Abstract
This paper presents the results of a numerical study on the effects of a side guide on the top and tail camber. The temperature distribution on the surface of an actual hot-rolled bar was measured using a thermal imager. The measured temperatures were incorporated with finite element analysis, and the thermomechanical behavior of the hot bar was examined. The installation location of the side guide, length of the side guide, and gap between the bar and the insides of the side guide were selected as the parameters to be investigated. The results show that it is more effective to install the side guide at the position where the magnitude of the camber is larger. It is noted that a longer side guide is more effective than a shorter one in reducing the camber. It is also found that the camber decreases in proportion with the guiding gap.
본 논문에서는 열간 조압연에서 사용되는 사이드 가이드가 소재의 선 후단부 캠버에 미치는 영향에 대해서 고찰한다. 먼저 실제 열간 압연된 소재의 표면 온도 분포를 열화상 카메라로 측정한다. 이 온도 측정 결과를 유한요소해석에 반영하여 열간 소재의 비대칭 열변형 거동을 고찰한다. 사이드 가이드에 관련된 변수로써 사이드 가이드의 설치 위치, 사이드 가이드의 길이, 사이드 가이드와 소재 사이의 측면 갭을 선택하였다. 캠버의 크기가 더 큰 쪽에 사이드 가이드를 설치하는 것이 더 효과적이라는 정량적인 결과를 도출하였다. 사이드 가이드가 길면 길수록 캠버를 줄이는데 더 효과적이며, 사이드 가이드와 소재 사이의 갭을 줄이면 줄일수록 캠버의 크기를 비례적으로 줄일 수 있다는 결과도 정량적으로 입증하였다.