한국컴퓨터정보학회논문지 (Journal of the Korea Society of Computer and Information)

  • 제17권5호
  • /
  • Pages.137-146
  • /
  • 2012
  • /
  • 1598-849X(pISSN)
  • /
  • 2383-9945(eISSN)
한국컴퓨터정보학회 (Korean Society of Computer Information)
권호 표지
DOI QR코드

DOI QR Code

물류활동에서 RFID와 바코드 시스템의 효용성 비교를 위한 통계분석 도구(RUSAT) 개발

The Development of RFID Utility Statistical Analysis Tool (RUSAT) in Comparison to Barcode for Logistics Activities

  • 하헌철 (한국외국어대학교 통계학과) ;
  • 박흥선 (한국외국어대학교 통계학과) ;
  • 김현수 (경기대학교 산업경영공학과) ;
  • 최용정 (한미IT 전략기획팀)
  • Ha, Heon-Cheol (Dept. of Statistics, Hankuk University of Foreign Studies) ;
  • Park, Heung-Sun (Dept. of Statistics, Hankuk University of Foreign Studies) ;
  • Kim, Hyun-Soo (Dept. of Industrial and Management Engineering, Kyonggi University) ;
  • Choi, Yong-Jung (Strategy Planning Team, HanmiIT)
  • 투고 : 2012.02.09
  • 심사 : 2012.03.09
  • 발행 : 2012.05.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

공급사슬망(Supply Chain Management: SCM)은 비용을 최소화시키고, 불확실성을 줄이며 전체적인 최적화 과정을 통해 고객만족을 달성하려는 일종의 경영 패러다임이다. 이는 모든 거래 파트너들 사이의 원료, 부품뿐만 아니라 정보, 자금, 지식의 흐름을 통합적으로 관리운영하기 때문에 SCM의 RFID 도입은 전체 SCM의 효율성을 증가시킬 수 있을 것으로 기대되고 있다. 하지만 불확실한 환경 하에서 객관적인 분석 없이 RFID 시스템 도입여부를 판단하는 의사결정과정에는 한계가 있고 리스크도 크다. 따라서 본 연구는 RFID 시스템의 유효성을 바코드와 비교하고자 할 때 사용될 수 있는 통계적인 분석 모형들을 제시하고 있으며, 비전문 통계인도 이를 쉽게 사용하여 자료를 입력 및 분석할 수 있는 RUSAT(RFID Utility Statistical Analysis Tool)라는 분석 도구를 개발하였다. 본 연구에서 개발된 RUSAT는 향후 RFID 시스템을 도입하고자 하는 기업들에게 효과적인 의사결정 도구로써 널리 활용되기를 기대한다.

In SCM(Supply Chain Management), a management paradigm where the customer satisfaction is to be achieved by minimizing the cost, reducing the uncertainty, and obtaining the overall optimization. As it performs the integrated operation of the paths of information, assets, and knowledge from the raw material providers to the retailers, the adoption of RFID(Radio Frequency Identification) in SCM could be expected to magnify the effectiveness of the system. However, there is a huge risk by deciding whether or not RFID system is adopted without the objective analysis under the uncertain circumstances. This research paper presents the statistical analysis methodologies for the comparison of RFID with Barcode on the aspect of utility and the statistical analysis tool, RUSAT, which was programmed for nonstatisticians' convenience. Assuming a pharmaceutical industry, this paper illustrates how the data were entered and analyzed in RUSAT. The results of this research are expected to be used not only for the pharmaceutical related company but also for the manufacturer, the whole-saler, and the retailer in the other logistic industries.

키워드

참고문헌

  1. S.Y. Lee, "Design and Implementation of RFID-based Tracking System for Logistics Management on the Steel Industry", Journal of the Korea Society of Computer and Information, Vol. 15, No. 10, 157-164, October 2010. https://doi.org/10.9708/jksci.2010.15.10.157
  2. H.W. Choi, D.G. Yeo, J.H. Jang, H.Y. Youm, "A Secure and Efficient RFID Tag Search Protocol Protecting Mobile Reader's Privacy", Journal of the Korea Society of Computer and Information, Vol. 15, No. 9, 109-117, September 2010. https://doi.org/10.9708/jksci.2010.15.9.109
  3. S.H. Jang, Y.B. Ma, C.H. Noh, Y.J. Park, K.H. Kim, H.S. Cha, J.S. Lee, J.M. Kim, "Design and Implementation of RFID-based Airway Logistics System for Ubiquitous Environments", Journal of the Korea Society of Computer and Information, Vol. 12, No. 6, 297-306, December 2007.
  4. S.H. Lim, "Role of Trust, Fits, and Risk on the Intention towards RFID Acceptance : Focused on Logistics and Retail Sectors", Korea Logistics Review, Vol. 21, No. 2, 5-40, September 2011.
  5. IDTechEx, RFID Forecasts, Players and Opportunities 2011-2021, http://www.idtechex.com.
  6. Y.J. Park, M.H. RIM, G.J. Kim, "An Analysis on the Market Trends and Demand of the RFID/USN Services", Trend Analysis of Telecommunication, Vol. 24, No. 2, 32-42, April 2009.
  7. Korea Association of RFID/USN Convergence(Karus), 2011 CJK RFID Industry Development Report, 2011.
  8. National IT Industry Promotion Agency(NIPA), Domestic and Foreign RFID/USN Industrial Trend Report Through the First Half of 2011, 2011.
  9. J.H. Jeong, Y.H. Lee, "Development of a Process Centered RFID Cost-Benefit Analysis Model and Tool", Journal of Society for e-Business Studies, Vol. 13, No. 3, 173-188, 2008.
  10. S.K. Youm, Y.H. Lee, H.T. Kim, J.T. Rhee, S.K. Cho, "A Methodological Model for Effective RFID System Development", Journal of the Korean Institute of Industrial Engineers, Vol. 34, No. 4, 433-444, December 2008.
  11. H.J. Jeong, D.H. Han, T.W. Chang, H.S. Kim, "Framework for ROI Analysis of RFID System: Focused on Manufacturing Industry", Korean Journal of Logistics, Vol. 18, No. 1, 103-120, 2010. https://doi.org/10.15735/kls.2010.18.1.006
  12. Y.J. Choi, D.H. Han, H.J. Jeong, W.C. Han, H.S. Kim, "The Evaluation of Effectiveness on RFID system based Logistics process", Journal of the Korea Society of Computer and Information, Vol. 15, No. 6, 111-120, June 2010. https://doi.org/10.9708/jksci.2010.15.6.111
  13. R.A. Lancioni, M.F. Smith, and T.A. Oliva, "The Role of the Internet in Supply Chain Management", Industrial Marketing Management, Vol. 29, 45-66, Elsevier Science Inc., 2000. https://doi.org/10.1016/S0019-8501(99)00111-X
  14. G.R.T. White, G. Gardiner, G. Prabhakar, and A.A. Razak, "A Comparison of Barcoding and RFID Technologies in Practice", Journal of Information, Information Technology, and Organizations, Vol. 2, 119-132, 2007. https://doi.org/10.28945/142
  15. Y.G. Ampatzidis and S.G. Vougioukas, "Field Experiments for Evaluating the Incorportation of RFID and Barcode Registration and Digital Weighting Technologies in Manual Fruit Harvesting", Computers and Electronics in Agriculture, Vol. 66, 166-172, 2009. https://doi.org/10.1016/j.compag.2009.01.008
  16. M.D. McCullough and D.A. Heiser, "On the accuracy of statistical procedures in Microsoft Excel 2007", Computational Statistics & Data Analysis, Vol. 52, No. 10, 4570-4578, 2008. https://doi.org/10.1016/j.csda.2008.03.004
  17. Y. Sua, "It's easy to produce chartjunk using Microsoft Excel 2007 but hard to make good graphs", Computational Statistics & Data Analysis, Vol. 52, No. 10, 4594-4601, 2008. https://doi.org/10.1016/j.csda.2008.03.007
  18. J. Cryer, "Problems using Microsoft Excel for Statistics", Proceedings of the Joint Statistical Meetings, 2002.
  19. R for Windows FAQ, http://cran.r-project.org/bin/windows/rw-FAQ.html
  20. R.M. Heiberger and E. Neuwirth, "R through Excel: A Spreadsheet for Statistics, Data Analysis, and Graphics", Springer, 2009
  21. statconn (2011), http://statconn.com/products.html
  22. IBM, "EPC: A Shared Vision for Transforming Business Processes", IBM Business Consulting Services Analysis, 2005.
  23. M. Bertrand, Duflo, E. and S. Mullainathan, "How much should we trust difference-in-differences estimates", Quarterly Journal of Economics, 249-275, 2004.
  24. J. Snow, "On the Mode of Communication of Cholera", 2nd ed. London, John Churchil, 1855.
  25. M.L. Obenauer and B.M. Nienburg, "Effect of minimum-wage determinations in Oregon", 1915.
  26. A.N. Pettitt, "Testing the Normality of Several Independent Samples using the Anderson-Darling Statistic", Annals of Statistics, Vol. 26, No. 2, 156-161, 1977.

피인용 문헌

  1. Implementation of Truck and Dock Management System for Manufacturers and Couriers using RF-ID vol.26, pp.1, 2012, https://doi.org/10.9708/jksci.2021.26.01.119