Abstract
KOMPSAT-5(KOrea Multi-Purpose SATellite-5) has a benefit of continuously conducting its mission in all weather and even night by loading SAR(Synthetic Aperture Radar) payload, which is different from optical sensor of KOMPSAT-2 satellite. During IOT(In-Orbit Test) periods, SAR image calibration should be conducted through ground target of which location and RCS is pre-determined. Differently from the conventional corner reflector, active transponder has a capability to change its internal transfer gain and delay, which allows active transponder to be shown in a pixel of SAR image with very high radiance and virtual location. In this paper, the development of active transponder is presented from design to I&T(Integration and Test).
다목적실용위성 5호는 영상 레이더(SAR: Synthetic Aperture Radar)을 탑재하여 야간이나 구름이 있는 지역에 대해서도 지속적인 영상촬영이 가능하다. 발사 후 초기 운영 시험에서는 SAR 탑재체에 의해 관측된 영상에 대한 기하 및 복사 보정을 수행한다. 이러한 보정은 지표상의 위치 및 RCS(Radar Cross Section)을 알고 있는 보정장치에서 반사된 SAR 신호에 의해 나타난 영상 픽셀에서의 위치 및 값을 이용하여 처리된다. 이러한 보정을 위해 기존 반사기와 달리 능동 트랜스폰더는 RCS 값을 변경할 수 있으며, 내부 시간 지연 기능에 의해 가상의 위치로 이동하는 효과를 영상에서 나타낼 수 있다. 본 논문에서는 능동 트랜스폰더의 개발에 필요한 요구사항을 도출하여 이로부터 설계, 조립 및 시험결과를 정리하였다.