• Restorative Dentistry and Endodontics
• /
• v.37 no.3
• /
• pp.136-141
• /
• 2012

Objectives: The maintenance of the healthy periodontal ligament cells of the root surface of donor tooth and intimate surface contact between the donor tooth and the recipient bone are the key factors for successful tooth transplantation. In order to achieve these purposes, a duplicated donor tooth model can be utilized to reduce the extra-oral time using the computer-aided rapid prototyping (CARP) technique. Materials and Methods: Briefly, a three-dimensional digital imaging and communication in medicine (DICOM) image with the real dimensions of the donor tooth was obtained from a computed tomography (CT), and a life-sized resin tooth model was fabricated. Dimensional errors between real tooth, 3D CT image model and CARP model were calculated. And extra-oral time was recorded during the autotransplantation of the teeth. Results: The average extra-oral time was 7 min 25 sec with the range of immediate to 25 min in cases which extra-oral root canal treatments were not performed while it was 9 min 15 sec when extra-oral root canal treatments were performed. The average radiographic distance between the root surface and the alveolar bone was 1.17 mm and 1.35 mm at mesial cervix and apex; they were 0.98 mm and 1.26 mm at the distal cervix and apex. When the dimensional errors between real tooth, 3D CT image model and CARP model were measured in cadavers, the average of absolute error was 0.291 mm between real teeth and CARP model. Conclusions: These data indicate that CARP may be of value in minimizing the extra-oral time and the gap between the donor tooth and the recipient alveolar bone in tooth transplantation.

• Restorative Dentistry and Endodontics
• /
• v.38 no.1
• /
• pp.48-51
• /
• 2013

The autogenous tooth transplantation is an alternative treatment replacing a missing tooth when a suitable donor tooth is available. It is also a successful treatment option to save significant amount of time and cost comparing implants or conventional prosthetics. These cases, which required single tooth extraction due to deep caries and severe periodontal disease, could have good results by transplanting non-functional but sound donor tooth to the extraction site.

• Proceedings of the KACD Conference
• /
• 2003.11a
• /
• pp.622-622
• /
• 2003

Autotransplantation is a viable option for the treatment of a missing tooth or for replacement of avulsed and traumatized tooth when there is a donor tooth available. The maintenance of healthy periodontal ligament cells in the donor tooth is one of the most important factors for successful tooth transplantation. The purpose of this study was to evaluate the prognosis and the cause of failure in 182 auto-transplanted teeth. A total of 182 cases which received the auto-transplantation in Department of Conservative dentistry, Yonsei Dental Hospital were included in this study.(omitted)

• The korean journal of orthodontics
• /
• v.48 no.2
• /
• pp.125-130
• /
• 2018

Traumatic dental injury is considered a public dental health problem because of a high childhood incidence, high treatment costs, and prolonged treatment time. Although management guidelines for traumatized teeth have been outlined, tooth loss following trauma is occasionally unavoidable. Here, we describe the successful interdisciplinary management of a traumatized central incisor in an 11-year old boy that was extracted because of a poor prognosis and restored by the autotransplantation of an immature donor tooth into the site. The patient underwent orthodontic treatment in order to close the donor site space and bring the autotransplanted tooth to an ideal position. Postorthodontic treatment radiographs and photographs revealed an esthetic and functional natural tooth replacing the lost tooth. The findings from this case suggest that autotransplantation offers unique advantages as a treatment modality for the restoration of missing teeth, particularly in growing children.

• The Journal of the Korean dental association
• /
• v.42 no.11 s.426
• /
• pp.779-789
• /
• 2004

• Restorative Dentistry and Endodontics
• /
• v.40 no.3
• /
• pp.236-240
• /
• 2015

Traumatic dental injury can result in avulsion of anterior teeth. In young patients, it is a challenge to the dental professional because after replantation, late complications such as ankylosis require tooth extraction. Although prosthetic and orthodontic treatment, and implant placement have been described as the options for intervention, autogenous tooth transplantation could be an effective procedure in growing patients if there is a suitable donor tooth available. This case presents the treatment of a patient who suffered a traumatic injury at 9 years old with avulsion of tooth 21, which had been replanted, and intrusion of tooth 11. Both teeth ankylosed; thus they were removed and autotransplantation of premolars was carried out. After transplantation, the tooth underwent root canal treatment because of pulpal necrosis. Orthodontic treatment began 3 months after transplantation and during 7 years' follow-up the aesthetics and function were maintained without signs of resorption.

• The Journal of the Korean dental association
• /
• v.44 no.2 s.441
• /
• pp.115-122
• /
• 2006

Objective : The purpose of this study was to evaluate the dimensional errors between real tooth, 3D CT image and CARP model. Materials and Methods : Two maxilla and two mandible block bones with intact teeth were taken from two cadavers. Computed tomography was taken either in dry state and in wet state. After then, all teeth were extracted and the dimensions of the real teeth were measured using a digital caliper at mesio-distal and bucco-lingual width both in crown and cervical portion. 3D CT image was generated using the V-works $4.0^{TM}$ (Cybemed Inc., Seoul, Korea) software. Twelve teeth were randomly selected for CARP model fabrication. All the measurements of 3D Ct images and CARP models were made in the same manner of the real tooth group. Dimensional errors between real tooth, 3D CT image model and CARP model was calculated. Results : 1) Average of absolute error was 0.199 mm between real teeth and 3D CT image model, 0.169 mm between 3D CT image model and CARP model and 0.291 mm between real teeth and CARP model, respectively. 2) Average size of 3D CT image was smaller than real teeth by 0.149 mm and that of CARP model was smalier than 3D CT image model by 0.067mm. Conclusion : Within the scope of this study, CARP model with the 0.291 mm average of absolute eror can aid to enhance the success rate cf autogenous tooth transplantation due to the increased accuracy of recipient bone and donor tooth.

• Imaging Science in Dentistry
• /
• v.43 no.3
• /
• pp.135-143
• /
• 2013

Purpose: This study was performed to obtain a quantitative evaluation of the cortical and cancellous bone graft harvestable from the mental and canine regions, and to evaluate the cortical vestibular thickness. Materials and Methods: This study collected cone-beam computed tomographic (CBCT) images of 100 Italian patients. The limits of the mental region were established: 5 mm in front of the medial margin of each mental foramen, 5 mm under the apex of each tooth present, and above the inferior mandibular cortex. Cortical and cancellous bone volumes were evaluated using SimPlant software (SimPlant 3-D Pro, Materialize, Leuven, Belgium) tools. In addition, the cortical vestibular thickness (minimal and maximal values) was evaluated in 3 cross-sections corresponding to the right canine tooth (3R), the median section (M), and the left canine tooth (3L). Results: The cortical volume was $0.71{\pm}0.23mL$ (0.27-1.96 mL) and the cancellous volume was $2.16{\pm}0.76mL$ (0.86-6.28 mL). The minimal cortical vestibular thickness was $1.54{\pm}0.41mm$ (0.61-3.25 mm), and the maximal cortical vestibular thickness was $3.14{\pm}0.75mm$ (1.01-5.83 mm). Conclusion: The use of the imaging software allowed a patient-specific assessment of mental and canine region bone availability. The proposed evaluation method might help the surgeon in the selection of the donor site by the comparison between bone availability in the donor site and the reconstructive exigency of the recipient site.

• Journal of the Optical Society of Korea
• /
• v.15 no.4
• /
• pp.362-367
• /
• 2011

Organic ($Alq_3$) film, which was coated on a donor plate, was transferred to an organic light emitting diode (OLED) substrate with help of heat generated by a dithering laser beam. The laser beam was diffracted in an acousto-optic modulator (AOM), then focused on the laser-to-heat converting layer of the donor plate; the focused spot followed trajectories guided by rotation of a Galvano-mirror. Three different functional waveforms, sine wave, square wave, and saw tooth wave were applied to the AOM as modulation signal to generate the dithering beam. The fluorescence microscope images of the donor plate showed that the patterns of removed $Alq_3$ film were affected considerably by the modulation waveforms and the phase difference between adjacent dithering beams. Further, the printed images of Alq3 film on the OLED substrate were different from the patterns of removed Alq3 film. Atomic force microscope images indicated that not only direct transfer but also deposition by sublimated vapor of Alq3 contributed to the pattern formation. Printed patterns affected considerably the electricity-to-light conversion characteristics of OLEDs. For uniform transfer, not only the phase relation of dithering beam lines but also adequate waveform were important.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.44 no.3
• /
• pp.317-326
• /
• 2017

The aim of this study was to investigate the survival and success rates of autotransplanted maxillary canine at the artificially formed recipient socket and evaluate the factors that influence survival and success rates. A total of 28 children who had 37 impacted canines were reviewed over the mean observation time of 25.1 months. Tooth mobility, pathologic root resorption, vertical bone loss, periapical lesion and anklyosis of donor tooth were investigated clinically and radiographically. The survival rate was 100%. The success rate was 64.9%, because 13 teeth were evaluated as unsuccessful. Significant parameter in determining the success rate of autotransplantation was enlarged follicle size of donor tooth according to Cox proportional hazard regression model. The results provide information necessary for clinician to make a better treatment decision about autotransplantation at the artificially formed recipient socket.