참고문헌
- Cardarelli F, Materials Handbook, Springer (2000) 45-57.
- Ravi KR, Pillai RM, Amaranathan KR, Pai BC and Chakraborty M, J. Alloys Compounds, "Fluidity of aluminum alloys and composites: a review", 456 (2008) 201-210. https://doi.org/10.1016/j.jallcom.2007.02.038
- Kwon YD and Lee ZH, Mater. Sci. Eng. A, "The effect of grain refining and oxide inclusion on the fluidity of Al-4.5Cu-0.6Mn and A356 alloys", 360 (2003) 372-376. https://doi.org/10.1016/S0921-5093(03)00504-5
- Campbell J, Castings, Butterworth-Heinemann (2003) 242- 258.
- Eskin DG, Suyitno and Katgerman L, Progress Mater. Sic., "Mechanical properties in the semi-solid state and hot tearing of aluminium alloys", 49 (2004) 629-711. https://doi.org/10.1016/S0079-6425(03)00037-9
- Liang SM, Chen RS, Blandin JJ, Suery M and Han EH, Mater. Sci. Eng., "Thermal analysis and solidification pathways of Mg-Al-Ca system alloys", A480 (2008) p. 365-372.
- Belov NA, Aksenov AA and Eskin DG, Iron in Aluminum Alloys Impurity and Alloying Element, Taylor & Francis (2002) 24-238.
- Belmares-Perales S and Zaldivar-Cadena AA, Mater. Sci. Eng. B, "Addition of iron for the removal of the beta-AlFeSi intermetallic by refining of alpha-AlFeSi phase in an Al-7.5Si- 3.6Cu alloy", 174 (2010) 191-195. https://doi.org/10.1016/j.mseb.2010.03.032
- Davis JR, ASM Specialty Handbook: Aluminum and Aluminum Alloys, ASM International (1993) 722-723.
- Kim JM and Loper CR, AFS Trans., "Effect of solidification mechanism on fluidity of Al-Si casting alloys", 103 (1995) 521- 529.
- Dash M, Makhlouf M, J. Light Metals, "Effect of key alloying elements on the feeding characteristics of aluminum-silicon casting alloys", 1 (2001) 251-265. https://doi.org/10.1016/S1471-5317(02)00002-0
피인용 문헌
- Improved Corrosion Resistance of 5XXX Aluminum Alloy by Homogenization Heat Treatment vol.8, pp.1, 2018, https://doi.org/10.3390/coatings8010039