한국자동차공학회논문집 (Transactions of the Korean Society of Automotive Engineers)

  • 제21권4호
  • /
  • Pages.128-134
  • /
  • 2013
  • /
  • 1225-6382(pISSN)
  • /
  • 2234-0149(eISSN)
한국자동차공학회 (The Korean Society of Automotive Engineers)
권호 표지
DOI QR코드

DOI QR Code

굽힘 붕괴 성능 향상을 위한 센터 필라 설계

Center Pillar Design for High Bending Collapse Performance

  • 강성종 (대구가톨릭대학교 기계자동차공학부) ;
  • 박명재 (대구가톨릭대학교 대학원 자동차공학과)
  • Kang, Sungjong (School of Mechanical and Automotive Engineering, Catholic University of Daegu) ;
  • Park, Myeongjae (Graduate school of Automotive Engineering, Catholic University of Daegu)
  • 투고 : 2012.09.25
  • 심사 : 2013.01.15
  • 발행 : 2013.07.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

High bending collapse performance (maximum resistance force and mean resistance force) of body center pillar is an important design target for vehicle safety against side impact. In this study, effect of the upper section shape and the thickness of outer reinforcement on bending collapse performance was investigated for the center pillar of a large passenger car. First, through bending collapse analyses using simple models with uniform section, an optimized center pillar upper section was chosen. Next, bending collapse performance for various models of the actual center pillar with changing the thickness of outer reinforcement were analyzed. The finally designed model showed distinctive enhancement in bending collapse performance nearly without weight increase.

키워드

참고문헌

  1. S. J. Kang, "Roof Crush Analysis Technique Using Simple Model with Plastic Hinge Concepts," Transactions of KSAE, Vol.4, No.6, pp.216-222, 1996.
  2. H. Y. Kim, J. K. Kim, S. J. Heo and H. Kang, "Design of the Impact Energy Absorbing Member and Evaluation of the Crashworthiness for Aluminum Intensive Vehicle," Transactions of KSAE, Vol.10, No.1, pp.216-233, 2002.
  3. K. Ishida, M. Fukahori, K. Hanakawa, H. Tanaka and K. Matsuda, "Development of a Technique to Strengthen Body Frame with Structural Foam," SAE 2001-01-0313, 2001.
  4. B. J. Kim and S. J. Heo, "Collapse Characteristics of Aluminum Extrusions Filled with Structural Foam for Space Frame Vehicles," Int. J. Automotive Technology, Vol.4, No.3, pp.141-147, 2003.
  5. I. S. Lee and S. J. Kang, "Foam Filling Effect on Bending Collapse Characteristics for Member Section Type," Transactions of KSAE, Vol.15, No.2, pp.41-49, 2007.
  6. H. Huh, J. H. Lim, J. H. Song, K. S. Lee, Y. W. Lee and S. S. Han, "Crashworthiness Assessment of Side Impact of an Auto-body with 60Trip Steel for Side Members," Int. J. Automotive Technology, Vol.4, No.3, pp.149-156, 2003.
  7. LS-DYNA User's manual, Nonlinear Dynamic Analysis of Structures, Ver.971, LSTC, 2006.