International Journal of Naval Architecture and Ocean Engineering

  • 제5권1호
  • /
  • Pages.116-131
  • /
  • 2013
  • /
  • 2092-6782(pISSN)
  • /
  • 2092-6790(eISSN)
대한조선학회 (The Society of Naval Architects of Korea)
권호 표지
DOI QR코드

DOI QR Code

Numerical and experimental investigation of the resistance performance of an icebreaking cargo vessel in pack ice conditions

  • Kim, Moon-Chan (Department of Naval Architecture & Ocean Engineering, Pusan National University) ;
  • Lee, Seung-Ki (Department of Naval Architecture & Ocean Engineering, Pusan National University) ;
  • Lee, Won-Joon (Department of Naval Architecture & Ocean Engineering, Pusan National University) ;
  • Wang, Jung-Yong (Ocean, Coastal and River Engineering, National Research Council, St. John's)
  • 발행 : 2013.03.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The resistance performance of an icebreaking cargo vessel in pack ice conditions was investigated numerically and experimentally using a recently developed finite element (FE) model and model tests. A comparison between numerical analysis and experimental results with synthetic ice in a standard towing tank was carried out. The comparison extended to results with refrigerated ice to examine the feasibility of using synthetic ice. Two experiments using two different ice materials gave a reasonable agreement. Ship-ice interaction loads are numerically calculated based on the fluid structure interaction (FSI) method using the commercial FE package LS-DYNA. Test results from model testing with synthetic ice at the Pusan National University towing tank, and with refrigerated ice at the National Research Council's (NRC) ice tank, are used to validate and benchmark the numerical simulations. The designed ice-going cargo vessel is used as a target ship for three concentrations (90%, 80%, and 60%) of pack ice conditions. Ice was modeled as a rigid body but the ice density was the same as that in the experiments. The numerical challenge is to evaluate hydrodynamic loads on the ship's hull; this is difficult because LS-DYNA is an explicit FE solver and the FSI value is calculated using a penalty method. Comparisons between numerical and experimental results are shown, and our main conclusions are given.

키워드

참고문헌

  1. Gagnon, R.E., 2007. Results of numerical simulations of growler impact tests. Cold Regions Science and Technology, 49(3), pp.206-214. https://doi.org/10.1016/j.coldregions.2007.03.016
  2. Hallquist, J.O., 2007. Ls-dyna keyword user's manual (version 971). Livermore Software Technology Corp, Livermore, USA.
  3. Jones, S.J., 1987.Ice tank test procedure at the institute for marine dynamics. Institute for Ocean Technology, National Research Council of Canada, Report No. LM-AVR-20.
  4. Kim, M.C., Lim, T.W., Jo, J.C., Chun, H.H. and Wang, J.Y., 2009.Comparison study on the propulsion performance for icebreaker with synthetic ice and refrigerated ice. Journal of Ocean Engineering and Technology, 23(1), pp.129-134.
  5. Kwok, R.and Cunningham, G.F., 2011. Deformation of the Arctic Ocean ice cover after the 2007 record minimum in summerice extent.Cold Regions Science and Technology, 76-77, pp.17-23.
  6. Lee, S.H., Kim, M.C., Chun, H.H., Cho, J.C., Shin, B.C. and Jung, U.H., 2009. Study on resistance performance of icebreaker cargo vessel in pack ice condition according to variation of synthetic ice thickness and hull form characteristics. Journal of the Society of Naval Architectures of Korea, 46(5), pp.471-478. https://doi.org/10.3744/SNAK.2009.46.5.471
  7. LS-DYNA, 2006. Theoretical manual. Livermore Software Technology Corporation, USA.
  8. Raed, L. and Sveinung, L., 2011. A numerical model for real-time simulation of ship-ice interaction. Cold Regions Science and Technology, 65(2), pp.111-127. https://doi.org/10.1016/j.coldregions.2010.09.004
  9. Song, Y.Y., Kim, M.C. and Chun, H.H., 2007. A study on resistance test of icebreaker with synthetic ice. Journal of the Society of Naval Architectures of Korea, 44(4), pp.389-397. https://doi.org/10.3744/SNAK.2007.44.4.389
  10. Timco, G.W., 1986. EG/AD/S: A new type of model ice for refrigerated towing tanks. Cold Regions Science and Technology, 12(2), pp.175-195. https://doi.org/10.1016/0165-232X(86)90032-7
  11. Valanto, P., Jones, S.J., Enkvist, E. and Izumiyama, K., 2001. The resistance of ships in level ice. Society of Naval Architects and Marine Engineers Transactions, (109), pp.53-83.
  12. Wang, J.Y. and Derradji, A., 2010. Ship performance in broken ice floes - Preliminary numerical simulations. Institute for Ocean Technology, National Research Council, St. John's, NL, Canada, Report No.TR-2010-24.
  13. Wang, J.Y. and Derradji, A., 2011. Numerical assessment for stationary structure (Kulluk) in moving broken ice. Proceedings of the 21st International Conference, Port and Ocean Engineering under Arctic Conditions. Montreal, Canada, POAC11-172.
  14. Wang, J.Y. and Gagnon, R.E., 2012. Numerical simulations of a tanker collision with a bergy bit incorporating hydrodynamics, a validated ice model and damage to the vessel. Cold Regions Science and Technology, 81, pp.26-35. https://doi.org/10.1016/j.coldregions.2012.04.006