초록
IEEE 802.3az LPI 메커니즘은 전송할 데이터가 없을 경우 취침 모드로 천이하여 다수의 컴포넌트들을 저전력 상태를 유지하게 함으로써 에너지 효율성을 향상시킨다. LPI는 소량의 데이터가 주기적으로 전송되는 상황에서는 잦은 전송 모드 변환에 따른 오버헤드 때문에 에너지 효율이 크게 개선되지 못하는 문제점이 있다. 본 논문에서는 전송계층 트래픽 특성 및 네트워크 상태에 따라 LPI 모드 상태 천이를 적응적으로 수행하는 개선된 LPI 메커니즘을 제안한다. 시뮬레이션 방법에 의한 성능 분석을 통해 제안한 메커니즘이 다양한 트래픽 부하에 대해서 기존 방법보다 에너지 효율성을 향상시키는 것으로 나타났다.
IEEE 802.3az LPI mechanism allows an Ethernet link to reduce power consumption by entering a low-power sleeping mode and letting some components being powered off when there is no data to be transmitted through the link. However, if small amount of packets are being sent periodically, such a mechanism can not obtain energy efficiency due to a high overhead caused by excessive mode transitions. In this paper, we propose an enhanced LPI mechanism which can perform state transition adaptively based on the traffic characteristics on transport layer and network status. This simulation result shows that proposed mechanism improves energy efficiency than LPI mechanism with respect to energy consumption rate for various traffic loads.