• 제어로봇시스템학회논문지
• /
• 제19권12호
• /
• pp.1111-1118
• /
• 2013

In this paper, the disturbance applied to launcher hatch by ship motions is introduced to identify the vertical ship motion disturbance. Basically, ship motions are comprised of 6 degrees of freedom: roll, pitch, yaw, heave, surge and sway. In the case of the shipboard launcher hatch the coupled pitch, heave and roll are significant motions to be transformed to a vertical direction motion. The maximum acceleration values are obtained from the vertical motion model and the ship motion data in accordance with ship type and hatch location on the ship. We verify that the maximum pitch motion mainly influences the launcher hatch and also present the quantity of the maximum load disturbance by the ship's motion acceleration.

• 한국산학기술학회논문지
• /
• 제9권4호
• /
• pp.905-910
• /
• 2008

본 논문은 운동 물체에 대한 시뮬레이션 할 수 있는 원판형 모션테이블 제작과 제어 실험 시스템을 제시하였다. 원판형 모션테이블은 3개의 길이가 변하는 축과 중심점을 유지하는 축으로 이루어져 있으며, 원판의 자세 변화에 따른 중심점은 중심축 상에 항상 놓이도록 설계 되어 있다. 제어 시스템은 원판형 모션테이블의 서보모터 3개를 제어함으로써 원판의 자세를 바꿀 수 있도록 설계 되었다. 또한 본 원판형 모션테이블을 이용한 비행제어 시물레이션을 예로 제시하였다. 이러한 소형 모션테이블의 보급과 이를 이용한 실험 교육은 우리나라의 항공우주, 로봇분야의 인력양성에 기여할 것이다.

• 로봇학회논문지
• /
• 제12권1호
• /
• pp.78-85
• /
• 2017

This paper presents the development of a 3D printer based piezo-driven vertical micro-positioning stage. The stage consists of two flexure bridge structures which amplify and transfer the horizontal motion of the piezo-element into vertical motion of the end-effector. The stage is fabricated with ABS material using a precision 3D printer. This enables a one-body design eliminating the need for assembly, and significantly increases the freedom in design while shortening fabrication time. The design of the stage was optimized using response surface analysis method. Experimental results are presented which demonstrate 100nm stepping in the vertical out-of-plane direction. The results demonstrate the future possibilities of applying 3D printers and ABS material in fabricating linear driven motion stages.

• 한국공작기계학회논문집
• /
• 제15권3호
• /
• pp.91-96
• /
• 2006

The aim of this paper is to clarify the structural compliance of the constrained spatial flexible manipulator and to develop the force control by using the compliance of the links. Using the dependency of elastic deflections of links on contact force, vibrations for constrained vertical motion have been suppressed successfully by controlling the position of end-effector. However, for constrained horizontal motion, the vibrations cannot be suppressed by only controlling position of end-effector. We present the experimental results for constrained vertical motion, and constrained horizontal motion. Finally, a comparison between these results is presented to show the validity of link compliance.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1997년도 전력전자학술대회 논문집
• /
• pp.336-340
• /
• 1997

This paper is a study about motor technic of motion and feedforward control in order to shape cutting control on the machine tool. The shape error caused by delay of the servo system in the direction of radius at the time of circular cutting is reduced by feedforward control, shape error generated by the position command delay is minimized by using the acceleration/deceleration time constant after the interpolation. The study was verified to optimization of motion control on experiments of a vertical machining center of the machine tool.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 I
• /
• pp.235-240
• /
• 2001

A four degrees of freedom (dof) motion platform for bicycle simulator is developed. The motion platform, capable of the vertical linear and three angular motions, is designed based on analysis of the typical motion characteristics revealed by the existing six dof bicycle simulator. The platform essentially consists of two parts： the three dof parallel manipulator, consisting of a moving platform, a fixed base and three actuators, and the turntable to generate the yaw motion. The nonlinear kinematics and dynamics of the three dof parallel manipulator with multiple closed loop chains are analyzed for tracking control of the motion platform. The tracking performances of the three control schemes are experimentally compared： the computed torque method (CTM), the sliding mode control (SMC) and the PD control. The CTM and SMC, incorporated with the system dynamics model, are found to be equally better in performance than the PD controller, irrespective of the presence of external disturbance.

• 로봇학회논문지
• /
• 제15권2호
• /
• pp.139-146
• /
• 2020

In this paper, the slope of the footplate is adjusted to compensate for the centrifugal force with a series elastic actuator (SEA) attached to the Segway's body to improve the cornering characteristics during turning. To ensure Segway's driving safety in the curvature motion, it is necessary to compensate for the centripetal force by tilting the footplate to generate inward force from gravity. When the footplate is tilted under the control of SEA, the vertical load on both wheels has been changed accordingly. The frictional force of the wheel has been changed by the change of the vertical force, which requires adjustment of driving torque to keep the curvature trajectory. That is, the driving torque has been controlled to keep the curvature trajectory considering the frictional force caused by the turning motion. Four SEAs are attached to the footplate to control the slope of the footplate and the real curvature motion has been demonstrated to verify the effects of SEAs in the high- speed curvature motion.

• 한국해양공학회지
• /
• 제28권2호
• /
• pp.119-125
• /
• 2014

A vertical planar motion mechanism(VPMM) test was used to increase the prediction accuracy for the maneuverability of an underwater glider model. To improve the accuracy of the linear hydrodynamic coefficients, the analysis techniques of a pure heave test and pure pitch test were developed and confirmed. In this study, the added mass and damping coefficient were measured using a VPMM test. The VPMM equipment provided pure heaving and pitching motions to the underwater glider model and acquired the forces and moments using load cells. As a result, the hydrodynamic coefficients of the underwater glider could be acquired after a Fourier analysis of the forces and moments. Finally, a motion control simulation was performed for the glider control system, and the results are presented.

• 한국운동역학회지
• /
• 제19권1호
• /
• pp.27-36
• /
• 2009

본 연구에서는 수직점프시 몸통운동의 제약이 수직점프의 수행에 미치는 영향을 알아보기 위해 10명의 성인 남성을 대상으로 몸통을 자유롭게 사용한 일반적인 형태와 몸통동작을 제한한 형태의 수직점프를 비교, 분석하였다. 분석 결과 몸통동작을 제한한 경우 비 제약점프에 비해 10% 정도의 수행 손실이 있었는데, 이는 이지 순간의 중심 높이보다는 이 지속도의 차이에 의해 발생하였다. 몸통의 운동은 엉덩관절의 모멘트 파워를 증가시켜 추진의 초기 시점부터 지면반력의 증가에 기여하였는데 이러한 요인이 수행력 증가의 주요한 요인으로 작용하였다. 반면 몸통운동이 제한된 점프에서는 엉덩관절에서의 역학적 출력의 감소를 보상하는 측면에서 무릎관절의 역할이 증가하였으나 충분치 못하였다. 또한 몸통동작의 제한으로 엉덩관절 무릎관절 발목관절의 순차적인 신전패턴과는 상이하게 추진시점 직후 엉덩관절과 무릎관절이 동시에 신전하는 형태의 점프가 이루어져 협응패턴의 변화가 나타났다. 결국 본 연구의 결과 몸통의 적절한 사용은 수직점프의 수행 향상에 효과적으로 기여하는 것으로 나타났다.

• 한국산업융합학회 논문집
• /
• 제18권2호
• /
• pp.75-81
• /
• 2015

This study proposes an articulated robot control system using an on/off-line robot graphic simulator with multiple networks. The proposed robot control system consists of a robot simulator using OpenGL, a robot controller based on a DSP(TMS320) motion board, and the server/client communication by multiple networks. Each client can control the real robot through a server and can compare the real robot motion with the virtual robot motion in the simulation. Also, all clients can check and analyze the robot motion simultaneously through the motion image and data of the real robot. In order to show the validity of the presented system, we present an experimental result for a 6-axis vertical articulated robot. The proposed robot control system is useful, especially, in the industrial fields using remote robot control as well as industrial production automation with many clients.