초록
PBD의 통수능력은 지반조건 빛 두께에 비례하여 영향을 크게 받는 성질이 있으며, 배수재 타입 시 시용되는 맨드럴, 타입기기 및 방식에 의한 주변지반의 교란영향으로 배수성능이 저하되는 문제점 등이 있다. 또한, 여러 기지 조건에 따라 통수능의 편차가 크게 나타나며 원지반 조건에 따라 배수재의 통수능 저하, 간극수압소산의 시간지연 등의 분석이 미흡하다. 따리서 본 연구에서는 원지반 조건을 고려한 연직배수재의 복합 통수능 시험을 실시하여 지반개량 및 통수능 평가를 하였다. ${\phi}\;38{\times}70cm$ 크기의 원통형 실린더에 배수재를 고정한 후 교반한 시료를 투기하고 원지반 조건 CL, ML, SM과 준설토 CL을 매립한 후 가입장치를 사용하여 30, 70, 120 kpa의 하중을 가해 단계별로 복합통수능 실험을 수행하였다. 시험결과, 통수능의 크기는 원지반 조건이 SM>ML>CL>CL(준설토)인 순으로, 세립분 함량이 적을수록 통수량은 크게 나타났다.
Discharge capacity of PBD is sensitive in proportion to thickness and ground condition, and drainage of PBD declines due to disturbance effect in surrounding ground by mandrel used for vertical drainage setting and setting machines and type. Also, deviation of discharge capacity gets larger according to ground condition, construction condition and soil properties. But cause and analysis of those problems like reduced discharge of capacity and delayed dissipation of pore water pressure for discharge capacity is lack. Thus, in this text, ground improvement and discharge capacity is investigated by implementing composite discharge capacity test for analysis of an effect factor of PBD discharge capacity with in-situ ground condition. After fixing the vertical drain on a cylindrical cylinder, put churned sample into the cylinder. After in-situ ground and reclamation of ground are dredged, load following the loading step of 30, 70 and 120kPa using a pressure device. Result of the test, The discharge capacity was SM>ML>CL>CL(dredged soil) in situ condition and more fine-grained content, the amount of discharge was greater.