초록
Purpose: Cellulose acetate (CA) was blended with polyethyleneglycol (PEG) having different molecular weight at various mixing conditions to enhance melt-processibility of CA, which might prevent the harmful effect resulted from the introduction of phthalic plasticizer. Methods: To establish optimal plasticizing conditions, CA/PEG blends were examined under various plasticizing conditions: PEG concentration, molecular weight of PEG, and plasticzing temperature. Mechanical properties of the CA/PEG blends, as well as migration and exudation of the PEG, were performed in order to evaluate the efficiency of plasticization. Results: Compared to industrial CA resin plasticized by diethyl phthalate, CA/PEG blends exhibited similar thermal plasticization. It was established that the optimum condition was to blend 30~40 phr PEG with molecular weight 400 at $175{\sim}180^{\circ}C$. CA/PEG blend showed superior glassness, PEG stability, and mechanical properties. Conclusions: CA/PEG blends would be a eco-friendly glasses frame to substitute traditional CA glasses frame prepared phthalate plasticizers.
목적: 본 연구는 cellulose acetate(CA)의 용융특성을 증가시키기 위해 polyethyleneglycol(PEG)를 도입함으로써 기존에 사용되는 환경유해성 가소제의 사용 없이 열가공성이 향상 된 CA/PEG 조성물을 제조하는데 목적이 있다. 방법: CA의 최적 가소화 조건을 확립하기 위해 PEG 분자량, 농도, 및 혼입온도를 제어하여 CA/PEG 조성물의 가소화 성능을 확인하였으며, CA와 PEG간의 혼화성을 확인하기 위해 제조된 조성물의 열분석 및 표면분석을 실시하였다. 또한 기존 상용 CA 레진과의 가소제 용출특성, 기계적 물성 및 광학적 특성들의 비교분석을 통해 가소제에 의한 물성차이를 검토하였다. 결과: PEG의 도입을 통해 기존 상용 CA 레진과 유사한 가소화 성능을 확인하였으며, 최적의 가소화 조건은 PEG분자량 400, PEG 함량 30~40 phr, 가소화온도 $175{\sim}180^{\circ}C$에서 우수한 용융특성을 나타냄을 확인 하였다. 또한 기존의 CA 안경테 소재와 비교 시 우수한 광택특성 및 안정성을 확인 하였으며, 동등수준 이상의 기계적 물성을 보임을 확인 하였다. 결론: CA/PEG 조성물은 환경 친화적 안경테 소재로써 기존 프탈레이트계 가소제를 사용한 CA 안경테 소재를 대체할 수 있을 것으로 판단된다.