대한건축학회논문집:계획계 (Journal of the Architectural Institute of Korea Planning & Design)

대한건축학회 (Architectural Institute of Korea)
권호 표지
DOI QR코드

DOI QR Code

Free Form 건축 곡면형상의 구축유형 분류 및 특성에 관한 연구

A Study on the Classification and its Features of Fabrication Types in Realizing Double-curved Surface of Free Form Architecture

  • 투고 : 2011.06.02
  • 발행 : 2013.12.25
⟨ 이전 논문 다음 논문 ⟩

초록

This paper focuses on various methods of fabricating a curved surface of free form architecture and introduces a new approach of classifying the types of the fabrications and utilizing the features of those types. Double curved surface fabrications are classified under 3 categories; dividing type, developing type and pattern type. The matrix of two categories is then, applied to case studies to show clearly the effect and the result of utilizing each fabrication category combination in real building construction, which helps designers find out relevant construction method for the curved surface created. The features of fabrication types are analyzed in this paper regarding model surface by computational programs in order to reveal the factors such as reasonable cost, aesthetic quality and surface continuity. This result will help designers understand better their free form design and its fabrication as well as re-interpret and optimize them.

키워드

과제정보

연구 과제 주관 기관 : 한국연구재단

참고문헌

  1. Chi-Wing Fu 외 3명, K-set Tilable Surface, ACM Trans, vol.29, Issue 4, 2010
  2. Helmut Pottman, Geometry and New and Future Spatial Patterns, Architectural Design, vol79, 6, 2009
  3. Michael Eigensatz 외 6명, Paneling Architectural Freeform Surfaces, ACM SIGGRAPH, 2010
  4. A. Schiftner 외 3명, Packing circles and spheres on surfaces, ACM Trans. Graph. 28, 5, Article 139, 2009
  5. Branko Kolarevic, Digital Production, Architecture in the Digital Age, Spon Press, 2003
  6. Tuba Kocaturk, Interdisciplinary Knowledge Modeling for Free-Form Design, TU Delft, Computer Aided Architectural Design Futures, 2005
  7. M. Veltkamp, Free Form Structural Design : Schemes, Systems & Prototypes of Structures for Irregular Shaped Buildings (Research in Architectural Engineering Series), IOS Press, 2007
  8. Helmut Pottmann 외 6명, Freeform surfaces from single curved panels, ACM Trans. Graph. 27, 3, Article 76, 2008
  9. Helmut Pottmann, Architectural Geometry as Design Knowledge, Special Issue on Architectural Structural Engineering, vol.80, Issue 4, p.p.72-77, 2010
  10. Helmut Pottmann 외 4명, Architectural Geometry, Bentley Institute Press, 2007
  11. Mayank Singh, Scott Schaefer, Triangle Surfaces with Discrete Equivalence Classes,
  12. Yang Liu 외 4명, Geometric Modeling with Conical Meshes and Developable Surfaces,
  13. 박흥식,전한종, 평면사변형 메쉬기법을 활용한 비정형 건축의 형태 생성 방법에 관한 연구, 한국문화공간건축학회논문집, 통권 제26호, 2009
  14. 김선우, 패널 제작방법에 따른 비정형 건축물 패널의 분류와 최적화 방법, 연세대학교 학위논문(석사), 2009
  15. 이효진, 김동현, 조성용, 디지털 기술 도입에 따른 건축표피의 구축적 의미에 대한 연구, 대한건축학회논문집, v.26 n.11, 2010
  16. 류창수, 곡면형상과 Glass Skin 구축에 관한 연구, 대한건축학회논문집, v.23 n.1, 2007
  17. 박정대, 곡면형상의 구축을 위한 디지털 기술과 건축 디자인 프로세스, 서울대학교 학위논문(박사), 2005
  18. 문성우, 패라메트릭 기술을 이용한 건축 디자인 체계화에 관한 연구, 아주대학교 학위논문(석사), 2010
  19. 이강, 비정형 건축의 시공 문제점들, 대한건축학회지 v.52 n.4, 2008
  20. 대한건설정보, 개정 표준품셈 노임단가 적용 건설공사 일위대가, 대한건설정보, 2012