DOI QR코드

DOI QR Code

A Study on Development of Test Site for Wind Turbine Prototype Test

풍력터빈시험을 위한 실증시험장 개발에 관한 연구

  • Moon, Chae-Joo (Smartgrid Research Institute, Dept. of Electrical Engineering of Mokpo National University) ;
  • Chang, Young-Hag (Smartgrid Research Institute, Dept. of Control & Robot Engineering of Mokpo National University) ;
  • So, Soon-Yeol (Smartgrid Research Institute, Dept. of Electrical Engineering of Mokpo National University) ;
  • Kim, Tae-Gon (Smartgrid Research Institute, Dept. of Electrical Engineering of Mokpo National University) ;
  • Kim, Young-Gon (Smartgrid Research Institute, Dept. of Electrical Engineering of Mokpo National University) ;
  • Jeong, Moon-Seon (Smartgrid Research Institute, Dept. of Electrical Engineering of Mokpo National University) ;
  • Jeong, Seong-Won (Jeonnam Technopark)
  • 문채주 (목포대학교 스마트그리드연구소, 전기공학과) ;
  • 장영학 (목포대학교 스마트그리드연구소, 제어로봇공학과) ;
  • 소순열 (목포대학교 스마트그리드연구소, 전기공학과) ;
  • 김태곤 (목포대학교 스마트그리드연구소, 전기공학과) ;
  • 김영곤 (목포대학교 스마트그리드연구소, 전기공학과) ;
  • 정문선 (목포대학교 스마트그리드연구소, 전기공학과) ;
  • 정승원 (전남 테크노파크)
  • Received : 2013.02.15
  • Accepted : 2013.04.19
  • Published : 2013.04.30

Abstract

It is evident that in the wind energy business as an economic activity there is a close relationship between the wind speed and the revenues. The wind turbine test facility for wind turbine accreditation is intended to be used by the industry for testing of both main components and systems. This paper suggest the wind test site for certification of prototype wind turbine with international regulations. The test site has an environmental permit for wind turbines with a maximum hub height of 120m and a rotor diameter up to 120m, and can accommodate prototypes with installed electrical powers up to 5MW each. A wind turbine manufacturer can lease the location for a period of type certification. And also researchers are the development of new methods for measuring the influence, performance and durability of the components, a mathematical and numerical modelling of component responses by using the site.

Keywords

References

  1. BTM Consult, A Part of Navioant, 2012
  2. 황병선, "최신풍력터빈의 이해", 2010
  3. 고석환, "풍력발전기 성능평가 측정시스템에 관한 연구", 공주대학교, 2011
  4. 한국선급, "해상풍력발전시스템의 기술기준", 2011
  5. DNV KEMA, "Wind Turbine Certification", 2012
  6. 전남테크노파크,"풍력시스템 테스트베드 구축사업 계획서",2011
  7. 정권성 "풍력시스템의 성능평가와 인증을 위한 Test-Site구축에 관한 연구" 목포대학교, 박사학위논문, 2012
  8. IEC Standard 61400-12-1, Wind turbines -Part12-1: Power performance measurements of electricity producing wind turbines, 3rd Ed., 2005
  9. 김영곤, 김태곤, 문채주, 정승원, 정권성 "중대형 풍력발전기의 성능평가를 위한 대형기상탑 설계" 한국풍력에너지학회, 2012