DOI QR코드

DOI QR Code

A Study On the Safety Management of construction equipment Using Smart Phone Technology (Focused on poclain and mobile elevated work platform)

"스마트폰" 기반을 활용한 건설장비 안전관리에 관한 연구 (굴삭기, 고소작업대 중심으로)

  • Cho, Joung-Ho (Dept. of Industrial Engineering, Graduate School, University of Myongji) ;
  • Lim, Jae-Chang (Dept. of Industrial Engineering, Graduate School, University of Myongji) ;
  • Ko, Young-Wook (Dept. of Industrial Engineering, Graduate School, University of Myongji) ;
  • Kang, Kyung-Sik (Dept. of Industrial Engineering, Graduate School, University of Myongji)
  • 조정호 (명지대학교 산업경영공학과) ;
  • 임재창 (명지대학교 산업경영공학과) ;
  • 고영욱 (명지대학교 산업경영공학과) ;
  • 강경식 (명지대학교 산업경영공학과)
  • Received : 2012.04.18
  • Accepted : 2012.06.05
  • Published : 2012.06.30

Abstract

As contemporary building construction type is getting higher and deeper, construction equipment usage is getting more, and related fatal accidents are on an increasing trend. Because of this, a method was drawn which could grasp the present state of construction equipment management and manage safety of the equipment more easily for accident prevention by choosing 2 kinds of Construction equipment which cause safety accident frequently among the equipment mainly used in construction site. This study suggested a method about construction equipment safety management using "smart phone" base which could be used in safety management for construction equipment by whomever in construction site. After attachment of QR code included safety checklist, It became possible that site managers could check more efficiently by scanning with their smart phone when they inspect equipment. Moreover, by the construction interested who didn't know what and how they have to inspect could point out unsafe condition in the early stage of equipment entering or take unsafe one out of the site by using new smart phone safety checking system is installed, it became possible that critical accident caused by construction equipment was prevented in advance.

Keywords

References

  1. Korea occupational safety and health agency (2010) "Industrial accident statistics"
  2. Korea institute of construction engineering and management (2004) "construction equipment utilization improvement for effective enhancement of construction production, pp 52-54
  3. Duk-Hoon Jeong (2011) "A Study on the framework Construction of Disaster Monitorring and Transmitting System based on Smart-Phone" journal of the Korea safety Management & Science,pp 31-41
  4. Zong-Shi Li(2008)"A Study on Air Logistics Process Simplification based on RFID(2)" journal of the Korea safety Management & Science, pp 173-179
  5. Korea occupational safety and health agency (2010)" Analysis of construction equipment accident status"
  6. Young-Tae Kim(2011)"Fundamental safety securing of high place work platform"
  7. Kang-Yeol Lee(2009) "A Study on the Optimization of Hoist-System Planning in Highrise Building Construction"Ulsan University Master's thesis, pp 81-89
  8. Yong-Tak Gang (2010) "The Study on the Accidents analysis and preventive measures from a excavator"Journal of the Korea safety Management & Science
  9. Tae-Kun Kim(2010)"A Study on the Management model of building constructions using smart phone Technology " Chungju University Master's thesis, pp 1-8
  10. Safety-News(2007)" becoming larger-scale of industry and becoming higher of buildings causes drastic increase of demand, expansion in area of lifting equipment and increase of exposure to accidents"
  11. Jong-Ho Park(2010) "Safety management using smartphone"
  12. Eui-Jun Kim(2010) "Suggestion of Safety Management Smartphone Application based on PMIS"Architectural Institute of Korea thesis, pp 343-344
  13. Dong-Chun kim(2012) "2012 Policy orientation of construction safety"
  14. Ho-Seob Shim(2011) " A Study on ware house management system " Myongji University Doctoral dissertation,pp 45-50
  15. Tok-Kwang Kim(2011), "A Study on Risk Assesment of Lifting Equipments Using in the High-rise Building Construction Work" Seoul National University Master's thesis pp 16-25