대한조선학회논문집 (Journal of the Society of Naval Architects of Korea)

  • 제49권5호
  • /
  • Pages.410-415
  • /
  • 2012
  • /
  • 1225-1143(pISSN)
  • /
  • 2287-7355(eISSN)
대한조선학회 (The Society of Naval Architects of Korea)
권호 표지
DOI QR코드

DOI QR Code

몰수형 피치댐핑포일 주위 유동의 PIV 해석

PIV Analysis of Flow around a Submerged Pitch Damping Foil

  • 김옥석 (서해지방해양경찰청 경비안전과) ;
  • 이경우 (목포해양대학교 조선해양공학과)
  • Gim, Ok-Sok (Dept. of Guard and Safety, West Regional Headquaters, Korea Coast Guard) ;
  • Lee, Gyoung-Woo (Dept. of Naval Architecture & Ocean Engineering, Mokpo National Maritime University)
  • 투고 : 2012.03.10
  • 심사 : 2012.09.17
  • 발행 : 2012.10.20
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

An experimental study is carried out to investigate the near-wake characteristics of a NACA 0018 foil with a flat plate. Two-frame grey-level cross correlation PIV method is used to measure the local flow characteristic around a pitch damping foil to control the vertical motion of high speed crafts in a circulating water channel. The analysis also includes angles of attack 10 and 20 degrees respectively. Reynolds number $Re{\fallingdotseq}3.5{\times}10^4$ based on the chord length(C=100mm) of NACA0018 has been applied during the whole experiments. The distance between the foil and the flat plate is D/C=0.5, 1.0 and 1.5 respectively. The channel effect according as the distance between the foil and the flat plate has a close relation with the velocity distributions around the foil. In the wake of 20-degree of attack, the complex turbulent flow and a thick boundary layer are formed due to the processes of vortex generation and dissipation.

키워드

참고문헌

  1. Anthony, F.M., 2008. The Marine Engineering Reference Book. Butterworth-Heinemann
  2. Arribas, F.P. & Fernandez, J.A., 2006. Strip theories applied to the vertical motions of high speed crafts. Ocean Engineering, 33, pp.1214-1229. https://doi.org/10.1016/j.oceaneng.2005.04.021
  3. Cho, D.H. & Lee, Y.H., 2001. Application of PIV to Fluid Machinery and Assessment of Ventilation Performance in Ships. Journal of Korean Society of Marine Engineering, 25(3), pp.540-551.
  4. Gim, O.S. Lee, G.W. Lee, C.W. & Oh, W.J., 2011. PIV Measurement of Flow around a surmerrged Pitch Damping Foil. Proceeding of the Annual Autumn Meeting, SNAK. pp.573-578.
  5. Kim, D.J. Rhee, K.P. Hwang, S.H. & Park, H.S., 2009. An Experimental Study on the Motion Response of a High-Speed Planing Craft in Regular Head Waves. Journal of the Society of Naval Architects of Korea, 46(4), pp.373-381. https://doi.org/10.3744/SNAK.2009.46.4.373
  6. Kim, D.J. Rhee, K.P. You, Y.J. & Park, H.S., 2010. An Experimental Study on the Vertical Motion of a High-Speed Planing Craft in Regular Following Waves. Journal of the Society of Naval Architects of Korea, 47(4), pp.496-507. https://doi.org/10.3744/SNAK.2010.47.4.496
  7. Odd, M.F., 2005. Hydrodynamics of High-Speed Marine Vehicles. Cambridge University Press. pp.210-211.
  8. Roshko, A., 1993. Perspective on bluff body aerodynamics. Journal of Wind Engineering and Industrial Aerodynamics, 49(1-3), pp.79-100. https://doi.org/10.1016/0167-6105(93)90007-B
  9. Seo, D.W. Kim, J.H. Kim, H.C. & Lee, S.H., 2008. Influence of Jet Nozzle Arrangement on the Performance of a Coanda Foil. Journal of the Society of Naval Architects of Korea, 45(6), pp.569-578. https://doi.org/10.3744/SNAK.2008.45.6.569