DOI QR코드

DOI QR Code

Development of a Solenoid Control Technique for the Suppression of Noise and Vibrations of the Brake System of Elevator Traction Machine

엘리베이터 권상기 브레이크 시스템의 소음 및 진동 감소를 위한 솔레노이드 구동 제어기법 개발

  • 양동호 (동국대학교 기계공학과) ;
  • 김기영 (현대 엘리베이터) ;
  • 허석 (동국대학교 기계공학과) ;
  • 곽문규 (동국대학교 기계로봇에너지공학과) ;
  • 이재하 (동국대학교 기계공학과)
  • Received : 2012.03.14
  • Accepted : 2012.04.24
  • Published : 2012.05.20

Abstract

This paper is concerned with the suppression of noise and vibrations of the brake system of elevator traction machine by means of a solenoid control technique. The solenoid is used to hold the brake shoe, which is then released by turning the solenoid off. Since the brake shoe hits the brake disk, vibrations and noise occur. We developed the solenoid control technique based on the dynamic behavior of the solenoid. The theoretical model for the solenoid is modeled by using linear magnetic principles. The solenoid model was then combined with the vibration model to simulate the vibrations of brake system. The simulation results show that the additional pulse input to the solenoid can decrease the vibrations. The timing of the applied pulse is determined by observing the current. The experimental results show that both the vibrations and noise can be substantially decreased, which validates the approach developed in this paper.

Keywords

References

  1. Watanabe, S., Yumura, T., Kariya, Y. and Hoshino, T., 2003, The Brake Noise Reduction Method for the Elevator Traction Machine, The Transportation and Logistics Conference, JSME, pp. 133-134.
  2. Kim, T. J., Koo, J. H., Jeong, W. B., Kim, Y. H. and Joo, W. H., 2010, Experimental Study for the Reduction of Wet-brake Squeal Noise in a Forklift, Transactions of Korean Society for Noise and Vibration Engineering, Vol. 20, No. 12, pp. 1147-1152. https://doi.org/10.5050/KSNVE.2010.20.12.1147
  3. Suh, J. H., Choi, Y. S., Jeong, J. K., Baek, Y. K. and Yoon, J. H., 2005, Dynamic Analysis of ATM gate Module, Proceeding of the KSNVE Annual Spring Conference, pp. 232-235.
  4. Lee, C. M., Lee, H. J., Bang, K. C., Hwang, G. Y. and Hwang, S. M., 2008, Novel Design of Solenoid Type Actuator Using in Cell-phone, Proceeding of the KSNVE Annual Spring Conference, pp. 230-235.
  5. Cheung, N. C., Lim, K. W. and Rahman, M. F., 1993, Modeling a Linear and Limited Travel Solenoid, Proceedings of the IECON'93, Vol. 3, pp. 1567-1572.
  6. Cheung, N. C., Rahman, M. F. and Lim, K. W., 1993, Simulation and Experimental Studies Towards The Development of A Proportional Solenoid, Proceedings of the AUPEC'93, Vol. 2, pp. 582-587.
  7. Rahman, M. F., Cheung, N. C. and Lim, K. W., 1996, Modeling of A Nonlinear Solenoid Towards the Development of A Proportional Actuator, Proceedings of the 5th International Conference on Modeling and Simulation of Electrical Machines Convertors and Systems., ELECTRIMACS'96, Vol. 1, pp. 121-128.
  8. Rahman, M. F., Cheung, N. C. and Lim, K. W., 1995, Converting a Switching Solenoid to a Propor- tional Actuator, IEEJ Proceedings on International Power Electronics Conference, IPEC'95, pp. 1628-1633.
  9. Chladmy, R. R., Koch, C. R. and Lynch, A. F., 2005, Modeling Automotive Gas-exchange Solenoid Valve Actuators, Transactions of IEEE On Magnetics, Vol. 41, No. 3, pp. 1155-1162. https://doi.org/10.1109/TMAG.2004.841701
  10. Taghizadeh, M., Ghaffari, A. and Najafi, F., 2009, Modeling and Identification of a Solenoid Valve for PWM Control Applications, Transaction of Comptes Rendus Mecanique, Vol. 337, Issue. 3, pp. 131-140. https://doi.org/10.1016/j.crme.2009.03.009
  11. Vaughan, N. D. and Gamble, J. B., 1996, The Modeling and Simulation of a Proportional Solenoid Valve, Journal of Dynamic Systems, Measurement, and Control, Transactions of the American Society of Mechanical Engineering, Vol. 118, pp. 120-125.
  12. Fitzgerald, A. E., Kingsley, Charles, Umans, Stephen D., 2009, Electric Machinery 6/E, McGraw-Hill, Inc.
  13. http://www.dspaceinc.com
  14. http://www.endevco.com/

Cited by

  1. A Study on the Performance Characteristics of an Energy Saving Unit in a Hydraulic Elevator vol.14, pp.6, 2013, https://doi.org/10.5762/KAIS.2013.14.6.2588