참고문헌
- Jang DS, Yu SH and Lee KS, Int. J. Heat & Mass Trans., "Multidisciplinary optimization of a pin-fin radial heat sink for LED lighting applications", 55 (2012) 515-521. https://doi.org/10.1016/j.ijheatmasstransfer.2011.11.016
- Reddy GP and Gupta N, Materials and Design, "Material selection for microelectronic heat sinks", 31 (2010) 113-117. https://doi.org/10.1016/j.matdes.2009.07.013
- Keller KP, Proc. of Inter. Electronic Packaging Conf., "Efficiency and cost tradeoffs between aluminum and zinc die cast heatsinks", (1997).
- Keller KP, Proc. of 1998 IEMT-Europe Symposium, "Low cost, high performance, high volume heatsinks", Berlin (1998).
- Ferlini S, Morri A, Ferri E, Merlin M and Giacomozzi G, Proc. of the 3rd Iner. Conf. on High Tech Die Casting, "Effect of silicon particles and roughness on the surface treatments of cast aluminum alloys", Vicenza (2006).
- Hatch JE, "Aluminum-Properties and Physical Metallurgy", 10th ed., ASM, Ohio (2005).
- Gale WF, Totemeier TC, "Smithells Metals Reference Book", 8th ed., ASM, Oxford (2004).
- Dinsdale AT, Quested PN, Journal of Materials Science, "The viscosity of aluminum and its alloys-A review of data and models", 39 (2004) 7221-7228. https://doi.org/10.1023/B:JMSC.0000048735.50256.96
- Woodcraft AL, Cryogenics, "Recommended values for the thermal conductivity of aluminium of different purities in the cryogenic to room temperature range, and a comparison with copper", 45 (2005) 626-636. https://doi.org/10.1016/j.cryogenics.2005.06.008
- Flemings MC, "Solidification processing", McGRAW-HILL (1974).
- Poirier DR and Geiger GH, "Transport Phenomena in Materials Processing", TMS (1994).
- Bastien P, Armbruster JC and Azov P, AFS Trans., "Flowability and viscosity", 70 (1962) 400-409.
-
Han Y, Ban C, Guo S, Liu X, Ba Q and Cui J, Materials Letters, "Alignment behavior of primary
$Al_3Fe$ phase in Al-Fe alloy under a high magnetic field", 61 (2007) 983-986. https://doi.org/10.1016/j.matlet.2006.06.027 - Taghaddos E, Hejazi MM, Taghiabadi R and Shabestari SG, Journal of Alloys and Compounds, "Effect of iron-intermetallics on the fluidity of 413 aluminum alloy", 468 (2009) 539-545. https://doi.org/10.1016/j.jallcom.2008.01.079
- Darvishi A, Maleki A, Atabaki MM and Zargami M, MJoM, "The mutual effect of iron and manganese on microstructure and mechanical properties of aluminum-silicon alloy", 16 (2010) 11-24.
피인용 문헌
- Thermal Properties of Diamond Aligned Electroless Ni Plating Layer/Oxygen Free Cu Substrates vol.22, pp.2, 2015, https://doi.org/10.4150/KPMI.2015.22.2.134
- Effects of Alloying Elements on the Properties of High Strength and High Thermal Conductivity Al-Zn-Mg-Fe Alloy for Die Casting vol.33, pp.4, 2013, https://doi.org/10.7777/jkfs.2013.33.4.171
- Effects of Zn and Mg Amounts on the Properties of High Thermal Conductivity Al-Zn-Mg-Fe Alloys for Die Casting vol.33, pp.3, 2013, https://doi.org/10.7777/jkfs.2013.33.3.113
- A Study of Characteristics of the LED Heat Dissipation According to the Changes in Composition of Die-casting Aluminum vol.27, pp.8, 2014, https://doi.org/10.4313/JKEM.2014.27.8.535
- 다이캐스팅 공정으로 제조한 ADC12 알루미늄 합금의 물성 향상 및 진공 열처리 효과 vol.31, pp.1, 2021, https://doi.org/10.6111/jkcgct.2021.31.1.024