한국자동차공학회논문집 (Transactions of the Korean Society of Automotive Engineers)

  • 제20권6호
  • /
  • Pages.140-145
  • /
  • 2012
  • /
  • 1225-6382(pISSN)
  • /
  • 2234-0149(eISSN)
한국자동차공학회 (The Korean Society of Automotive Engineers)
권호 표지
DOI QR코드

DOI QR Code

LP-EGR이 적용된 디젤 엔진 인터쿨러용 알루미늄 튜브의 내식성 향상

Corrosion Characteristics Improvement of Aluminium Tube for Diesel Engine Intercooler with LP-EGR(Low Pressure-Exhaust Gas Recirculation)

  • 안준 (현대자동차 금속재료연구팀) ;
  • 하석 (현대자동차 금속재료연구팀) ;
  • 곽동호 (현대자동차 금속재료연구팀) ;
  • 정병준 (현대자동차 금속재료연구팀)
  • Ahn, Joon (Metallic Materials Research Team, Hyundai-motor Company) ;
  • Ha, Seok (Metallic Materials Research Team, Hyundai-motor Company) ;
  • Kwak, Dong-Ho (Metallic Materials Research Team, Hyundai-motor Company) ;
  • Jung, Byung-Jun (Metallic Materials Research Team, Hyundai-motor Company)
  • 투고 : 2012.03.21
  • 심사 : 2012.05.16
  • 발행 : 2012.11.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Recently, various after-treatment systems, such as LP-EGR(Low Pressure-Exhaust Gas Recirculation), SCR(Selective Catalytic Reduction) and LNT(Lean NOx Trap), were developed to obey the stringent emission regulations of diesel engine. There are many researches on LP-EGR system because it has advantages of NOx reduction and low fuel consumption. But, condensation water is generated in internal of intercooler tube and it contains various types of anion that cause the corrosion of aluminium tube. In this study, it is examined that the condensation water effects on corrosion of aluminium tube. And method for improvement of corrosion characteristics is investigated using the dipping and electrochemical test.

키워드

참고문헌

  1. European Parliament, Council, Regulation (EC) No.715/2007 of the European Parliament and of the Council of 20 June 2007 on Type Approval of Motor Vehicles with Respect to Emissions from Light Passenger and Commercial Vehicles (Euro 5 and Euro 6) and on a Access to Vehicle Repair and Maintenances Information, OJ L 171, pp.1-16, 2007.
  2. Y. R. Kim and S. H. Cho, "New Technologies for the Super Clean Passenger Car Diesel Engines," Auto Journal, KSAE, Vol.35, No.5, pp.16-24, 2009.
  3. J. Shutty, "Control Strategy Optimization fo Hybrid EGR Engines," SAE 2009-01-1451, 2009.
  4. K. H. Nam, J. Yu and S. H. Cho, "Improvement of Fuel Economy and Transient Control in a Passenger Diesel Engine Using LP(Low Pressure)-EGR," SAE 2011-01-0400, 2011.
  5. H. W. Lee, C. H. Jo, K. H. Nam, S. Y. Lee and E. H. Lee, "Optimization of Low Pressure EGR of V6 3.0l Diesel Engine for $CO_{2}$ Reduction," Annual Conference Proceedings, KSAE, pp.166- 173, 2011.
  6. S. H. Lee, J. Y. Lee, J. W. Lee and K. D. Min, "Experimental Reserches on the Size Distribution and the Number of PM Emission according to EGR Types in a HSDI Engine," Annual Conference Proceedings, KSAE, pp.180-183, 2011.
  7. J. W. Chung, J. H. Kang and H. G. Lee, "A Study on the Turbocharger Operating Cahracteristics of a Diesel Engine according to EGR Loop Types," Transactions of KSAE, Vol.17, No.6, pp.89-98, 2009.
  8. C. Cuevas, D. Makaire and P. Ngendakumana, "Thermo-hydraulic Characterization of an Automotive Intercooler for a Low Pressure EGR Application," Applied Thermal Engineering, Vol.31, Issues 14-15, pp.2474-2484, 2011. https://doi.org/10.1016/j.applthermaleng.2011.04.013
  9. S. Moroz, G. Bourgoin, J. M. Lujan and B. Pla, "Acidic Condensation in Low Pressure EGR Systems Using Diesel and Biodiesel Fuels," SAE Int. J. Fuels and Lubricants, Vol.2, No.2, pp.305-312, 2010.
  10. K. Sugimoto, Y. Sawada and S. Morioka, "Effects of Alloying Elements on the Pitting Corrosion of Aluminium," Transactions of JIM, Vol.13, pp.345-351, 1972. https://doi.org/10.2320/matertrans1960.13.345
  11. V. S. Sinyavskii, V. V. Ulanova and V. D. Kalinin, "On the Mechanism of Intergranular Corrosion of Aluminium Alloys," Protection of Metals, Vol.40, No.5, pp.481-490, 2004. https://doi.org/10.1023/B:PROM.0000043067.38199.95