• Proceedings of the KIEE Conference
• /
• 2006.07b
• /
• pp.879-880
• /
• 2006

횡자속의 기본원리는 릴럭턴스 전동기와 같다. 발생한 힘밀도는 공극과 극간격에 반비례하고 기자력의 자성에 비례한다. 이러한 횡자속 선형전동기를 적용할 경우 추력의 변화로 인해서 진동과 힘의 불평형이 발생하는 것이 일반적이다. 본 논문에서는 이러한 추력 불평형과 진동특성을 향상시킬 수 있는 방법이 다상형으로 구동하는 방법이 있으며 힘을 균일하게 할 수 있고 전동기의 체적을 줄이고 진동특성을 저감시킬 수 있다는 것이라고 판단된다.

• Proceedings of the KIEE Conference
• /
• 2008.04c
• /
• pp.77-79
• /
• 2008

This paper deals with extraction of design parameters of Linear Switched Reluctance Motor (LSRM) based on force calculation using space harmonic analysis, 2D Finite Element Method (FEM) and experimental measurement. First, analytical solutions for flux density due to mover winding currents are derived in terms of magnetic vector potential and a 2D rectangular coordinate system, for the case when the mover is located at aligned and unaligned position. The analytical results are compared with those obtained from a 2D FEM Second, using Fourier series expansion, this paper predicts the force profile of LSRM analytically.

• Proceedings of the KIEE Conference
• /
• 2007.10c
• /
• pp.107-109
• /
• 2007

This paper presents a dynamic force analysis of switched reluctance motor using 2D-transient finite element method. The main exciting of the vibration is the electiromagnetic force in the stator that is calculated Maxwell stress method. The advantage for elimation of vibration of 12/8 SRM was explained by comparing the radial force of 12/8 and 6/4 SRM in both time and frequency domain. In order to effective mitigate the vibration during turning off process, effects of different commutation method were investigated.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.651-652
• /
• 2008

This research presents a multi-objective optimal design employing topological approach to maximize magnetic energy while minimizing structural deformation which is caused by magnetic reluctance force and magnetostriction. A design sensitivity formula is derived by employing the adjoint variable method (AVM) to avoid numerous sensitivity evaluations for a coupled magneto-mechanical analysis. The sensitivity analysis is verified using the finite difference method (FDM) in a C-shape actuator. A linear actuator used in a home appliance is examined for optimal design and demonstrates the strength of the proposed topology optimization approach.

• Proceedings of the KIEE Conference
• /
• 2009.04b
• /
• pp.58-60
• /
• 2009

This paper deals with force characteristic analysis of linear switched reluctance motor using dynamic simulation. First, we calculated flux density of linear switched reluctance motor according to position. Second, analyzed normal force from flux density of linear switched reluctance motor according to position. Also, analysis result compares with data that is derived through a finite element analysis, and proved validity. However, linear switched reluctance motor has non linear characteristic, hence, analysis of propulsion force do not easy using analytical method. Therefore, we presented dynamic characteristic analysis model which is consisted at motor and sensor signal part, etc., and substitute circuit constant that get using magnetic equivalent circuit method, we confirmed propulsion force.

• Proceedings of the KIEE Conference
• /
• 2001.10a
• /
• pp.122-124
• /
• 2001

In this paper, the influence of electrical parameters such as the turn-on and turn-off angle on the torque and force characteristics is investigated for the reduction of the torque ripple which is main source of vibration and noise in switched reluctance motor (SRM). The four different types of the turn-on angle are set to the section of rising inductance profile respectively. The optimum turn-on angle is proposed for the acquisition of the flat current shape minimizing the torque ripple. 2D finite element method (FEM) considering the iron saturation and the actual switching circuit of the SRM drive is applied for the dynamic analysis. The simulation results of phase current and torque are also compared to the experimental results.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.22 no.10
• /
• pp.959-967
• /
• 2012

The theory for a new electromagnetically biased diskless combined radial and axial magnetic bearing is developed. A typical magnetic bearing system is composed of two radial magnetic bearings and an axial magnetic bearing. The axial magnetic bearing with a large axial disk usually limits rotor dynamic performance and makes assembling and disassembling difficult for maintenance work. This paper proposes a novel electromagnet biased integrated radial-axial magnetic bearing without axial disk. This integrated magnetic bearing uses two axial coils to provide the bias flux to the radial and axial air gaps of the combined bearing. The axial magnetic bearing unit in this combined magnetic bearing utilizes reluctance forces developed in the non-uniform air gaps such that the axial disk can be removed from the bearing unit. The 4-pole homopolar type radial magnetic bearing unit is also designed and analyzed. Three dimensional finite element model for the bearing is also developed and analyzed to illustrate the diskless combined magnetic bearing.