DOI QR코드

DOI QR Code

A Study on Drive in Extending Break Power of The PMSM using series Resistor

영구 자석형 동기전동기(PMSM)의 직렬저항을 이용한 제동력 운전 확보에 관한 연구

  • 황락훈 (세명대학교 전기공학과 전력전자 연구실) ;
  • 나승권 (한국폴리텍대학 원주캠퍼스 의용공학과) ;
  • 김영복 (세명대학교 전기공학과) ;
  • 정남길 (세명대학교 전기공학과)
  • Received : 2012.11.01
  • Accepted : 2013.02.28
  • Published : 2013.02.28

Abstract

In this paper, method using electric braking from stop area to high-speed area was presented in order to improve air-brake. And electric braking method can be improved environmental problems, efficiency, economy, etc. Method for electrical complete braking are two ways that method of inserting series resistance between the motor and the inverter, and method of inverter output voltage increase. In this paper, use series resistance insert method because economical and easy to apply. In addition, Series resistor is used short circuit method for reduce the power loss. In improved efficiency and the laboratory environment for secure braking, resistance insert method and inverter output voltage increase method showed same characteristics in all areas.

본 논문에서는 공기제동의 문제점을 보완하기 위한 유지보수와 환경문제, 효율성, 경제성 등을 개선하기 위하여 정지에서 고속영역까지의 전 영역에서 전기제동을 사용하는 방법이 제시되었다. 전기적으로 완전제동을 위한 2가지 방법으로 인버터 출력전압의 증대에 의한 방법과 전동기와 인버터 사이에 직렬저항을 삽입하는 방법을 통하여 경제적이며 실제 적용이 가능한 제어방법인 직렬저항을 삽입하는 방법을 적용하기로 하였다. 직렬저항에 의한 전력손실을 감소시키기 위한 직렬저항을 단락 하는 방법을 사용하여 효율을 개선하고 전 영역에서의 제동력확보는 실험환경 내에서 우수한 인버터의 단자전압을 상승시키는 방법과 동일한 특성을 보였다.

Keywords

References

  1. T. Suzuki, T. Koseki, S. Sone, A Study on a Method of Train Automatic Stopping Control with a Pure Electric Brake I.E.E.Japan Joint Technical Meetingon Transportation & Electric Railwaysand Linear Driver, TER-00-37LD-00-64, pp.15-18, July 2000.
  2. L. Kovudhikulrungsri, T. Koseki, "Speed Estimation in Low-Speed Range for an Induction Motor to Realize Pure Electric Brake", I.E.E. Japan Joint Technical Meetingon Transportation & Electric Railwaysand Linear Drive, TER-00-38LD-00-65, pp.19-24, July 2000.
  3. S. Takashi, K. Takafumi, "Simple Train Automatic Stopping Control with Constant Power Braking Pattern Supposing the Pure Electric Brake." I.E.E. Japan 2001 Japan Industry Applications Society Conference (JISAC2001), Vol. 3, pp. 1285-1288, August 2001.
  4. H. Tabuchi, T. Suzuki, T. Koseki, "A Proposal and Study on Braking Signs for Increasing Rate of Electric Brake", 2001 National Convention Record, I.E.E. Japan, Vol. 5, No. 253, pp. 2092-2093, March 2001.
  5. Dong-Sup Oh, Sung-Eop Oh, Min-Ho Park, Se-Jin, Seong, In-Su, Km "A Study on high speed Motor controller using DSP, Power Electronics Conference, Proceedings of the 2005
  6. Jung-Seok Yun, Kwang-Heon, Kim"Permanent magnet synchronous motor (PSPM) technical design and magnetization" Journal of Power Electronics , Vol 7, No 5, 2002.
  7. Lark-Hoon Hwang, Seung-Kown Na, Ji-Cheol Park, Seung-Wook Kang, Ik-Soo Ahn, Jong-Rae Kim "A Study on Extending Break Power of The PMSM using series Resistor" 2012 Spring Conference of the Korean Society for Railway, Proceedings of the May, 2012
  8. K. Yoshida, "Development of Main Circuit System using Direct Drive Motor (DDM)", JR EAST Technical Review No.1-Autumn,pp. 46-52, 2002.
  9. H. Tabuchi, T. Suzuki, T. Koseki, "A Proposal and Study on Braking Signs for Increasing Rate of Electric Brake", 2001 National Convention Record, I.E.E. Japan, Vol. 5, No. 253, pp.2092-2093, March 2001.
  10. Y. Toshiaki, S. Shigetomo "Traction Motors Aiming at High Efficiency and Low Maintenance" toshiba review Vol.58, No.9 ,PP 14 -17. 2003
  11. George Ellis, Jens Ohno Krah, Observer-based Resolver Conversion in Industrial Servo Systems., PCIM 2001, 2001.
  12. Reza Hoseinnezhad, Peter Harding A Novel Hybrid Angle Tracking Observer for Resolver to Digital Conversion."44th IEEE Conference on Decision & Control, and the European Control Conference, pp7020-7025, 2005.
  13. Texas Instruments, TMS320F240 DSP Solution for Obtaining Resolver Angular Position and Speed. Application Report SPRA605, February 2000.
  14. Analog Devices, 12-Bit R/D Converter with Reference Oscillator., Analog Devices, 2003.