Journal of the Korean Society of Manufacturing Process Engineers (한국기계가공학회지)

The Korean Society of Manufacturing Process Engineers (한국기계가공학회)
권호 표지

A Study on the High Speed Machining of Major Structure in Aircraft

항공기 대형구조물의 고속가공에 관한 연구

  • 이우명 (한국항공우주산업(주) 개발본부) ;
  • 김남경 (경남과학기술대학교 자동차공학과) ;
  • 김해지 (경남과학기술대학교 자동차공학과) ;
  • 장정환 (경상대학교 기계항공공학부) ;
  • (주)Yulkok ((주)Yulkok)
  • Published : 2012.02.29
⟨ Previous Next ⟩

Abstract

The study on high speed machining was conducted for wing and rib parts of major structure in aircraft in order to investigate a optimal cutting condition and machining method using a high speed machine with 33,000rpm. Preliminary tests, such as high speed cutter test and spindle vibration test of high speed machine, were performed and the high speed machining was conducted in 3times after the preliminary test results were applied to a NC program for manufacturing.

Keywords

References

  1. Lee U. M., Kim N. K., Kim H. J. and Lee I. S., "A Study on Machining deformation of Major Structure in Aircraft", KSMPE Fall Conference 2009, pp. 17-19, 2009.
  2. Lee J. C., "High Speed Machining", KSMTE Spring Conference 1998, pp. 5-10, 1998.
  3. Yang M. Y., "Optimization of Cutting Tool for High Speed Machining", KSME, Vol. 12, No. 6, pp. 1290-1295, 1988.
  4. Lee S. J. etc., "Temperature Measurement Characteristics of High-Speed Machining", KSMPE Spring Conference 2006, pp. 263-268, 2006.
  5. Kang M. C., Kim J. S. etc, "Study on the Tool Holding System for High Speed Machining of the Deep Pocket", Journal of the Korean Society of Manufacturing Technology, Vol. 1, No. 1, pp. 38-47, 2002.
  6. Bae J. C., Jung Y. S. etc, "Measuring system for condition monitoring in high spee machining", KSMPE Spring Conference 2003, pp. 253-257, 2003.
  7. Choi S. C., Kim Y. W., Lee S. J. and Lee D. W., "Development of High Speed Precision Air Spindle for Machining High Brittle Material", KSMPE Spring Conference 2009, pp. 213-215, 2009.
  8. G. S. Hwang etc., "Development of High Speed machine and Machining Technology", Korea Institute of Machinery & Materials, pp. 45, 1994.
  9. U. M. Lee, "A Study on Machining of Major Structure in Aircraft", Graduate School of Indusry, Gyeongnam National University of Science and Technology, Master's degree paper, pp. 14, 2011.