Estimation of Spatial Soil Distribution Changed by Debris Flow using Airborne Lidar Data and the Topography Restoration Method

항공 Lidar 자료와 지형복원기법을 이용한 토석류 토사변화 공간분포 추정

  • Woo, Choongshik (Division Forest Disaster Management, Korea Forest Research Institute) ;
  • Youn, Hojoong (Division Forest Disaster Management, Korea Forest Research Institute) ;
  • Lee, Changwoo (Division Forest Disaster Management, Korea Forest Research Institute) ;
  • Lee, Kyusung (Department of Geoinformatic Engineering, Inha University)
  • 우충식 (국립산림과학원 산림방재연구과) ;
  • 윤호중 (국립산림과학원 산림방재연구과) ;
  • 이창우 (국립산림과학원 산림방재연구과) ;
  • 이규성 (인하대학교 지리정보공학과)
  • Published : 2012.03.31

Abstract

The flowed soil volume is able to be estimated simply from topographic data of before and after the debris flow. However, it is often difficult to obtain high resolution topographic data before debris flow because debris flow was occurred in mountainous area and airborne Lidar data was mainly surveyed in urban area. For this reason, Woo(2011) developed the topographic restoration method that can reconstruct the topography before the debris flow using airborne Lidar data. In this study, we applied the topographic restoration method on Inje county, Bongwha county and Jecheon city, produced topography data before debris flow that RMSE is from 0.16 to 0.34 m. Also, a soil variation was analyzed by topography data before and after debris flow, and it was used to estimate a real soil volume flowed to downstream and a spatial distribution showing collapses, flows, sedimentations appeared to debris flow.

토석류 발생으로 유출된 토사량은 발생 전 후의 항공 Lidar 지형자료의 차이로부터 간단히 추정할 수 있지만, 토석류는 산지에서 발생하고 항공 Lidar 자료는 주로 도시지역에 집중되어있어 토석류의 발생이전 정밀지형자료를 이용하는 것은 어렵다. 이러한 이유로 우충식(2011)은 토석류 발생이후 촬영된 항공 Lidar 자료를 이용하여 토석류 발생이전의 지형을 추정할 수 있는 지형복원기법을 개발하였다. 본 연구에서는 토석류 발생지역인 인제, 봉화, 제천지역에 지형복원기법을 적용하여 RMSE가 0.16~0.34 m인 토석류 발생전 지형자료를 제작하였다. 또한 토석류 발생 전 후의 토사변화량을 분석하였고, 토석류 유동시 나타나는 침식, 유하, 퇴적작용의 공간분포와 하류에 실제 유출된 토사량을 추정하였다.

Keywords

References

  1. 산림청. 2010. 산림과 임업동향에 관한 연차보고서.
  2. 우충식, 윤호중, 정용호, 2007. 산지토사재해 발생구간 분석을 위한 항공사진 DTM에서의 수목필터링, 한국지리정보학회지, 10(3): 22-30.
  3. 우충식, 윤호중, 이창우, 정용호. 2008. 항공사진을 이용한 산지토사재해 영향인자 분석 -강원도 평창군을 중심으로-, 한국환경복원녹화기술학회지, 11(1): 14-22.
  4. 우충식. 2011. 항공 Lidar 자료를 이용한 토석류 발생지역의 지형복원기법 개발. 인하대 박사학위논문.
  5. 윤호중, 이창우, 우충식, 정용호, 이천용. 2009. 토석류 발생특성과 피해규모 예측기법 개발, 국립산림과학원.
  6. 한학용, 2005. 패턴인식개론, 한빛미디어, 9장.
  7. Armento, M.C., Rinaldo, G. and Pia, R.T. 2008. Comparison of numerical models of two debris flows in the Cortina d' Ampezzo area, Dolomites, Italy, Landslides 5: 143-150. https://doi.org/10.1007/s10346-007-0111-2
  8. Imamura, R. and Sugita, M. 1980. Study on Simulation of Debris Depositing Based on a Random Walk Model. Journal of the Japan Society of Erosion Control Engineering 32: 17-26.
  9. Matsuoka, A., Yamakoshi, T., Tamura, K., Nagai, Y., Maruyama, J., Kotake, T. Ogawa, K. and Tagata, S. 2009. Sediment dynamics in the mountainous watersheds based on differentiation of multi-temporal LiDAR survey data sets. Journal of the Japan Society of Erosion Control Engineering 62: 60-65.
  10. O'Brien, J.s., Julien, P.Y. and Fullerton, W.T. 1993. Two dimensional water flood and mudflow simulation. Journal of Hydraulic Engineering 119: 244-259. https://doi.org/10.1061/(ASCE)0733-9429(1993)119:2(244)
  11. Stolz, A. and Huggel C. 2008. Debris flows in the Swiss National Park : the influence of different flow models and varying DEM grid size on modeling results. Landslides 5: 311-319. https://doi.org/10.1007/s10346-008-0125-4
  12. Zeverbergen, L.W. and Thorne, C.R. 1987. Quantitative Analysis of Land Surface Topography, Earth Surface Processes and Landforms 12: 47-56. https://doi.org/10.1002/esp.3290120107