMSM sensorless drives. Since the sensorless method based on the square-wave voltage injection does not use low-pass filters to get an error signal for estimating rotor position and allows the frequency of the injected voltage signal to be high, the sensorless drive system may achieve an enhanced control bandwidth and reduced acoustic noise. However, this sensorless method still requires low-pass and band-pass filters to extract the fundamental component current and the injected frequency component current from the motor current, respectively. In this paper, these filters are replaced by simple arithmetic operations so that the time delay for estimating the rotor position can be effectively reduced to only one current sampling. Hence, the proposed technique can simplify its whole signal process for the IPMSM sensorless control using the square-wave-type voltage injection. The proposed technique is verified by the experiment on the 800W IPMSM drive system.

Keywords

References

  1. N. Bianchi and T.M. Jahns, "Design analysis, and control of interior PM synchronous machines," in Tutorial Course Notes, IEEE IAS Annu. Meeting, Seatle, WA, pp. 1.1-1.10 ,2004,
  2. Sang-Hoon Kim, DC AC BLDC Motors Control, Chap.6, Bogdoo, Ver.3, 2012.
  3. C. Schauder, "Adaptive speed identification for vector control of induction motors without rotational transducers," IEEE IAS Annu. Mtg. Conf. Rec., pp. 493-499, 1989.
  4. N. Matsui, "Sensorless PM brushless dc motor drives," IEEE Trans. Ind. Electron., Vol. 43, pp. 300-308, 1996. https://doi.org/10.1109/41.491354
  5. S. Morimoto, K. Kawamotor, M. Sanada, and Y. Takeda, "Sensorless control strategy for salient-pole PMSM based on extended EMF in rotating reference frame," IEEE Trans. Ind. Appl., Vol. 38, No. 4, pp. 1054-1061, 2002. https://doi.org/10.1109/TIA.2002.800777
  6. J. I. Ha and S. K. Sul, "Sensorless field-orientation control of an induction machine by high-frequency signal injection," IEEE Trans. Ind. Appl. Vol. 35, No. 1, pp. 45-51, 1999.
  7. P. L. Jasnsen and R. D. Loesnz, "Transducerless position and velocity estimation in induction and salient ac machines," IEEE Trans. Ind. Appl., Vol. 31, No. 2, pp. 240-247, 1995. https://doi.org/10.1109/28.370269
  8. Y. D. Yoon, S. K. Sul, S. Morimoto and K. Ide, "High bandwidth sensorelss algorithm for ac machines based on square-wave-type voltage injection," IEEE Trans. Ind. Appl., Vol. 47, No. 3, pp. 1361-1370, 2011. https://doi.org/10.1109/TIA.2011.2126552
  9. S. M. Kim, J. I. Ha, S. K. Sul, "PWM switching frequency signal injection sensorless method in IPMSM," IEEE Trans. Ind. Appl., Vol. 48, No. 5, pp. 1576-1587, 2012. https://doi.org/10.1109/TIA.2012.2210175