DOI QR코드

DOI QR Code

임의 형상 평판의 고정밀도 고유진동수 추출을 위한 분할영역법 기반 NDIF법 개발

Development of the NDIF Method Using a Sub-domain Approach for Extracting Highly Accurate Natural Frequencies of Arbitrarily Shaped Plates

  • 강상욱 (한성대학교 기계시스템공학과) ;
  • 윤주일 (한성대학교 기계시스템공학과)
  • 투고 : 2012.05.23
  • 심사 : 2012.06.29
  • 발행 : 2012.09.20

초록

The NDIF method based on a sub-domain technique is introduced to extract highly accurate natural frequencies of arbitrarily shaped plates with the simply-supported boundary condition. The NDIF method, which was developed by the authors for the eigen-mode analysis of arbitrarily shaped plates with various boundary conditions, has the feature that it yields highly accurate natural frequencies thanks to its effective theoretical formulation, compared with other analytical methods or numerical methods(FEM and BEM). However, the NDIF method has the weak point that it can be applicable for only convex plates. It was revealed that the NDIF method offers very inaccurate natural frequencies or no solution for concave cavities. To overcome the weak point, the paper proposes the sub-domain method of dividing a concave plate into several convex domains. Finally, the validity of the proposed method is verified in various case studies, which indicate that natural frequencies obtained by the proposed method are very accurate compared to the exact method and FEM(ANSYS).

키워드

참고문헌

  1. Bathe, K., 1982, Finite Element Procedures in Engineering Analysis, Prentice-Hall, New Jersey.
  2. Brebbia, C. A., Telles, J. C. F. and Wrobel, L. C., 1984, Boundary Element Techniques, Springer-Verlag, New York.
  3. Kang, S. W. and Lee, J. M., 1999, Vibration Analysis of Arbitrarily Shaped Membrane Using Non-dimensional Dynamics Influence Function, Journal of Sound and Vibration, Vol. 221, pp. 117-132. https://doi.org/10.1006/jsvi.1998.2009
  4. Kang, S. W. and Lee, J. M., 2000, Application of Free Vibration Analysis of Membranes Using the Non-dimensional Dynamics Influence Function, Journal of Sound and Vibration, Vol. 234, No. 3, pp. 455-470. https://doi.org/10.1006/jsvi.1999.2872
  5. Kang, S. W. and Lee, J. M., 2000, Eigenmode Analysis of Arbitrarily Shaped Two-dimensional Cavities by the Method of Point-matching, Journal of the Acoustical Society of America, Vol. 107, No. 3, pp. 1153-1160. https://doi.org/10.1121/1.428456
  6. Kang, S. W. and Lee J. M., 2001, Free Vibration Analysis of Arbitrarily Shaped Plates with Clamped Edges Using Wave-type Functions, Journal of Sound and Vibration, Vol. 242, No. 1, pp. 9-26. https://doi.org/10.1006/jsvi.2000.3347
  7. Kang, S. W., 2002, Free Vibration Analysis of Arbitrarily Shaped Plates with a Mixed Boundary Condition Using Non-dimensional Dynamic Influence Functions, Journal of Sound and Vibration, Vol. 256, No. 3, pp. 533-549. https://doi.org/10.1006/jsvi.2002.5009
  8. Kang, S. W., et al., 2003, Free Vibration Analysis of Arbitrarily Shaped Plates With Free Edges Using Non-dynamic Influence Functions, Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 13, No. 10, pp. 821-827. https://doi.org/10.5050/KSNVN.2003.13.10.821
  9. Kang, S. W., 2007, Free Vibration Analysis of Arbitrarily Shaped Polygonal Plates With Free Edges by Considering the Phenomenon of Stress Concentration at Corners, Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 17, No. 3, pp. 220-225. https://doi.org/10.5050/KSNVN.2007.17.3.220
  10. Kang, S. W., Kim, I. S. and Lee, J. M., 2008, Free Vibration Analysis of Arbitrarily Shaped Plates with Smoothly Varying Free Edges Using NDIF Method, Journal of Vibration and Acoustics, Transaction of ASME, Vol. 130, No. 4, pp. 041010.1-041010.8.
  11. Kang, S. W. and Atluri, S. N., 2008, Development of Meshless Method for Free Vibration Analysis of Arbitrarily Shaped Free Plates Using Local Polar Coordinates, Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 18, No. 6, pp. 674-680. https://doi.org/10.5050/KSNVN.2008.18.6.674
  12. Kang, S. W. and Atluri, S. N., 2009, Free Vibration Analysis of Arbitrarily Shaped Polygonal Plates with Simply Supported Edges Using a Sub-domain Method, Journal of Sound and Vibration, Vol. 327, pp. 271-284. https://doi.org/10.1016/j.jsv.2009.07.017
  13. Blevins, R. D., 1979, Formulas for Natural Frequency and Mode Shape, Litton Educational Publishing, New York.
  14. Conway, H. D. and Farnham, K. A., 1965, The Free Flexural Vibration of Triangular, Rhombic and Parallelogram Plates and Some Analogies, International Journal of Mechanical Sciences, Vol. 7, pp. 811-816. https://doi.org/10.1016/0020-7403(65)90034-2
  15. Meirovitch, L., 1967, Analytical Methods in Vibrations, Macmillan Publishing, New York.

피인용 문헌

  1. New Formulation of MNDIF Method for Extracting Accurate Natural Frequencies of Plates vol.23, pp.8, 2013, https://doi.org/10.5050/KSNVE.2013.23.8.725
  2. Efficient Meshless Method for Accurate Eigenvalue Analysis of Clamped Plates vol.25, pp.10, 2015, https://doi.org/10.5050/KSNVE.2015.25.10.653