DOI QR코드

DOI QR Code

Vulnerability Assessment Procedure for the Warship Including the Effect of Shotline and Penetration of Fragments

탄두의 관통 효과를 고려한 함정 취약성 평가 절차에 관한 기본 연구

  • Kim, Kwang-Sik (Department of Naval Architecture and Ocean Engineering College of Engineering, Graduate school, INHA University) ;
  • Lee, Jang-Hyun (Department of Naval Architecture and Ocean Engineering College of Engineering, INHA University)
  • 김광식 (인하대학교 대학원 조선해양공학과) ;
  • 이장현 (인하대학교 조선해양공학과)
  • Received : 2011.09.21
  • Accepted : 2012.05.23
  • Published : 2012.06.20

Abstract

The survivability of warship is assessed by susceptibility, vulnerability and recoverability. Essentially, a vulnerability assessment is a measure of the effectiveness of a warship to resist hostile weapon effects. Considering the shot line and its penetration effect on the warship, present study introduces the procedural aspects of vulnerability assessments of warship. Present study also considers the prediction of penetration damage to a target caused by the impact of projectiles. It reflects the interaction between the weapon and the target from a perspective of vulnerable area method and COVART model. The shotline and tracing calculation have been directly integrated into the vulnerability assessment method based on the penetration equation empirically obtained. A simplified geometric description of the desired target and specification of a threat type is incorporated with the penetration effect. This study describes how to expand the vulnerable area assessment method to the penetration effect. Finally, an example shows that the proposed method can provide the vulnerability parameters of the warship or its component under threat being hit through tracing the shotline path thereby enabling the vulnerability calculation. In addition, the proposed procedure enabling the calculation of the component's multi-hit vulnerability introduces a propulsion system in dealing with redundant Non-overlapping components.

Keywords

References

  1. ASTM (American Society for Testing and Materials), 1999. Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio by Impulse Excitation of Vibration, E1876-99. Avaliable at: http://www.astm.org [Accessed 20 August 2011].
  2. Ball, R.E., 1985. The Fundamentals of Aircraft Combat Survivability Analysis and Design. AIAA education series: New York.
  3. Ball, R.E., 2003. The Fundamentals of Aircraft Combat Survivability Analysis and Design. 2ndEd. AIAA education series: Virginia.
  4. Ball, R.E. & Calvano, C.N., 1994. Establishing the Fundamentals of a Surface Ship Survivability Design Discipline. Naval Engineers Journal, 106(1), pp.71-74.
  5. Bloom, J.B. Reese, R.M. & Hopkins, T.M., 1994. Live Fire Test and Evaluation for Ships. Naval Engineers Journal, 106(3), pp.228-245. https://doi.org/10.1111/j.1559-3584.1994.tb02855.x
  6. Chung, J.H. & Kwon, J.I., 2008a. Survivability Analysis of A Naval Ship Using the MOTISS Program-(1): Theoretical Background. Proceedings of the Annual Autumn Meeting of Society of Naval Architects of Korea, Changwon, Republic of Korea, November 2008, pp.330-339.
  7. Chung, J.H. & Kwon, J.I., 2008b. Survivability Analysis of A Naval Ship Using the MOTISS Program-(2): A Numerical Example. Proceedings of the Annual Autumn Meeting of Society of Naval Architects of Korea, Changwon, Republic of Korea, November 2008, pp.340-348.
  8. David, L. Robert, W.K. & Stephanie, S.J., 1997. An Analysis comparison Using the Vulnerability Analysis for Surface Target(VAST) Computer Code and the Computation of Vulnerable Area and Repair Time (COVARTIII) Computer Code, Army Research Laboratory, ARL-MR-341.
  9. Driels, M., 2004. Weaponeering: Conventional weapon System Effectiveness. AIAA education series: Virginia.
  10. Friedman, N., 2006. World Naval Weapon Systems. 5th Ed. The U.S. Naval Institute.
  11. FAA(The Federal Aviation Administration), 2005. Advanced Aircraft Materials, Engine Debris Penetration Testing. Virginia: NTIS.
  12. Graswald, M. Brown, R.E. Sinibaldi, J.O. Nolte, T. & Rothe, H., 2010. Vulnerability of Mortar Projectiles by Intercepting Fragmentation Warheads. Journal of Applied Mechanics, 77(5), pp.051804-1, 051804-8. https://doi.org/10.1115/1.4001713
  13. Gama, B.A. & Gillespie, J.J.W., 2011. Finite element modeling of impact, damage evolution and penetration of thick-section composites. International Journal of Impact Engineering, 38(4), pp.181-197. https://doi.org/10.1016/j.ijimpeng.2010.11.001
  14. ITT Corporation, 2010. COVART 6.1: FASTGEN Legacy Mode User's Manual, Joint Aircraft Survivability Program, Report JASPO-M-07-03-030.
  15. JTCG (Joint Technical Coordinating Group on Aircraft Survivability), 2001. Survivability models and simulations. Aerospace systems survivability handbook series-Volume 5. JTCG/AS-01-D007.
  16. JTCG/ME, 1985. Penetration Equations Handbook for Kinetic-Energy Penetrators(U). Joint Technical Coordinating Group for Munitions Effectiveness (Anti-Air). 61 JTCG/ME-77-16, Revision 1-15.
  17. Kim, K.S. Lee, J.H. & Hwang, S.Y., 2011. Simplified vulnerability assessment procedure for the warship based on the vulnerable area approach. Journal of the Society of Naval Architects of Korea, 48(5), pp.404-413. https://doi.org/10.3744/SNAK.2011.48.5.404
  18. Lee, S.G. Kwon, J.I. & Chung, J.H., 2007. Integrated Structural Dynamic Response Analysis considering the UNDEX Shock Wave and Gas Bubble Pulse. Journal of the Society of Naval Architects of Korea, 44(2), pp.148-153. https://doi.org/10.3744/SNAK.2007.44.2.148
  19. Lillis, J.A., 2002. Analysis of the applicability of aircraft vulnerability assessment and reduction techniques to small surface craft. Master's Thesis. Monterey, California: Naval Postgraduate School.
  20. Lynch, D.D. Kunkel, R.W. & Juarascio, S.S., 1997. An Analysis Comparison Using the Vulnerability Analysis for Surface Target(VAST) Computer Code and the computation of Vulnerable Area and Repair Time(COVARTIII) Computer Code, U.S. Army Research Laboratory. ARL-MR-341.
  21. Pei, Y. Song, B. & Han, Q., 2009. Shot Line Geometric Description Method for Aircraft Vulnerability Calculation. Chinese Journal of Aeronautics, 22(5), pp.498-504. https://doi.org/10.1016/S1000-9361(08)60132-6
  22. Pei, Y. Song, B. & Han, Q., 2006. A Generic Calculation Model for Aircraft Single-hit Vulnerability Assessment Based on Equivalent Target. Chinese Journal of Aeronautics, 19(30), pp.183-189. https://doi.org/10.1016/S1000-9361(11)60343-9
  23. Pugh, R., 2010. A Rapid Maritime Concept Vulnerability Analysis Tool. Avaliable at: http://qinetiq.com.au/home/defence/defence_solutions/sea/survive/conferences.Par.7579.File.pdf [Accessed 20 August 2011].
  24. SURVIAC (Survivability/Vulnerability Information Analysis Center). FASTGEN 4. Avaliable at: http://www.bahdayton.com/surviac/fastgen.htm [Accessed 20 August 2011].
  25. U.S. Department of Transportation Federal Aviation Administration, 2005. Advanced Aircraft Materials, Engine Debris Penetration Testing, DOT/FAA/AR-03/37, Office of Aviation Research and Development Washington, D.C.
  26. Xu, L. Tang, L.C. Ho, S.L. & Zhu, M.L., 2002. Fuzzy assessment of FMEA for engine systems. Reliability Engineering and System Safety, 75, pp.17-29. https://doi.org/10.1016/S0951-8320(01)00101-6

Cited by

  1. Integrated survivability assessment given multiple penetration hits vol.28, pp.1, 2014, https://doi.org/10.5574/KSOE.2014.28.1.069
  2. Vulnerability Assessment for a Complex Structure Using Vibration Response Induced by Impact Load vol.38, pp.10, 2014, https://doi.org/10.3795/KSME-A.2014.38.10.1125
  3. The vulnerability assessment of ground combat vehicles using target functional modeling and FTA vol.17, pp.5, 2016, https://doi.org/10.1007/s12541-016-0079-8