한국건설순환자원학회논문집 (Journal of the Korean Recycled Construction Resources Institute)
- 제7권1호
- /
- Pages.76-83
- /
- 2012
- /
- 1975-5201(pISSN)
품질향상재 종류 및 치환율 변화에 따른 순환잔골재 사용 고로슬래그 모르타르의 품질향상
Improvement of Blast Furnace Slag Mortar Using the Recycled Fine Aggregates Depending on Improvement Material Type and Replacement Ratio
-
Han, Cheon-Goo
(Dept. of Architectural Engineering Graduate School Cheong-ju University) ;
- Kim, Dae-Gun (Dept. of Architectural Engineering Graduate School Cheong-ju University)
- 투고 : 2012.03.29
- 심사 : 2012.04.17
- 발행 : 2012.04.20
초록
본 연구는 RA 사용 BS 모르타르의 품질향상에 미치는 FC, WG, RP의 치환율 변화에 따른 영향을 검토하였다. 먼저, 플로우는 FC 치환율이 증가할수록 증가하였고, WG 및 RP 치환율이 증가할수록 저하하는 경향을 나타내었다. 공기량은 FC 및 RP 치환율이 증가할수록 감소하였고, WG 치환율이 증가할수록 증가하는 경향을 나타내었다. 압축강도 특성으로 배합비 1 : 7의 경우 FC 및 WG 치환율이 증가할수록 강도가 증가한 반면, RP 치환율이 증가할수록 저하하는 경향을 보였으나, 배합비가 커짐에 따라 RP의 경우도 압축강도가 상승하는 경우도 존재하였는데, 품질향상재 종류 및 치환율에 따른 차이는 점차 감소하였다. 흡수율은 모든 배합비에서 FC 및 RP 치환율이 증가할수록 저하하는 경향을 보였으며, WG가 사용된 경우는 다소 높게 나타났다. 한편, 상호관계로는 모든 배합비에서 압축강도가 증가할수록 흡수율은 감소하는 경향을 보였는데, 품질향상재 종류에 따라서는 FC, RP, WG의 순이었다. 종합 분석으로 품질향상 측면은 FC 및 WG가 가장 유리한 것으로 나타났지만, 경제성 및 자원재활용 측면까지 고려하면 WG와 RP가 가장 효과적인 것으로 나타났다.
In this study, the research examined the effect on FC, WG, RP replacement ratio on the quality improvement of BS mortar using the RA. First of all, the flow value increased as the FC contents increased, and decreased as the WG and RP contents increased. The air contents was reduced as the FC and RP contents increased, but was increased as the WG contents went up While the compressive strength of 1 : 7 mix proportion increased with the increase of the FC and WG contents, it decreased as there was more RP contents. The compressive strength of RP could increase as the mix proportion increased, but the difference depending on the improvement material type and replacement ratio decreased gradually. The absorption deteriorated as the FC and RP contents increased in all the mix proportions, but improved a little when WG was used. Meanwhile, the absorption decreased as the compressive strength improved in all the mix proportions as a correlation, but the order was FC, RP and WG depending on the quality improvement material types. The FC and WG were most favorable in terms of quality improvement as a total analysis, and the RP and WG was most effective in terms of economical efficiency and resource recycling.
키워드