DOI QR코드

DOI QR Code

X-ray Computed Tomography on Larger Diameter Timber than Digital Detector

  • Kim, Chul-Ki (Department of Forest Sciences, Seoul National University) ;
  • Lee, Jun-Jae (Department of Forest Sciences/Research Institute for Agriculture and Life Sciences, Seoul National University) ;
  • Oh, Jung-Kwon (Department of Forest Sciences/Research Institute for Agriculture and Life Sciences, Seoul National University)
  • 투고 : 2013.03.05
  • 심사 : 2013.09.24
  • 발행 : 2013.09.25

초록

X-ray computed tomography is a very powerful nondestructive technique in safety inspection of historic timber building. But, in field, various testing condition makes it difficult to carry out X-ray CT testing. Limited size in X-ray digital detector is one of the problems. In this study, a pitch pine disk with two holes was used to know how imperfection in X-ray projection affects CT image resolution. Using various number of projections, CT image was reconstructed by filtered back projection method, and then it was investigated how many projection is required to identify the holes in different location. Two artificial holes could be differently detected according to their location in cross section of specimen. One hole in center part of specimen was identified using more than 9 radiographs, but the other one which located in outer part of cross section could not be detected until more than 36 projections were used. Even though there is data missing in outer part of cross section due to limited size of detector, the center part of CT image could be reconstructed well and the resolution of outer part became higher with increase of the number of projections. For field application, the number of projections for CT image reconstruction needs to be decided with consideration of another nondestructive testing and the location of interest.

키워드

참고문헌

  1. Dyer, S. A. 2001. Wiley survey of Instrumentation and Measurement. John Wiley & Sons. ISBN 0-471-39484-X.
  2. Schajer, G. S. 2001. Lumber strength grading using X-ray scanning. Forest products journal 51(1).
  3. Oh, J. K., K.-M. Kim, and J.-J. Lee. 2010. Use of Adjacent Knot Data in Predicting Bending Strength of Dimension Lumber by X-ray. Wood and fiber science 42(1): 10-20.
  4. Oh, J. K., K.-B. Shim, H. Yeo, and J.-J. Lee. 2010. Development of a Method to Predict the Bending Strength of Lumber Without Regard to Species Using X-ray Images. Wood and fiber science 42(1): 21-29.
  5. Oh, J. K., K.-b. Shim, K.-M. Kim, and J.-J. Lee. 2009. Quantification of knots in dimension lumber using a single-pass X-ray radiation. Journal of wood science 55(4): 264-272. https://doi.org/10.1007/s10086-009-1031-7
  6. Oh, J. K., K.-M. Kim, and J.-J. Lee. 2008. Development of Knot Quantification Method to Predict Bending Strength Using X-ray Scanner, Journal of the Korean Wood Science and Technology 36(5): 33-41. https://doi.org/10.5658/WOOD.2008.36.5.033
  7. Lee, S. J., K. M. Kim, and J. J. Lee. 2006. Application of the X-ray CT technique for NDE of wood in field, Key Engineering Materials 321-323: 1172-1176. https://doi.org/10.4028/www.scientific.net/KEM.321-323.1172
  8. Kim, K. M., S. J. Lee, and J. J. Lee. 2006. Development of portable X-ray CT system 1 - evaluation of wood density using X-ray radiography -. Journal of the Korean Wood Science and Technology 34(1): 15-22.
  9. Kim, K. M., S. J. Lee, and J. J. Lee. 2006. Development of portable X-ray CT system 2 - CT Image reconstruction of wood using density distribution -. Journal of the Korean Wood Science and Technology 34(1): 23-31.
  10. Kim, C. K., S. J. Lee, K. M. Kim, and J. J. Lee. 2011. Visualization of internal state of wood with X-ray CT reconstruction technique throughout reduced number of X-ray radiography, Proceeding of the 17th international NDT&E on wood. Hungary, 2011.9.14-16.