Journal of international Conference on Electrical Machines and Systems

Journal of International Conference on Electrical Machines and Systems (대한전기학회 분과)
권호 표지
DOI QR코드

DOI QR Code

Flux Position Estimation Method of IPMSM by Controlling Current Derivative at Zero Voltage Vector

  • Hosogaya, Yuji (Graduate School of Science and Technology, Meiji University) ;
  • Kubota, Hisao (Graduate School of Science and Technology, Meiji University)
  • Received : 2011.07.04
  • Accepted : 2011.11.27
  • Published : 2012.03.01
Download PDF
⟨ Previous Next ⟩

Abstract

Various methods have been proposed to identify the flux position in an interior permanent magnet synchronous motor (IPMSM) without the use of mechanical sensors. To achieve this, a method that uses both the back electromotive force (EMF) and the saliency to identify the flux position in the IPMSM without the injection of high-frequency components at low speeds has been reported. This method was then extended in order to drive the motor with no load to a light load. We propose a combination of these methods with different proportional-integral (PI) controllers for controlling $di_{dest}$/dt and $di_{qest}$/dt. We also introduce compensation values $F_L$ and $F_H$ to reduce the position error when the estimation rule is being selected.

Keywords

References

  1. T. M. Jahns, G. B. Kliman, and T. W. Newmann, "Interior Permanent Magnet Synchronous Motors for Adjustable- Speed Drives," IEEE Trans. Ind. Appl., vol. IA-22, no. 4, pp. 738-747, Jul./Aug. 1986. https://doi.org/10.1109/TIA.1986.4504786
  2. S. Morimoto, Y. Takeda, and T. Hirasa, "Current Phase Control Methods for Permanent Magnet Synchronous Motors," IEEE Trans. Power Electron., vol. 5, no. 2, pp. 133- 139, Apr. 1990. https://doi.org/10.1109/63.53150
  3. S. Morimoto, M. Sanada, and Y. Takeda, "Wide Speed Operation of Interior Permanent Magnet Synchronous Motors with High Performance Current Regulator," IEEE Trans. Ind. Appl., vol. 30, no. 4, pp. 920-926, Jul./Aug. 1994. https://doi.org/10.1109/28.297908
  4. Y. Iwaji, Y. Yamamoto, and H. Sugimoto, "Trends of Drive Circuit for Permanent Magnet Synchronous Motors," in Proceedings of the 2004 Japan Industry Applications Society Conference (JIASC2004), no. 1-S152, pp. I(95) - I(106), 2004. (in Japanese)
  5. T. Fukumoto, N. Kitano, and K. Ohyama, "Technical Trends of AC Motor Drive Systems in Home Appliance," in Proceedings of the 2005 Annual Meeting Record IEE Japan, vol. 4, no. 4-S17-5, pp. S17(18) - S17(23), 2005. (in Japanese)
  6. T. Noguchi, M. Ohshima, K. Kamiyama, T. Chin, H. Kubota, K. Shinohara, A. Chiba, S. Yamamoto, and H. Watanabe, "Technical Trends of AC Motor Drive Systems in Japan and Foreign Countries," in Proceedings of the 2005 Annual Meeting Record IEE Japan, vol. 4, no. 4-S17-6, pp. S17(24) - S17(29), 2005. (in Japanese)
  7. J. Johnson and M. Shigyo, "Brushless DC Motor Control without Position and Speed Sensors," IEEE Trans. Industrial App., vol. 28, pp. 120-127, Jan./Feb. 1992. https://doi.org/10.1109/28.120220
  8. R. Tomioka, M. Nakano, G. Yang, and T. Chin, "Position and Speed Sensorless Control of Brush-Less DC Motor Based on an Adaptive Observer," Trans. IEE Japan D, vol. 113-D, no. 5, pp. 579-586, May 1993. (in Japanese).
  9. S. Ichikawa, Z. Chen, S. Okuma, M. Tomita, and S. Doki, "Sensorless Controls of Salient-Pole Permanent Magnet Synchronous Motors Using Extended Electromotive Force Models," Trans. IEE Japan D, vol. 122-D, no. 12, pp. 1088- 1096, Feb. 2002. (in Japanese).
  10. R. Masaki, S. Kaneko, Y. Sakurai, and M. Hombu, "Position Sensorless Control System of Brushless DC Motor Based on Voltage Injection Synchronized with PWM Carrier," in Proceedings of the 2001 Japan Industry Applications Society Conference (JIASC2001), vol. 1, no. 242, pp. 1247-1252, 2001. (in Japanese).
  11. T. Fukumoto, Y. Watanebe, H. Hamane, and Y. Hayashi, "A Method for Calculating AC Currents from Sampled DC Current Data in a Three-phase PWM Inverter," Trans. IEE Japan D, vol. 127-D, no. 2, pp. 181-188, Feb. 2007. (in Japanese).
  12. T. Kobayashi and H. Kubota, "Investigation of IPMSM's Position Estimation in Low Speed Region with DC Link Current Detection," in Proceedings of the 22nd Annual IEEE Applied Power Electronics Conference and Exposition (APEC2007), vol. 2, no. D8.4, pp. 1411-1416, 2007.
  13. J. I. Ha, K. Ide, T. Sawa, and S. K. Sul, "Sensorless Rotor Position Estimation of an Interior Permanent-Magnet Motor From Initial States," IEEE Trans. Ind. Appl., vol. 39, no. 3, pp. 761-767, May/Jun. 2003. https://doi.org/10.1109/TIA.2003.811781
  14. M. J. Corley and R. D. Lorenz, "Rotor Position and Velocity Estimation for a Salient-Pole Permanent Magnet Synchronous Machine at Standstill and High Speeds," IEEE Trans. Ind. Appl., vol. 34, no. 4, pp. 784-789, Jul./Aug. 1998. https://doi.org/10.1109/28.703973
  15. F. Briz, M. W. Degner, P. García, and R. D. Lorenz, "Comparison of Saliency-Based Sensorless Control Techniques for AC Machines," IEEE Trans. Ind. Appl., vol. 40, no. 4, pp. 1107-1115, Jul./Aug. 2004. https://doi.org/10.1109/TIA.2004.830768
  16. R. Raute, C. Caruana, J. Cilia, C. S. Staines, M. Sumner, "A Zero Speed Operation Sensorless PMSM Drive Without Additional Test Signal Injection," The European Power Electronics 2007 (EPE 2007), 2007.
  17. Y. Shibano and H. Kubota, "Consideration about Pole Position Estimation Method of IPMSM at Low Speed without High Frequency Components Injection," in Proceedings of the 2008 Annual meeting Record IEE Japan, vol. 4, pp. 152-153, 2008. (in Japanese).
  18. Y. Shibano and H. Kubota, "Pole Position Estimation Method of IPMSM at Low Speed without High Frequency Components Injection," Applied Power Electronics Conference and Exposition, 2009 (APEC 2009).

Cited by

  1. Rotor Position Estimation of PMSM in Low-Speed Region and Standstill Using Zero-Voltage Vector Injection vol.33, pp.9, 2018, https://doi.org/10.1109/TPEL.2017.2767294