DOI QR코드

DOI QR Code

A/W사로 편성한 1×1 리브편의 물성 평가

Physical Properties of 1×1 Rib Knitted Fabrics Using A/W

  • 예수정 (숙명여자대학교 의류학과) ;
  • 김인영 (숙명여자대학교 의류학과)
  • Yea, Su-Jeong (Dept. of Clothing and Textiles, Sookmyung Women's University) ;
  • Kim, In-Young (Dept. of Clothing and Textiles, Sookmyung Women's University)
  • 투고 : 2011.09.01
  • 심사 : 2012.06.19
  • 발행 : 2012.08.31

초록

Knitted fabric using acrylic/wool blended yarn (A/W) is increasingly used in the knit industry; subsequently, research on knitted fabric using A/W has increased. This study presents an scientific database from evaluating physical properties of $1{\times}1$ rib stitch using A/W. In this study,$1{\times}1$ rib stitch using A/W were made at various knitting tensions (dial no. 2-6) and the number (4-6) of ply yarn. The physical properties of $1{\times}1$ rib stitch using A/W were measured and analyzed. The density was in the range 5.5-6.4 wales/cm and 4.0-5.6 courses/cm, respectively. The density increased when less plying yarns and more knitting tension were added during knitting. The thickness was in the range of 1.592-2.362 mm and the tensile strength was in the range 32.75-53.63 Kgf/mm. The burst strength was in the range 107.8-139.2 $N/cm^2$. Thickness, tensile strength, and burst strength increased as the number of ply yarn and the knitting tension increased. The elongation and the recovery extension rate were in the range 102.29-112.13% and 96.4-97.7%, respectively. The heat retention rate was in the range 59.3-65.1%. There was no difference of the elongation and the recovery extension rate and the heat retention rate by the knitting tension and the number of the ply yarn. The permeability was in the range 170.5-396.3 $cm^3/cm^2/sec$. Air permeability decreased as the number of ply yarn and the knitting tension increased. The pilling properties were excellent for all $1{\times}1$ rib stitches.

키워드

참고문헌

  1. Green Apparel Technology Center. (2011). Knitwear & sweater manpower training program II. Seoul: Author.
  2. Herath, C. N., & Kang, B. C. (2009). Effect of washing cycles on behavior of core spun cotton/spandex interlock structures. Fibers and Polymers, 10(2), 209-216. https://doi.org/10.1007/s12221-009-0209-3
  3. Kim, G. H. (2005). The study about fabric's physical properties for the knit wear design. The Journal of the Korean Society of Knit Design, 3(2), 22-34.
  4. Kim, M. J., & Park, M. J. (2007). The subjective sensibility evaluation of the S/S acrylic fabrics knitted with various blended and twisted yarns. Journal of the Korean Fashion & Costume Design Association, 9(1), 35-50.
  5. Kwon, D. Y., & Kwon, Y. A. (2009). A study on the physical properties and the handle of silver combined knit. Journal of the Korean Society for Clothing Industry, 11(4), 641-647.
  6. Lee, S. H., & Kim, E. S. (1989). A study about the change of physical properties according to stitch density of weft knitted fabrics. The Journal of Living Culture Research, 3, 37-61.
  7. Park, I. O. (1991). Change of dimension and handle of wool and acrylic blend weft knitted fabric by laundering. Unpublished master's thesis, Sookmyung Women's University, Seoul.
  8. Park, M. J., Lee, Y. H., & Kwak, S. K. (2004). Shrink-resist effects and properties of the knitted fabrics from wool/acrylic fiber blends. The Research Journal of the Costume Culture, 12(6), 945-952.
  9. Roh, E. K., & Kim, S. H. (2008). Effect of knit fabric constituent characteristics on preference. Journal of the Korean Society of Clothing and Textiles, 32(4), 651-658. https://doi.org/10.5850/JKSCT.2008.32.4.651