한국분무공학회지 (Journal of ILASS-Korea)

  • 제18권1호
  • /
  • Pages.55-60
  • /
  • 2013
  • /
  • 1226-2277(pISSN)
  • /
  • 2288-9051(eISSN)
한국분무공학회 (Institute for Liquid Atomization and Spray Systems-Korea)
권호 표지
DOI QR코드

DOI QR Code

DME 커먼레일 시스템을 위한 인젝터 분사 유량 개선

Injection Flow Rate Improvement of Injectors for DME Common-rail Systems

  • 투고 : 2013.02.15
  • 심사 : 2013.03.15
  • 발행 : 2013.03.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

In this study, injection flow rates and material of the solenoid sealing of the injectors were improved for the development of a di-methyl Ether(DME) common-rail system. To deliver the same amount of energy provided by injection pressure of diesel $P_{inj}$ = 160 MPa, the DME injectors need to have larger diameter of nozzle hole and more No. of hole at low injection pressure of $P_{inj}$ = 40~50 MPa. The simplified nozzle flow model, which takes account of nozzle geometry and injection condition, was employed in order to design the concept of a injector nozzle such as No. of hole, diameter of hole and diameter of needle seat, etc. Injection amount and rate were tested by diesel and DME test stand. As a result, the diameter of nozzle hole were enlarged by 0.25 mm. The diameter of the orifice in the high pressure line was increased by 1.0 mm to maintain hydraulic force in the nozzle. The material of the solenoid sealing was changed to HNBR, which was strong against the corrosive. Experimental results showed that the injection amount of the DME injector drastically increased by 191.9% comparison to that of diesel at $P_{inj}$ = 40 MPa.

키워드

참고문헌

  1. S. Yoon, S. Lee and S. Chung, "PAH and Soot Formation Characteristics of DME/Ethylene Fuel", Transactions of KSAE, Vol. 13, No. 3, p. 171-177, 2005.
  2. Y. D. Pyo, G. C. Kim, Y. J. Lee and M. C. Kim, "A Study on Performance and Exhaust Emissions of DI Diesel Engine Operated with Neat DME and DME Blended Fuels", Transactions of KSAE, Vol. 11, No. 2, 2003, pp. 75-82.
  3. M. Y. Kim, S. H. Yoon, B. W. Ryu and C. S. Lee, "Combustion and emission characteristics of DME as an alternative fuel for compression ignition engines with a high pressure injection system", Fuel, Vol. 87, 2008, pp. 2779-2786. https://doi.org/10.1016/j.fuel.2008.01.032
  4. J. W. Chung, N. H. Kim, J. H. Kang, S. W. Park, H. K. Lee and S. K. Choi, "A Study on the DME Application Performance of a High Pressure Fuel Pump for an Electric Controlled Common-rail Compression Ignition Engine", Transactions of KSAE, Vol. 17, No. 2, 2009, pp. 132-140.
  5. S. D. Oh, J. K. Park, G. S. Lee, Y. D. Pyo, S. J. Jeong, "Performance Characteristics of 3L CRDI DME Prototype Engine", Annual Conference Proceedings, KSAE, 2011, pp. 649-652.
  6. C. Arcoumanis, C. S. Bae, R. Crookes and E. Kinoshita, "The potential of di-methyl ether (DME) as an alternative fuel for compression-ignition engines: A review", Fuel, Vol. 87, 2008, pp. 1014-1030. https://doi.org/10.1016/j.fuel.2007.06.007
  7. D. J. Kim, G. S. Lee, H. C. Kim, S. D. Oh, S. J. Jeong, Y. D. Pyo, "Injector Nozzle Design for DME Commonrail System", Annual Conference Proceedings, KSAE, 2011, pp. 889-894.
  8. C. von Kuensberg Sarre, S. C. Kong and R. D. Reitz, "Modeling the Effects of Injector Nozzle Geometry on Diesel Sprays", SAE paper 1999, 1999-01-0912.
  9. Y. Zhu and R. D. Reitz, "Modeling Fuel System Performance and Its Effect on Spray Characteristics", SAE paper 2000, 2000-01-1253.
  10. W. Ning, R. D. Reitz, R. Diwakar and A. M. Lippert, "A Numerical Investigation of Nozzle Geometry and Injection Condition Effects on Diesel Fuel Injector Flow Physics", SAE paper 2008, 2008-01-0936.
  11. R. P. Benedict, Fundamental of Pipe Flow, Wiley, New York, 1980.