DOI QR코드

DOI QR Code

Studies on Borassus fruit fiber and its composites with Polypropylene

  • Sudhakara, P. (Department of Mechanical Engineering, Changwon National University) ;
  • Obi Reddy, K. (Dept. of Mechanical Engineering Technology, Doornfontein Campus, University of Johannesburg) ;
  • Prasad, C. Venkata (Department of Mechanical Engineering, Changwon National University) ;
  • Jagadeesh, Dani. (Department of Mechanical Engineering, Changwon National University) ;
  • Kim, H.S. (Department of Mechanical Engineering, Changwon National University) ;
  • Kim, B.S. (Composites Materials Group, Korea Institute of Materials Science) ;
  • Bae, S.I. (Department of Mechanical Engineering, Changwon National University) ;
  • Song, J.I. (Department of Mechanical Engineering, Changwon National University)
  • Received : 2012.12.03
  • Accepted : 2013.02.15
  • Published : 2013.02.28

Abstract

This paper summarizes the structural characterization of borassus fruit fibers by means of various characterization techniques, optimization of alkali treatment of borassus fruit fine fibers (BFF) with a 5% concentration sodium hydroxide solution for different time intervals (1, 4, 8 and 12 h) and the changes occurring in borassus fibers. This paper also discusses the manufacturing of BFF/PP compotes using MAPP as a compatibilizer in addition to alkali treatment. Composites were evaluated for their mechanical and morphological properties. The tensile strength and modulus, flexural strength and modulus and impact strength were increased for alkali treated/MAPP composites by 4.5%, 17%, 17.2 %, 9% and 10% respectively.

Keywords

References

  1. Brasa, M.L., Duquesnea, S., Foisb, M., Griselb, M., and Poutchc, F., "Intumescent polypropylene/flax blends: a preliminary study," Polymer Degradation and Stability, Vol. 88, No. 1, 2005, pp. 80-84. https://doi.org/10.1016/j.polymdegradstab.2004.04.028
  2. Sherely, A., Abderrahim, B., Laurent, I., Yves, C., Kuruvilla, J., and Sabu, T., "Effect of fiber loading and chemical treatments on hermophysical properties of banana fiber/ polypropylene commingled composite materials," Composites: Part A, Vol. 39, No. 9, 2008, 1582-1588. https://doi.org/10.1016/j.compositesa.2008.06.004
  3. Naozumi, T., Kohei, U., Koichi, O., and Mitsuhiro, S., "Biodegradation of aliphatic polyester composites reinforced by abaca fiber," Polymer Degradation and Stability, Vol. 86, No. 3, 2004, pp. 401-409. https://doi.org/10.1016/j.polymdegradstab.2004.04.026
  4. Mutje, P., Vallejos, M.E., Girones, J., Vilaseca, F., Lopez, A., Lopez, J.P., and Me'ndez, J.A., "Effect of maleated polypropylene as coupling agent forpPolypropylene composites reinforced with hemp strands," Journal of applied Polymer Science, Vol. 102, No. 1, 2006, pp. 833-840. https://doi.org/10.1002/app.24315
  5. Yu, H.N., Kim, S.S., Hwang, I.U., and Lee, D.G., "Application of natural fiber reinforced composites to trenchless rehabilitation of underground pipes," Composite Structures, Vol. 86, No. 1-3, 2008, pp. 285-290. https://doi.org/10.1016/j.compstruct.2008.03.015
  6. Pengfei, N., Baoying, L., Xiaoming, W., Xiaojun, W., and Jie, Y., "Study on mechanical properties and thermal stability of polypropylene/hemp fiber composites," Journal of Reinforced Plastics and Composites, Vol. 30, No. 1, 2011, pp. 36-44. https://doi.org/10.1177/0731684410383067
  7. Dale, E.W., and O'Dell, J.L., "Wood-polymer composites made with acrylic monomers, isocyanate, and maleic anhydride," Journal of Applied Polymer Science, Vol. 73, No. 12, 1999, pp. 2493-2505. https://doi.org/10.1002/(SICI)1097-4628(19990919)73:12<2493::AID-APP18>3.0.CO;2-C
  8. Bledzki, A.K., Mamun, A.A., and Faruk, O., "Abaca fibre reinforced PP composites and comparison with jute and flax fibre PP composites," Express Polymer Letters, Vol. 1, No. 11, 2007, pp. 755-762. https://doi.org/10.3144/expresspolymlett.2007.104
  9. Byeon, J.M., Gi, B.N., Kim, J.W., Kim, B.S., and Song, J.I., "Surface treatment influence on the mechanical behavior of jute fiber reinforced composites," Advanced Materials Research, Vol. 410, 2012, pp. 122-125.
  10. Lee, H.S., Cho, D., and Han, S., "Effect of natural fiber surface treatments on the interfacial and mechanical properties of henequen/polypropylene biocomposites," Macromolecular Research, Vol. 16, No. 6, 2008, 411-417. https://doi.org/10.1007/BF03218538
  11. Shahzad, A., "Efects of water absorption on mechanical properties of hemp fiber composites," Polymer Composites, Vol. 33, No. 1, 2012, pp. 120-128. https://doi.org/10.1002/pc.21254
  12. Gross, R.A., and Karla, B., "Biodegradable polymers for the environment," Science, Vol. 297, 2002, pp. 1803-1807.
  13. Puglia, D., Biagiotti, J., and Kenny, L.M., "A review on natural fibre-based composites - part II: Application of natural reinforcements in composite materials for automotive industry," Journal of Natural Fibers, Vol. 1, No. 2, 2005, pp. 23-65. https://doi.org/10.1300/J395v01n03_03
  14. Bill, B., Common names of common (and Uncommon) Palms, virtual palm encyclopedia, Palm & Cycad Societies of Florida, USA, 1999.
  15. Morton, J.F., "Notes on distribution, propagation, and products of Borassus palms (arecaceae)," Economic Botany, Vol. 42, No. 3, 1988, pp. 420-441. https://doi.org/10.1007/BF02860166
  16. Obi, R.K., Guduri, B.R., and Varada, R.A., "Structural characterization and tensile properties of borassus fruit fibers," Journal of applied Polymer Science, Vol. 114, No. 1, 2009, 603-611. https://doi.org/10.1002/app.30584
  17. Obi, R.K., Uma, M.C., Shukla, M., Song, J.I., and Varada, R.A., "Tensile and structural characterization of alkali treated Borassus fruit fine fibers," Composite: Part B, Vol. 44, No. 1, 2013, PP. 433-438. https://doi.org/10.1016/j.compositesb.2012.04.075
  18. Keener, T.J., Stuart, R.K., and Brown, T.K., "Maleated coupling agents for natural fibre composites," Composites Part A, Vol. 35, No. 3, 2004, pp. 357-362.
  19. Chattopadhyay, S.K., Khandal, R.K., Ramagopal, U., and Ghoshal, A.K., "Mechanical, thermal, and morphological properties of maleic anhydride-g-polypropylene compatibilized and chemically modified banana fiber reinforced Polypropylene Composites," Journal of applied Polymer Science, Vol. 117, No. 3, 2010, pp. 1730-1741.
  20. Wang, Y.S., Koo, W.M., and Kim, H.D., "Preparation and properties of new regenerated cellulose fibers," Textile Research Journal, Vol. 73, No. 11, 2003, pp. 998-1004. https://doi.org/10.1177/004051750307301110
  21. Gassan, J., and Bledzki, A.K., "The influence of fiber-surface treatment on the mechanical properties of jute-polypropylene composites," Composites Part A, Vol. 28, No. 12, 1997, pp. 1001-1005. https://doi.org/10.1016/S1359-835X(97)00042-0
  22. Sudhakara, P., Kamala Devi, A.P., Prasad, C.V., Obi, R.K., Woo, L.D., Kim, B.S., and Song, J.I., "Thermal, mechanical, and morphological properties of maleated polypropylene compatibilized borassus fruit fiber/Polypropylene composites," Journal of Applied Polymer Science, Vol. 128, No. 2, 976- 982.
  23. Hujuri, U., Chattopadhyay, S.K., Ghoshal, A., and Uppaluri, R., "Effect of maleic anhydride grafted polypropylene on the mechanical and morphological properties of chemically modified short-pineapple-leaf-fiber-reinforced polypropylene composites," Journal of applied Polymer Science, Vol. 107, No. 3, 2008, pp. 1507-1516. https://doi.org/10.1002/app.27156
  24. Chattopadhyay, S.K., Khandal, R.K., Ghoshal, A., and Uppaluri R., "Influence of varying fiber lengths on mechanical, thermal, and morphological properties of MA-g-PP compatibilized and chemically modified short pineapple leaf fiber reinforced polypropylene composites," Journal of applied Polymer Science, Vol. 113, No. 6, 2009, pp. 3750-3756. https://doi.org/10.1002/app.30252

Cited by

  1. Borassus and Tamarind Fruit Fibers as Reinforcement in Cashew Nut Shell Liquid-Epoxy Composites vol.15, pp.2, 2018, https://doi.org/10.1080/15440478.2017.1323697
  2. Manufacturing and Characterization of Long Palmyra Palm/Borassus Flabellifer Petiole Fibre Reinforced Polyester Composites vol.14, 2014, https://doi.org/10.1016/j.protcy.2014.08.033
  3. Effect of Chemical Surface Modifications on the Properties of Alfa Fiber-Polyester Composites vol.53, pp.4, 2014, https://doi.org/10.1080/03602559.2013.844828
  4. Removal of vanadium from wastewater using surface-modified lignocellulosic material vol.25, pp.26, 2018, https://doi.org/10.1007/s11356-018-2675-x
  5. Borassus powder-reinforced poly(lactic acid) composites with improved crystallization and mechanical properties vol.136, pp.18, 2019, https://doi.org/10.1002/app.47440
  6. Influence of chemical treatment on the physico-mechanical characteristics of Tamarind and Borassus fruit fibres-a comparative assessment vol.6, pp.12, 2013, https://doi.org/10.1088/2053-1591/ab569c
  7. Synthesis of Borassus flabellifer fruit husk activated carbon filter for phenol removal from wastewater vol.17, pp.2, 2013, https://doi.org/10.1007/s13762-019-02325-3
  8. A review on the mechanical properties of bio waste particulate reinforced polymer composites vol.37, pp.p2, 2013, https://doi.org/10.1016/j.matpr.2020.07.360
  9. A novel palm sheath and sugarcane bagasse fiber based hybrid composites for automotive applications: An experimental approach vol.42, pp.1, 2013, https://doi.org/10.1002/pc.25843
  10. Influence of Alkali Treatment and Maleated Polypropylene (MAPP) Compatibilizer on the Dry-Sliding Wear and Frictional Behavior of Borassus Fruit Fine Fiber (BFF)/Polypropylene (PP) Polymer Composites vol.2021, pp.None, 2021, https://doi.org/10.1155/2021/5822245