한국소음진동공학회논문집 (Transactions of the Korean Society for Noise and Vibration Engineering)

  • 제22권6호
  • /
  • Pages.582-587
  • /
  • 2012
  • /
  • 1598-2785(pISSN)
  • /
  • 2287-5476(eISSN)
한국소음진동공학회 (The Korean Society for Noise and Vibration Engineering)
권호 표지
DOI QR코드

DOI QR Code

자동차용 중공 구동축의 진동감쇠제어 연구

A Study of Vibration Damping Control for Hollow Drive Shaft

  • 투고 : 2012.05.18
  • 심사 : 2012.06.07
  • 발행 : 2012.06.20
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

This paper presents a solution of the vibration reduction in the hollow shafts by using magentorehological( MR) elastomer. Proposed active damping structure is built by embedding the MR elastomers whose elastic modulus is controllable by an applied magnetic field. MR elastomers consist of synthetic rubber filled with micron-sized magnetizable particles. For reduction of vibration, dynamic damper of hollow shaft is designed by using MR elastomer and equipped in the hollow shaft for the application to drive shaft. Experiment results are shown through the experiments to confirm the effect of MR elastomer dynamic damper for vibration reduction. Thus, the designed damping structure can be applied to vibration absorber used in drive shafts as well as the propeller shafts.

키워드

참고문헌

  1. Lee, C. H., Park, C. W. and Jung, S. C., 2000, A Study of NVH Phenomena in SUV Drivetrain Caused by Propelled Shaft, Journal of Society Automotive Engineering, p. 17.
  2. Hong, Y., Kim, H. S., Hong, D. P., 2009, A Study on Characteristics According to the Parameter Variation for Hybrid Shaft Design, Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 19, No. 3, pp. 274-281. https://doi.org/10.5050/KSNVN.2009.19.3.274
  3. Sini, R., Baranger, T. N., Chatelet, E. and Jacquet, G., 2008, Dynamic Analysis of Rotating Composite Shaft, Composites Science and Technology.
  4. Carlson, J. D., 1991, US Patent 5054593.
  5. Gentry, S. B., Mazur, J. F. and Blackburn, B. K., 1995, US Patent 5460585.
  6. Dyke, S. J., Spencer, B. F., Sain, M. K. and Carlson, J. D., 1998, An Experimental Study of MR Dampers for Seismic Protection, Smart. Mater. Struct., Vol. 7, pp. 693-703. https://doi.org/10.1088/0964-1726/7/5/012
  7. Hoang, N., Zhang, N. and Du, H., 2009, A Dynamic Absorber with a Soft Magneto-rheological Elastomer for Powertrain Vibration Suppression, Smart. Mater. Struct., 18.
  8. Du, H., Li, W. and Zhang, N., 2011, Semi-active Variable Stiffness Vibration Control of Vehicle Seat Suspension Using an MR Elastomer Isolator, Smart. Mater. Struct., 20.
  9. Li, W., Kostidis, K., Zhang, X. and Zhou, Y., 2009, Development of a Force Sensor Working with MR Elastomers, International Conference on Advanced Intelligent Mechatronics.
  10. Carlson, J. D. and Weiss, K. D., 1995, US Patent 5382373.
  11. Deng, H. and Gong, X., 2008, Application of Magneto-rheological Elastomer to Vibration Absorber, Communications in Nonlinear Science and Numerical Simulation, Vol. 13, pp. 1938-1947. https://doi.org/10.1016/j.cnsns.2007.03.024
  12. Harris, C. M., 1997, Shock and Vibration Handbook, McGraw-Hill, New York City.
  13. Hill, S. J. and Tipperm, T. A., 1992, Universal Joints and Driveshafts, Springer, New York City.
  14. Park, J. H., Lee, C. H., Kim, C. H. and Cho, W. O., 2011, A Study of Vibration Characteristics of MR Elastomers Based on Silicon, Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 21, No. 8, pp. 714-719. https://doi.org/10.5050/KSNVE.2011.21.8.714
  15. Kim, T. J., Kim, B. J., Kim, S. O., Min, J. H. and Chung, J. T., 2012, Dynamic Analysis of a Washing Machine Using a Multi-body Dynamic Model, Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 22, No. 1, pp. 88-93. https://doi.org/10.5050/KSNVE.2012.22.1.088
  16. Jeon, J. C., Sohn, J. W. and Choi, S. B., 2011, Vibration Control of Stiffeded Hull Structure Using MFC Actuator, Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 21, No. 7, pp. 643-649. https://doi.org/10.5050/KSNVE.2011.21.7.643