DOI QR코드

DOI QR Code

Minimizing the extra-oral time in autogeneous tooth transplantation: use of computer-aided rapid prototyping (CARP) as a duplicate model tooth

  • Lee, Seung-Jong (Microscope Center, Department of Conservative Dentistry and Oral Science Research Center, Yonsei University College of Dentistry) ;
  • Kim, Eui-Seong (Microscope Center, Department of Conservative Dentistry and Oral Science Research Center, Yonsei University College of Dentistry)
  • 투고 : 2012.01.26
  • 심사 : 2012.03.30
  • 발행 : 2012.08.31

초록

Objectives: The maintenance of the healthy periodontal ligament cells of the root surface of donor tooth and intimate surface contact between the donor tooth and the recipient bone are the key factors for successful tooth transplantation. In order to achieve these purposes, a duplicated donor tooth model can be utilized to reduce the extra-oral time using the computer-aided rapid prototyping (CARP) technique. Materials and Methods: Briefly, a three-dimensional digital imaging and communication in medicine (DICOM) image with the real dimensions of the donor tooth was obtained from a computed tomography (CT), and a life-sized resin tooth model was fabricated. Dimensional errors between real tooth, 3D CT image model and CARP model were calculated. And extra-oral time was recorded during the autotransplantation of the teeth. Results: The average extra-oral time was 7 min 25 sec with the range of immediate to 25 min in cases which extra-oral root canal treatments were not performed while it was 9 min 15 sec when extra-oral root canal treatments were performed. The average radiographic distance between the root surface and the alveolar bone was 1.17 mm and 1.35 mm at mesial cervix and apex; they were 0.98 mm and 1.26 mm at the distal cervix and apex. When the dimensional errors between real tooth, 3D CT image model and CARP model were measured in cadavers, the average of absolute error was 0.291 mm between real teeth and CARP model. Conclusions: These data indicate that CARP may be of value in minimizing the extra-oral time and the gap between the donor tooth and the recipient alveolar bone in tooth transplantation.

키워드

참고문헌

  1. Lee SJ, Jung IY, Lee CY, Choi SY, Kum KY. Clinical application of computer-aided rapid prototyping for tooth transplantation. Dent Traumatol 2001;17:114-119
  2. Andreasen JO. Interrelation between alveolar bone and periodontal ligament repair after replantation of mature permanent incisors in monkeys. J Periodontal Res 1981; 16:228-235.
  3. Hupp JG, Mesaros SV, Aukhil I, Trope M. Periodontal ligament vitality and histologic healing of teeth stored for extended periods before transplantation. Endod Dent Traumatol 1998;14:79-83.
  4. Andreasen JO. Periodontal healing after replantation and autotransplantation of incisors in monkeys. Int J Oral Surg 1981;10:54-61.
  5. Choi JY, Choi JH, Kim NK, Kim Y, Lee JK, Kim MK, Lee JH, Kim MJ. Analysis of errors in medical rapid prototyping models. Int J Oral Maxillofac Surg 2002; 31:23-32.
  6. Lill W, Solar P, Ulm C, Watzek G, Blahout R, Matejka M. Reproducibility of three-dimensional CT-assisted model production in the maxillofacial area. Br J Oral Maxillofac Surg 1992;30:233-236.
  7. Lee SJ, Kim E, Kim KD, Lee SJ. In vitro study for Accuracy of computer aided rapid prototyping model(CARP model) compared with real donor tooth in autogenous tooth transplantation. J Korean Dent Assoc 2006;44:115-122.
  8. Kim E, Jung JY, Cha IH, Kum KY, Lee SJ. Evaluation of the prognosis and causes of failure in 182 cases of autogenous tooth transplantation. Oral Surg Oral Med Oral Pathol Oral Radiol Endod 2005;100:112-119.
  9. Sobhi MB, Rana MJ, Manzoor MA, Ibrahim M, Tasleemul- Hudda. Autotransplantation of endodontically treated third molars. J Coll Physicians Surg Pak 2003;13:372-374
  10. Mejàre B, Wannfors K, Jansson L. A prospective study on transplantation of third molars with complete root formation. Oral Surg Oral Med Oral Pathol Oral Radiol Endod 2004;97:231-238.
  11. Cohen AS, Shen TC, Pogrel MA. Transplanting teeth successfully: autografts and allografts that work. J Am Dent Assoc 1995;126:481-485.
  12. Schwartz O, Bergmann P, Klausen B. Autotransplantation of human teeth. A life-table analysis of prognostic factors. Int J Oral Surg 1985;14:245-258.
  13. Nethander G, Andersson JE, Hirsch JM. Autogenous free tooth transplantation in man by a 2-stage operation technique. A longitudinal intra-individual radiographic assessment. Int J Oral Maxillofac Surg 1988;17:330-336.
  14. Andreasen JO, Paulsen HU, Yu Z, Schwartz O. A longterm study of 370 autotransplanted premolars. Part III. Periodontal healing subsequent to transplantation. Eur J Orthod 1990;12:25-37.
  15. Van Hassel HJ, Oswald RJ, Harrington GW. Replantation 2. The role of the periodontal ligament. J Endod 1980;6:506-508.
  16. Andreasen JO. Root fractures, luxation and avulsion injuries-diagnosis and management. In: Gutmann JL, Harrison JW, eds. Proceedings of the International Conference on Oral Trauma. American Association of Endodontics, Chicago, 1986, p79-92.
  17. Hammarström L, Blomlöf L, Lindskog S. Dynamics of dentoalveolar ankylosis and associated root resorption. Endod Dent Traumatol 1989;5:163-175.
  18. Andreasen JO, Kristerson L. The effect of extra-alveolar root filling with calcium hydroxide on periodontal healing after replantation of permanent incisors in monkeys. J Endod 1981;7:349-354.
  19. Andreasen JO, Andreasen FM. Textbook and color atlas of traumatic injuries to the teeth. 3rd ed. St. Louis: Mosby Co; 1994. p18.
  20. Goerig AC, Nagy WW. Successful intentional reimplantation of mandibular molars. Quintessence Int 1988; 19:585-588.
  21. Nethander G. Periodontal conditions of teeth autogenously transplanted by a two-stage technique. J Periodontal Res 1994;29:250-258.

피인용 문헌

  1. Autotransplantation of mesiodens for missing maxillary lateral incisor with cone-beam CT-fabricated model and orthodontics vol.47, pp.9, 2014, https://doi.org/10.1111/iej.12223
  2. 3D-printing techniques in a medical setting: a systematic literature review vol.15, pp.1, 2016, https://doi.org/10.1186/s12938-016-0236-4
  3. Contemporary Approach to Autotransplantation of Teeth with Complete Roots Using 3D-printing Technology vol.44, pp.4, 2017, https://doi.org/10.5933/JKAPD.2017.44.4.461
  4. Applications of additive manufacturing in dentistry: A review pp.15524973, 2018, https://doi.org/10.1002/jbm.b.33961
  5. Computer-aided autotransplantation of teeth with 3D printed surgical guides and arch bar: a preliminary experience vol.6, pp.2167-8359, 2018, https://doi.org/10.7717/peerj.5939
  6. Endodontic applications of 3D printing vol.51, pp.9, 2018, https://doi.org/10.1111/iej.12917
  7. Immediate autotransplantation of third molars: an experience of 57 cases vol.118, pp.4, 2012, https://doi.org/10.1016/j.oooo.2014.05.011
  8. Virtual Simulation of Autotransplantation Using 3-dimensional Printing Prototyping Model and Computer-assisted Design Program vol.44, pp.12, 2012, https://doi.org/10.1016/j.joen.2018.08.010
  9. Autotransplantation of mature impacted tooth to a fresh molar socket using a 3D replica and guided bone regeneration: two years retrospective case series vol.19, pp.1, 2019, https://doi.org/10.1186/s12903-019-0945-8
  10. Successful pulp revascularization of an autotransplantated mature premolar with fragile fracture apicoectomy and plasma rich in growth factors: a 3‐year follow‐up vol.53, pp.3, 2012, https://doi.org/10.1111/iej.13230
  11. Clinical procedures and outcome of surgical extrusion, intentional replantation and tooth autotransplantation – a narrative review vol.53, pp.12, 2020, https://doi.org/10.1111/iej.13396
  12. The use of 3D additive manufacturing technology in autogenous dental transplantation vol.6, pp.1, 2020, https://doi.org/10.1186/s41205-020-00070-9
  13. European Society of Endodontology position statement: Surgical extrusion, intentional replantation and tooth autotransplantation vol.54, pp.5, 2012, https://doi.org/10.1111/iej.13456
  14. Pre- and peri-operative factors influence autogenous tooth transplantation healing in insufficient bone sites vol.21, pp.1, 2012, https://doi.org/10.1186/s12903-021-01686-x