참고문헌
- The Institute of Electrical Engineers of Japan, Power Semiconductor That Runs the World (in Japanese), Ohmsha, Ltd., Tokyo, 2009.
- C. R. Eddy Jr. and D. K. Gaskill, "Silicon Carbide as a Platform for Power Electronics," Science, 324 [5933] 1398-400 (2009). https://doi.org/10.1126/science.1168704
- M. Yamagiwa, "Packaging Technologies of Power Modules for Hybrid Electric Vehicles and Electric Vehicles (in Japanese)," Bull. Ceram. Soc. Japan, 45 [6] 432-37 (2010).
- K. Hirao, "Development of Ceramic Substrates with High Thermal Conductivity (in Japanese)," Bull. Ceram. Soc. Jpn, 45 [6] 444-47 (2010).
- M. Kitayama, K. Hirao, M. Toriyama, and S. Kanzaki, "Thermal Conductivity of Beta-Si3N4: I, Effects of Various Microstructural Factors," J. Am. Ceram. Soc., 82 [11] 3105-12 (1999).
- A. Okada and K. Hirao, "Conduction Mechanism and Development of High Thermal Conductive Silicon Nitride (in Japanese)," Bull. Ceram. Soc. Jpn, 39 [3] 172-76 (2004).
-
M. Kitayama, K. Hirao, A. Tsuge, K. Watari, M. Toriyama, and S. Kanzaki, "Thermal Conductivity of Beta-
$Si_3N_4$ : II, Effect of Lattice Oxygen," J. Am. Ceram. Soc., 83 [8] 1985-92 (2000). - K. Hirao, K. Watari, H. Hayashi, and M. Kitayama, ''High Thermal Conductivity Silicon Nitride Ceramics,'' MRS Bull., 26 [6] 451-55 (2001). https://doi.org/10.1557/mrs2001.115
- K. Watari, "High Thermal Conductivity Non-oxide Ceramics," J. Ceram. Soc. Jpn, 109 [1] S7-S16 (2001). https://doi.org/10.2109/jcersj.109.S7
-
H. Hayashi, K. Hirao, M. Toriyama, S. Kanzaki, and K. Itatani, ''
$MgSiN_2$ Addition as a Means of Increasing the Thermal Conductivity of b Silicon Nitride,'' J. Am. Ceram. Soc., 84 [12] 3060-62 (2001). https://doi.org/10.1111/j.1151-2916.2001.tb01141.x - A. J. Moulson, ''Reaction-Bonded Silicon Nitride: Its Formation and Properties,'' J. Mater. Sci., 14 1017-51 (1979). https://doi.org/10.1007/BF00561287
- X. W. Zhu, Y. Zhou, K. Hirao, and Z. Lences, ''Processing and Thermal Conductivity of Sintered Reaction-Bonded Silicon Nitride. I: Effect of Si Powder Characteristics,'' J. Am. Ceram. Soc., 89 [11] 3331-39 (2006). https://doi.org/10.1111/j.1551-2916.2006.01195.x
- Y. Zhou, X. W. Zhu, K. Hirao, and Z. Lences, "Sintered Reaction-Bonded Silicon Nitride with High Thermal Conductivity and High Strength," Int. J. Appl. Ceram. Technol., 5 [2] 119-26 (2008). https://doi.org/10.1111/j.1744-7402.2008.02187.x
- Y. Zhou and H. Hyuga, "Development of High Thermal Conductivity Silicon Nitride Ceramics (in Japanese)," Bull. Ceram. Soc. Jpn, 47 [1] 12-17 (2012).
- Y. Zhou H. Hyuga, D. Kusano, Y. Yoshizawa, and K. Hirao, "A Tough Silicon Nitride Ceramic with High Thermal Conductivity," Adv. Mater., 23 (39) 4563-67 (2011). https://doi.org/10.1002/adma.201102462
- D. Kusano, S. Adachi, G. Tanabe, H. Hyuga, Y. Zhou, and K. Hirao, "Effects of Impurity Oxygen Content in Raw Si Powder on Thermal and Mechanical Properties of Sintered Reaction-Bonded Silicon Nitrides," Int. J. Appl. Ceram. Technol., 9 [2] 229-38 (2012). https://doi.org/10.1111/j.1744-7402.2011.02618.x
피인용 문헌
- Microstructure and Thermal Conductivity of Silicon Carbide with Yttria and Scandia vol.97, pp.3, 2013, https://doi.org/10.1111/jace.12737
- Heat conductivity, physico-mechanical properties and interrelations of them and structures of pressureless sintered composites produced of Si3N4-Al2O3-Y2O3(-ZrO2) nanodispersed system vol.36, pp.2, 2014, https://doi.org/10.3103/S106345761402004X
- Optimization of Binder Burnout for Reaction Bonded Si3N4 Substrate Fabrication by Tape Casting Method vol.52, pp.6, 2015, https://doi.org/10.4191/kcers.2015.52.6.435
- Effects of Debinding Atmosphere on Properties of Sintered Reaction-bonded Si3N4 Prepared by Tape Casting Method vol.53, pp.6, 2016, https://doi.org/10.4191/kcers.2016.53.6.622
- Morphology control of a silicon nitride thick film derived from polysilazane precursor using UV curing and IR heat treatment vol.116, pp.7, 2017, https://doi.org/10.1080/17436753.2017.1339490
- Optimization of the tape casting process for the development of high performance silicon nitride substrate vol.14, pp.4, 2017, https://doi.org/10.1111/ijac.12679
- and MgO as sintering additives vol.14, pp.6, 2017, https://doi.org/10.1111/ijac.12704
- Effect of amounts and types of silicon nitride on thermal conductivity of Si3N4/epoxy resin composite vol.123, pp.1441, 2012, https://doi.org/10.2109/jcersj2.123.908
- Development of high-thermal-conductivity silicon nitride ceramics vol.3, pp.3, 2012, https://doi.org/10.1016/j.jascer.2015.03.003
- Microstructural evolution of Si3N4 ceramics from starting powders with different α-to-β ratios vol.124, pp.8, 2012, https://doi.org/10.2109/jcersj2.16055
- Improvement in Thermal Conductivity of Silicon Nitride Ceramics via Microstructural Control and Their Application to Heat Dissipation Substrates vol.64, pp.8, 2012, https://doi.org/10.2497/jjspm.64.439
- Dielectric breakdown of silicon nitride substrates with various thicknesses vol.126, pp.9, 2012, https://doi.org/10.2109/jcersj2.18087
- Effect of powder characteristics on the thermal conductivity and mechanical properties of Si3N4 ceramics sintered by Spark plasma sintering vol.30, pp.8, 2019, https://doi.org/10.1007/s10854-019-01074-w
- High thermal conductivity silicon nitride ceramics prepared by pressureless sintering with ternary sintering additives vol.16, pp.4, 2012, https://doi.org/10.1111/ijac.13220
- 차세대 전력반도체 소자 및 패키지 접합 기술 vol.26, pp.3, 2012, https://doi.org/10.6117/kmeps.2019.26.3.015
- Preparation of α‐Si 3 N 4 by direct nitridation using polysilicon waste by diamond wire cutting vol.17, pp.1, 2012, https://doi.org/10.1111/ijac.13254
- Promising high-thermal-conductivity substrate material for high-power electronic device: silicon nitride ceramics vol.39, pp.5, 2012, https://doi.org/10.1007/s12598-020-01376-7
- Improving the thermal conductivity of epoxy composites using a combustion-synthesized aggregated β-Si 3 N 4 filler with randomly oriented grains vol.10, pp.None, 2020, https://doi.org/10.1038/s41598-020-71745-w
- Thickness dependence of dielectric breakdown strength for silicon nitride substrate vol.129, pp.12, 2012, https://doi.org/10.2109/jcersj2.21141