한국정밀공학회지 (Journal of the Korean Society for Precision Engineering)

  • 제29권5호
  • /
  • Pages.506-509
  • /
  • 2012
  • /
  • 1225-9071(pISSN)
  • /
  • 2287-8769(eISSN)
한국정밀공학회 (Korean Society for Precision Engineering)
권호 표지
DOI QR코드

DOI QR Code

레이저모듈에서의 1-축 틸팅의 회전각 계산

Angle Calculation Rotation Angle of One-axis Manipulator in Laser Module

  • Jung, Dong-Won (Department of Mechanical Engineering, Jeju Univ.) ;
  • Kim, Dong-Hong (Department of Mechanical Engineering, Jeju Univ.) ;
  • Kim, Bong-Chun (Department of Mechanical Engineering, Jeju Univ.) ;
  • Kim, Dong-Hyeon (Department of Mechanical Design and Manufacturing Engineering, Changwon National Univ.)
  • 투고 : 2012.03.12
  • 심사 : 2012.03.26
  • 발행 : 2012.05.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Laser assisted machining is the processing method that preheating brittle materials by laser heat source and cutting the soften area. This processing applied to various industries because it can be cutting difficult-to-cut materials. However, the laser assisted machining appeared the limitations of processing for equipped with the spindle. So, it assumed separate model that spindle and laser assisted machining. In feed, the calculation of changing the angle of the laser module according to preheat point and the shape of the feed is important and it tried easy calculating changing angle of 1-axis Manipulator in separate model. In 3 types feed shape, angle of 1-axis Manipulator was calculated when fixed and moved in the outside of spindle. In this study, suggest 2 types of methods for laser module when fixed and moved.

키워드

참고문헌

  1. Choi, S. D., Cheong, S. H., Kim, G. M., Yang, S. C. and Kim, J. G., "Characteristics of metal surface heat treatment by diode laser," Journal of Korean Society of Manufacturing Process Engineers, Vol. 6, No. 3, pp. 16-23, 2007.
  2. Lee, J. H., Shin, D. S., Suh, J., Cho, H. Y. and Kim, K. W., "Trends of Laser Integrated Machine," Journal of the Korean Society for Precision Engineering, Vol. 25, No. 9, pp. 20-26, 2008.
  3. Jung, J. W. and Lee, C. M., "A study on the cutting tool and holder deformation prediction undergoing laser-assisted machining with moving heat sources," Journal of Korean Society for Precision Engineering, Vol. 26, No. 9, pp. 127-134, 2009.
  4. Yilbas, B. S., "Laser short-pulse heating: moving heat source and convective boundary considerations," Physica A: Statistical Mechanics and its Applications, Vol. 293, No. 1-2, pp. 157-177, 2011.
  5. Kim, K. S., Kim, J. H., Choi, J. Y. and Lee, C. M., "A review on research and development of laser assisted turning," International Journal of Precision Engineering and Manufacturing, Vol. 12, No. 4, pp. 753-759, 2011. https://doi.org/10.1007/s12541-011-0100-1
  6. Kim, K. S. and Lee, C. M., "Analysis of Moving Heat Soure for Laser Assisted Machining of Plate by Feed Rate Control," Journal of the Korean Society for Precision Engineering, Vol. 28, No. 12, pp. 1341-1346, 2011.

피인용 문헌

  1. Study on Angle Calculation of Two-axis Manipulator for Laser Assisted Machining vol.31, pp.2, 2014, https://doi.org/10.7736/KSPE.2014.31.2.113