References
- CATIA, V5 R17, CATIA Document, Dassault Systemes Inc.
- Deform-3D, 2010, Deform-3D Tutorial, SFTC Inc.
- Kwon, H. H., J., Song, S. E., and Kim, O. S., 2011, "Cold Forging Process Finite Element Analysis of the Unified Universal Shaft Joint for the Automobile," J. of the KSMTE, Vol. 20, No. 5, pp. 582-588.
- Eesy-2-Form, Vers. 4.20, Eesy-DieOpt Document, CPM Inc.
- Kwon, H. H., Moon, K. J., and Song, S. E., 2010, "Forging Process Analysis of the Multi-Forging Die for the Unified Universal Pipe Joint of the Intermediate Shaft," J. of the KSMTE., Vol. 19, No. 1, pp. 33-41.
- Kwon, H. H., and Lee, B. K., 2005, "Process Analysis and Die Design for the Automobile Part Development by the Precise Cold Forging," Proc. of the KSMTE autumn conf., pp. 109-114.
- Kwon, H. H., Lee, B. K., and Cho, H. Y., 2002, "A Study on the Automated Process Planning System for Cold Forging of Non-Axisymmetric Parts using FVM Simulation," J. of Material Processing Technology, Vol. 130-131, pp. 524-531. https://doi.org/10.1016/S0924-0136(02)00799-9
- Kwon, H. H., and Lee, B. K., 2005, "Development of the Automobile Part for the Engine Oil Leakage Prevention by the Precise Cold Forging," J. of the KSTP, Vol. 14, No. 8, pp. 675-680.
- Lee, S. D., and Byon, S. K., 2005, "Design of the Radial Extrusion Process for the General-Pur Pose Flange Using Model Material," J. of the KSMTE., Vol. 17, No. 2, pp. 114-120.
- Kwon, H. H., Lee, W. B., and Lee, S. J., 2004, "Development of Shaft Spur Gear for Start Motor using Cold Forging," J. of KASBIR., Vol. 4. No. 4, pp. 103-108.
Cited by
- Integration Forming Technology based on Cold Hot Forging of Clutch Jaw Parts for Farm Machinery vol.24, pp.5, 2015, https://doi.org/10.7735/ksmte.2015.24.5.489
- Development of LPI Vehicle Fuel Filter Housing vol.15, pp.2, 2014, https://doi.org/10.5762/KAIS.2014.15.2.653
- Design of eccentric forging process for camber bolts using finite element method vol.40, pp.4, 2016, https://doi.org/10.5916/jkosme.2016.40.4.320
- Development of automobile engine mounting parts using hot-cold complex forging technology vol.3, pp.2, 2016, https://doi.org/10.1007/s40684-016-0023-5
- Development of Cam Ring Gear Parts of Large Diameter for Truck Clutch Using Hot-Cold Complex Forging Technology of Small Bar vol.20, pp.5, 2012, https://doi.org/10.1007/s12541-019-00100-5