한국소음진동공학회논문집 (Transactions of the Korean Society for Noise and Vibration Engineering)

  • 제22권10호
  • /
  • Pages.959-967
  • /
  • 2012
  • /
  • 1598-2785(pISSN)
  • /
  • 2287-5476(eISSN)
한국소음진동공학회 (The Korean Society for Noise and Vibration Engineering)
권호 표지
DOI QR코드

DOI QR Code

전자석 바이어스 Diskless반경방향-축방향 일체형 자기 베어링 해석

Analysis of an Electromagnet Biased Diskless Integrated Radial and Axial Magnetic Bearing

  • Na, Uhn-Joo (Kyungnam University, Dept. of Mechanical Engineering)
  • 투고 : 2012.07.12
  • 심사 : 2012.09.19
  • 발행 : 2012.10.20
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The theory for a new electromagnetically biased diskless combined radial and axial magnetic bearing is developed. A typical magnetic bearing system is composed of two radial magnetic bearings and an axial magnetic bearing. The axial magnetic bearing with a large axial disk usually limits rotor dynamic performance and makes assembling and disassembling difficult for maintenance work. This paper proposes a novel electromagnet biased integrated radial-axial magnetic bearing without axial disk. This integrated magnetic bearing uses two axial coils to provide the bias flux to the radial and axial air gaps of the combined bearing. The axial magnetic bearing unit in this combined magnetic bearing utilizes reluctance forces developed in the non-uniform air gaps such that the axial disk can be removed from the bearing unit. The 4-pole homopolar type radial magnetic bearing unit is also designed and analyzed. Three dimensional finite element model for the bearing is also developed and analyzed to illustrate the diskless combined magnetic bearing.

키워드

참고문헌

  1. Chang, I.-B. and Han, D.-C., 1995, Performance Study of Magnetic Bearing considering the Performance Limit, Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 5, No. 1, pp. 59-65.
  2. Kim, S. J. and Okada, Y., 2002, 4-pole Lorentz Force Type Self-bearing Motor with a New Winding Confuguration, Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 12, No. 1, pp. 73-81. https://doi.org/10.5050/KSNVN.2002.12.1.073
  3. Sortore, C. K., Allaire, P. E., Maslen, E. H., Humphris, R. R. and Studer, P. A., 1990, Permanent Magnet Biased Magnetic Bearings-design, Construction and Testing, Proceedings of the Second International Symposium on Magnetic Bearings, pp. 175-182.
  4. Maslen, E. H., Allaire, P. E., Noh, M. D. and Sortore, C. K., 1996, Magnetic Bearing Design for Reduced Power Consumption, ASME Journal of Tribology, Vol. 118, No. 4, pp. 839-846. https://doi.org/10.1115/1.2831617
  5. Lee, A. C., Hsiao, F. Z. and Ko, D., 1994, Analysis and Testing of a Magnetic Bearing with Permanent Magnets for Bias, JSME International Journal, Series C, Vol. 37, pp. 774-782.
  6. McMullen, P. T., Huynh, C. S. and Hayes, R. J. 2000, Combination Radial-axial Magnetic Bearing, Proceedings of the Seventh International Symposium on Magnetic Bearings, pp. 473-478.
  7. Kim, H. Y. and Lee, C. W., 2006, Design and Control of Active Magnetic Bearing System with Lorentz Force-type Axial Actuator, Mechatronics, Vol. 16, pp. 13-20. https://doi.org/10.1016/j.mechatronics.2005.09.005
  8. Hijikata, K., Kobayashi, S., Takemoto, M., Tanaka, Y., Chiba, A. and Fukao, T, 2008, Basic Characteristics of an Active Thrust Magnetic Bearing with a Cylindrical Rotor Core, IEEE Transactions on Magnetics, Vol. 44, No. 11, pp. 4167-4170. https://doi.org/10.1109/TMAG.2008.2002628
  9. Hijikata, K., Takemoto, M., Ogasawara, S., Chiba, A., 2009, Behavior of a Novel Thrust Magnetic Bearing with a Cylindrical Rotor on High Speed Rotation, IEEE Trnasactions on Magnetics, Vol. 45, No. 10, pp. 4617-4620. https://doi.org/10.1109/TMAG.2009.2022178
  10. Na, U. J, 2012, Design and Analysis of a New Permanent Magnet Biased Integrated Radial-axial Magnetic Bearing, International Journal of Precision Engineering and Manufacturing, Vol. 13, No. 1, pp. 133-136. https://doi.org/10.1007/s12541-012-0018-2
  11. Roters, H. C., 1941, Electromagnetic Devices, Wiley, New York.