• 전기전자학회논문지
• /
• 제22권3호
• /
• pp.862-865
• /
• 2018

The proposed scheme minimizes the Idle time under the residual energy of the sensor node to adjust the Sleep-Wakeup period and minimize unnecessary energy consumption. It is The proposed scheme minimizes the Idle time under the residual energy of the sensor node to adjust the Sleep-Wakeup period and minimize unnecessary energy consumption. It is an important process to control the Application Packet Framework including the PHY and the MAC layer at each node's Idle time with the Idle time mechanism state before the proposed function is executed. The Current Control Level of the Report Attribute is fixed at one sending / receiving node where power consumption can occur, by changing Sleep-Wakeup time, the low power consumption efficiency was improved while satisfying the transmission requirement of the given delay time constraint.

• 한국전자통신학회논문지
• /
• 제9권9호
• /
• pp.971-976
• /
• 2014

본 논문은 상태 전환 준비 방법을 이용한 저 전력 알고리즘을 제안하였다. 제안한 알고리즘은 태스크를 휴면 상태와 유휴 상태, 동작 상태로 구분하여 상태를 정의 한다. 각각의 상태 전환이 발생될 때 발생되는 지연시간으로 인하여 발생되는 소모 전력을 줄이기 위해 각각의 상태 중간에 준비 상태를 삽입한다. 준비 과정은 상태의 전환에서 발생되는 소모 전력과 지연시간을 고려한다. 지연시간이 긴 경우에는 스케줄링에서의 단계를 초과하여 수행 단계를 증가시키는 문제를 발생시킨다. 수행 단계의 증가는 소모 전력의 증가를 초래한다. 상태 전환에서 지연시간이 가장 긴 휴면 상태에서 동작 상태로 상태가 전환될 때 발생되는 시간지연으로 인하여 발생되는 동작시간의 증가를 줄여 전체 소모 전력을 줄이게 된다. 실험은 저 전력 알고리듬인 참고문헌 [6]과 비교하였다. 실험결과 참고문헌 [6]보다 소모 전력이 감소되어 알고리듬의 효율성이 입증되었다.

• 한국분무공학회지
• /
• 제23권3호
• /
• pp.128-135
• /
• 2018

In this study, the following conclusions could be obtained from the analysis of emissions contribution rates and features for contaminated emissions by 13,456 gasoline vehicles passed in the vehicle load test (ASM-idle) under the inspection year 2013 to 2017. It was confirmed that the contamination of the CO, HC, NOx by the displacement is reduced on over 3L engine. As a result of comparing the exhaust gas in the low speed idle mode and the AS2525 mode, the exhaust gas in the low speed idle mode was measured high. It is estimated that if ISG function is applied, emissions from idle condition will be reduced. NOx emissions were reduced when the engine power was above 200HP. It has been confirmed that the amount of exhaust emissions are significantly reduced for vehicles manufactured after 2004. As a result of analyzing the exhaust gas according to the season, it is judged that there is a correlation between HC and NOx according to the ambient temperature. The concentration of exhaust emission in vehicles with high accumulated distance increases, which is considered to be the result of aging of the vehicle.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2011년도 전력전자학술대회
• /
• pp.280-282
• /
• 2011

This paper presents a development of voltage compensation dc/dc converter to decrease fuel consumption of RTGC system. We used 3-phase interleaved converter, which has the same structure as the commercially available three-phase inverter, is used. RTGC system is supplied the power from diesel-engine generator. According to power demand, engine speed is varying 20~60Hz, and voltage is varying 210Vac ~ 480Vac. When idle mode or low power operation dc/dc converter operates by constant output voltage control. The perpormance of converter is evaluated through several experiments with a real RTGC. Proposed system can cut down fuel consumption by 36% at idle mode operation.

• Journal of Electrical Engineering and Technology
• /
• 제8권1호
• /
• pp.137-143
• /
• 2013

This paper presents development of variable speed generation (VSG) system with energy saving function. The rubber tyred gantry crane (RTGC) requires the power from diesel-engine. Significant fuel savings by reducing the engine speed can be achieved, because all of operation modes except hoisting are required lower power than rated value of engine. When low speed operation output voltage of generator is decrease until acceptable range of motor driver inverters and auxiliary load supplier. According to power demand engine speed is varying from 20 to 60Hz, and voltage is varying between 210Vac and 480Vac. When idle mode or low power operation dc/dc converter operates by constant output voltage control and inverters dc site voltage is compensated by it. This paper proposed 3-phase interleaved boost converter which has the same structure as the commercially available 3-phase inverter and current sharing capability. 400kW interleaved converter is designed and a performance of converter is evaluated through several experiments with a RTGC system. Energy saving VSG system can cut down fuel consumption by 36% and 21.3% at idle and unidirectional load operations.

• 대한전자공학회논문지SD
• /
• 제46권10호
• /
• pp.53-60
• /
• 2009

반도체 공정의 발달로 집적도가 증가하고 문턱전압이 감소하면서, 반도체 집적회로 소모 전력에서 누설전류(leakage current)의 비중이 점차 증가하고 있다. 대기 상태에서 CMOS 조합 회로(combinational circuit)는 입력 값에 따라 누설전류가 크게 달라진다. 본 연구에서는 누설전류로 인한 소모전력을 줄이기 위해 대기 상태 (standby state) 회로의 입력 신호를 제어하며, 작은 누설전류를 갖는 입력 신호를 찾기 위한 새로운 효율적인 알고리즘을 개발하였다. 이 방법을 벤치마크 예제에 실험적으로 적용하여 누설전류 평균값에 비해 15.7%, simulated evolution 방법에 비해 6.7% 누설전류를 줄일 수 있음을 보였다. 또한 순차 회로에서도 idle 입력을 이용하여 누설전류 평균값에 비해 6.8%, simulated evolution 방법에 비해 3.2% 누설전류를 줄일 수 있었다.

• 한국자동차공학회논문집
• /
• 제5권3호
• /
• pp.27-34
• /
• 1997

The effects of the intake and exhaust valve timing to improve the engine performance in a spark ignition 3-cylinder LPG engine with a closed loop fuel supply system were studied. The engine torque and power have been measured using the 75kW EC-dynamometer while adjusting the optimal fuel consumption ratio with a solen- oid driver. As the results from this experiment, when intake valve opening is $12^{\circ}$ BTDC, intake valve closing is $36^{\circ}$ ABDC, exhaust valve opening is $12^{\circ}$ ATDC, and exhaust valve closing is $36^{\circ}$ BBDC respectively, the best torque characteristics in low and high speeds for a gives engine were obtained. And also we could find that the torque characteristics in low speeds were affected by the timing of exhaust valve open. An increased valve overlap by the EVC delay was ineffectual to the torque characte- ristics improvement in high speeds.

• 전자공학회논문지
• /
• 제49권10호
• /
• pp.34-42
• /
• 2012

IP Network에서 에너지 절감에 기본이 되는 에너지 절약 power 모델에 대해 분석 하고, 에너지 절약이 가능한 한 가지 방안으로 적응적 버퍼링 기법을 적용한 버스트 패킷 구성(adaptive buffering and burst) 방식 및 그의 구현 알고리즘을 제안하고, 그 특징을 설명한다. 본 논문에서는 core IP 네트워크의 ingress router에서 buffering 기간 B를 입력 트래픽에 따라 동적으로 변경하는 적응적 버퍼링 방법과 구성 방법을 설명한다. 이 방법은 주어진 범위의 버퍼링 기간 내에서, ingress 라우터의 입력 트래픽 량이 적으면 버퍼링 주기를 길게, 입력 트래픽 량이 많으면 버퍼링 주기를 짧게 조절하는 방식이며, 이는 네트워크 내에서 입력 트래픽이 적을 때 idle/active의 transition 횟수를 줄이고, 입력 트래픽이 클 때는 중계 라우터에서 버스트의 연속성에 의해 idle/active의 transition 횟수를 줄여 네트워크의 idle 기간을 늘려 에너지 절약 효과를 높이고 있다. 본 방식은 시뮬레이션을 통해 idle period를 증가 시킬 수 있음을 보여 주고, 에너지를 절약 할 수 있음을 확인 한다. 특히 본 제안 방식은 네트워크 특성과 적절히 타협하면, 네트워크 에너지를 절약 할 수 있는 방안임을 분명히 한다.

• 아태비즈니스연구
• /
• 제13권2호
• /
• pp.139-154
• /
• 2022

Purpose - This study aims to analyzing of solar power generation cost-benefit. Design/methodology/approach - We analyzed whether there is economic feasibility by selecting parking lots and idle sites located in four areas of Seoul, Gyeonggi, Chungcheong, Jeolla, and Gyeongsang areas nationwide, and analyzing site conditions and installation capacity. Findings - According to the results of the analysis, it was found that there is low profitability in Seoul, Gyeonggi and Chungcheong regions, where the solar radiation was not excellent even if REC is selected through the contract market. However, it is necessary to analyzed the economical validity the profitable validity including environmental benefits (greenhouse gas reduction, NOx, SOx reduction effect) and social benefits (renewable power supply) that is analyzed by income and operating costs which is occurred from electricity sales and REC sales when installing solar power generation facilities. Research implications or Originality - In this study, economic feasibility was evaluated additionally in consideration of environmental and social benefits. In conclusion, it was shown that businesses are not economical when considering only simple financial aspects are also sufficiently economical when it is considering environmental and social benefits.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제11권3호
• /
• pp.1393-1405
• /
• 2017

It is well known that duty-cycling control by dynamically adjusting the polling interval according to the traffic loads can effectively achieve power saving in wireless sensor networks. Thus, there has been a significant research effort in developing polling interval adaptation schemes. Especially, Dynamic Low Power Listening (DLPL) scheme is one of the most widely adopted open-looping polling interval adaptation techniques in wireless sensor networks. In DLPL scheme, if consecutive idle (busy) samplings reach a given fixed threshold, the polling interval is increased (decreased). However, due to the trial-and-error based approach, it may significantly deteriorate the system performance depending on given threshold parameters. In this paper, we propose a novel DLPL scheme, called SDL (Sequential hypothesis testing based Dynamic LPL), which employs sequential hypothesis testing to decide whether to change the polling interval conforming to various traffic conditions. Simulation results show that SDL achieves substantial power saving over state-of-the-art DLPL schemes.