Computers and Concrete

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Generalization of shear truss model to the case of SFRC beams with stirrups

  • Received : 2010.09.23
  • Accepted : 2011.05.02
  • Published : 2012.03.25
⟨ Previous Next ⟩

Abstract

A theoretical model for shear strength evaluation of fibrous concrete beams reinforced with stirrups is proposed. The formulation is founded on the theory of plasticity and the stress field concepts, generalizing a known plastic model for calculating the bearing capacity of reinforced concrete beams, to the case of fibrous concrete. The beneficial effect of steel fibres is estimated taking into account the residual tensile strength of fibrous concrete, by modifying an analytical constitutive law which presents a plastic plateau as a post-peak branch. Around fifty results of experimental tests carried out on steel fibrous concrete beams available in the literature were collected, and a comparison of shear strength estimation provided by other semi-empirical models is performed, proving that the numerical values obtained with the proposed model are in very good agreement with the experimental results.

Keywords

References

  1. Adebar, P., Mindess, S., St Pierre, D. and Olund, B. (1997), "Shear test of fiber concrete beams without stirrups", ACI Struct. J., 94(1), 68-76.
  2. American Association of State Highway and Transportation Official (2007), AASHTO LRFD Bridge design specifications, 4th Edition.
  3. Banthia, N. and Trottier, J.F. (1994), "Concrete reinforced with deformed steel fibers, part 1: bond-slip mechanisms", ACI Mater. J., 91(5), 435-446.
  4. Bentz, E.C. (2000), "Sectional analysis of reinforced concrete membrane", Ph. D. Thesis, University of Toronto, Canada.
  5. Campione, G., Cucchiara, C., La Mendola, L. and Papia, M. (2004), "Steel concrete bond in lightweight fiber reinforced concrete under monotonic and cyclic actions", Eng. Struct., 27(6), 881-890.
  6. Campione, G., La Mendola, L. and Papia, M. (2006), "Shear strength of fiber reinforced beams with stirrups", Struct. Eng. Mech., 24(1), 107-136. https://doi.org/10.12989/sem.2006.24.1.107
  7. Campione, G. and Mindess, S. (1999), Fibers as shear reinforcement for high strength reinforced concrete beams containing stirrups, Proc 3th Int. RILEM Work, High performance fiber reinforced cement composites HPFRCC3, Edited by Reihardt H.W. and Naaman A.E., 519-523.
  8. Canadian Standard Association (CSA) Committee A23.3 (2004), Design of concrete structures (CSA A23.3-04). Technical report, Mississauga, Ontario, Canada.
  9. Casanova, P. and Rossi, P. (1997), "Analysis and design of steel fiber reinforced concrete beams", ACI Mater. J., 94(5), 595-602.
  10. Cucchiara, C., La Mendola, L. and Papia, M. (2004), "Effectiveness of stirrups and steel fibres as shear reinforcement", Cement. Concrete Comp., 26(7), 777-786. https://doi.org/10.1016/j.cemconcomp.2003.07.001
  11. Cucchiara, C. and Priolo, S. (2008), "Experimental investigation on high-strength fibre-reinforced concrete beams subjected to bending and shear", Studies and Researches, Graduate School in Concrete Structures - Fratelli Pesenti - Politecnico di Milano, 28, 11-38, Italy.
  12. Dupont, D. and Vandewalle, L. (2003), "Shear capacity of concrete beams containing longitudinal reinforcement and steel fibers", ACI SP-216-Innovations in fiber reinforced concrete for value, Editors N. Banthia, M. Criswell, P. Tatnall and K. Folliard, 216, 79-94.
  13. Eurocode 2 (2004), Design of concrete structures: general rules and rules for buildings, Part 1-1, 222.
  14. Foster, S.J., Voo, Y.L. and Chong, K.T. (2006), "FE analysis of steel fiber reinforced concrete beams failing in shear: variable engagement model", ACI SP, 237, 55-70.
  15. Furlan, S.J. and de Hanai J.B. (1997), "Shear behaviour of fiber reinforced concrete beams", Cement. Concrete Comp., 19(4), 359-366. https://doi.org/10.1016/S0958-9465(97)00031-0
  16. Kearsley, E.P. and Mostert, H.F. (2004), Optimizing mix composition for steel fibre reinforced concrete with ultra high flexural strength, Proceedings of the Sixth International RILEM symposium on Fibre-Reinforced Concretes (FRC)-BEFIB, RILEM.
  17. Kuchma, D., Vegh, P., Simionopoulos, B., Stanik, B. and Collins, M.P. (1997), "The influence of concrete strength distribution of longitudinal reinforcement and member size on the shear strength of reinforced concrete beams", CEB Bulletin $n^{\circ}$ 237, "Concrete Tension and Size Effect", Lausanne, 258.
  18. Lim, T.Y., Paramasivam, P. and Lee, S.L. (1987), "Analytical model for tensile behaviour of steel-fiberconcrete", ACI Mater. J., 84(4), 286-298.
  19. Mancini, G., Recupero, A. and Scilipoti, C.D. (1996), "Shear in RC elements with longitudinal and transversal Web Reinforcements" (Taglio Nel C.A. in Presenza di Armature d'Anima Longitudinali e Trasversali), Studi e Ricerche, Scuola di Specializzazione in Costruzioni in C. A., Fratelli Pesenti, Politecnico di Milano, 17. (in Italian)
  20. Muttoni, A. and Ruiz, M.F. (2008), "Shear strength of memebers without transverse reinforcement as function of critical shear crack width", ACI Struct. J., 105(2), 163-172.
  21. Narayanan, R. and Darwish, I.Y.S. (1987), "Use of steel fibers as shear reinforcement", ACI Struct. J., 84(3), 2066-2079.
  22. Nataraja, M.C., Dhang, N. and Gupta, A.P. (1999), "Stress-strain curve for steel-fiber reinforced concrete under compression", Cement. Concrete Comp., 21(5), 383-390. https://doi.org/10.1016/S0958-9465(99)00021-9
  23. Nielsen, M.P. (1999), Limit analysis and concrete plasticity (2nd Ed.), CRC, Boca Raton, Florida.
  24. Recupero, A., D'Aveni, A. and Ghersi, A. (2003), "N-M-V Interaction domains for box and I-shaped reinforced concrete members", ACI Struct. J., 100(1), 113-119.
  25. Spinella, N., Colajanni, P. and Recupero, A. (2010), "A simple plastic model for shear critical SFRC beams", J. Struct. Eng.-ASCE, 136(4), 390-400. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000127
  26. Swamy, R.N. and Bahia, H.M. (1985), "The effectiveness of steel fibers as shear reinforcement", Concret Int., 7(3), 35-40.
  27. Swiss Society of Engineers and Architects (2003), SIA Code 262 for Concrete Structures, Zurich, Switzerland, 94.
  28. Thomas, J. and Ramaswamy, A. (2006), "Shear strength of prestressed concrete T-beams with steel fiber over partial/full depth", ACI Struct. J., 103(3), 427-435.
  29. Valle, M. and Buyukozturk, O. (1993), "Behavior of fiber reinforced high-strength concrete under direct shear", ACI Mater. J., 90(2), 122-133.
  30. Vandewalle, L. (2002), Test and design methods of steel fibre reinforced concrete - results of the Rilem Committee, Proceedings of the 2nd Leipziger Fachtagung "Innovationen im Bauwesen", Faserbeton, November.
  31. Vecchio, F.J. (2000), "Analysis of shear critical reinforced concrete beams", ACI Struct. J., 97(1), 102-110.
  32. Vecchio, F.J. and Collins, M.P. (1986), "The modified compression field theory for reinforced concrete elements subjected to shear", ACI Struct. J., 83(2), 219-231.
  33. Voo, Y.L. and Foster, S.J. (2003), "Variable engagement model for fibre reinforced concrete in tension", Technical report, School of Civil and Environmental Engineering, The University of New South Wales, Australia.
  34. Voo, Y.L., Foster, S.J. and Gilbert, R.I. (2006), "Shear strength of fiber reinforced reactive powder concrete prestressed girders without stirrups", J. Adv. Concrete Tech., 4(1), 123-132. https://doi.org/10.3151/jact.4.123
  35. Zhang, J.P. (1997), "Diagonal cracking and shear strength of reinforced concrete beams", Mag. Concrete Res., 49(178), 55-65. https://doi.org/10.1680/macr.1997.49.178.55

Cited by

  1. Bending-Shear Interaction Domains for Externally Prestressed Concrete Girders vol.2013, 2013, https://doi.org/10.1155/2013/580646
  2. The compression chord capacity model for the shear design and assessment of reinforced and prestressed concrete beams vol.17, pp.6, 2016, https://doi.org/10.1002/suco.201500214
  3. Shear strength design formula for RC beams with stirrups vol.51, 2013, https://doi.org/10.1016/j.engstruct.2013.01.024
  4. Design procedure for prestressed concrete beams vol.13, pp.2, 2014, https://doi.org/10.12989/cac.2014.13.2.235
  5. Comparison of the mechanical characteristics of engineered and waste steel fiber used as reinforcement for concrete vol.158, 2017, https://doi.org/10.1016/j.jclepro.2017.04.165
  6. Shear strength of full-scale steel fibre-reinforced concrete beams without stirrups vol.11, pp.5, 2013, https://doi.org/10.12989/cac.2013.11.5.365
  7. Shear performance assessment of steel fiber reinforced-prestressed concrete members vol.16, pp.6, 2015, https://doi.org/10.12989/cac.2015.16.6.825
  8. Shear Deformation of Steel Fiber-Reinforced Prestressed Concrete Beams vol.10, pp.S3, 2016, https://doi.org/10.1007/s40069-016-0159-2
  9. Failure by corrosion in PC bridges: a case history of a viaduct in Italy vol.7, pp.2, 2016, https://doi.org/10.1108/IJSI-09-2014-0046
  10. Shear capacity in concrete beams reinforced by stirrups with two different inclinations vol.81, 2014, https://doi.org/10.1016/j.engstruct.2014.10.011
  11. Increasing the Capacity of Existing Bridges by Using Unbonded Prestressing Technology: A Case Study vol.2014, 2014, https://doi.org/10.1155/2014/840902
  12. Shear strength degradation due to flexural ductility demand in circular RC columns vol.13, pp.6, 2015, https://doi.org/10.1007/s10518-014-9691-0
  13. Steel fibre and transverse reinforcement effects on the behaviour of high strength concrete beams vol.42, pp.4, 2012, https://doi.org/10.12989/sem.2012.42.4.551
  14. Fast classification of fibres for concrete based on multivariate statistics vol.20, pp.1, 2012, https://doi.org/10.12989/cac.2017.20.1.023
  15. An investigation into the shear strength of SFRC beams with opening in web using NFEM vol.21, pp.5, 2012, https://doi.org/10.12989/cac.2018.21.5.539
  16. Flexural analysis of steel fibre-reinforced concrete members vol.22, pp.1, 2012, https://doi.org/10.12989/cac.2018.22.1.011
  17. Shear strength of steel-fibre-reinforced concrete beams with web reinforcement vol.172, pp.4, 2012, https://doi.org/10.1680/jstbu.17.00115
  18. Cyclic Response of Steel Fiber Reinforced Concrete Slender Beams: An Experimental Study vol.12, pp.9, 2012, https://doi.org/10.3390/ma12091398
  19. Mechanical model for the shear strength of steel fiber reinforced concrete (SFRC) beams without stirrups vol.53, pp.2, 2012, https://doi.org/10.1617/s11527-020-01461-4
  20. Effect of Steel Fibers on the Hysteretic Performance of Concrete Beams with Steel Reinforcement—Tests and Analysis vol.13, pp.13, 2020, https://doi.org/10.3390/ma13132923
  21. Probabilistic Studies on the Shear Strength of Slender Steel Fiber Reinforced Concrete Structures vol.10, pp.19, 2012, https://doi.org/10.3390/app10196955
  22. Shear capacity prediction of slender reinforced concrete structures with steel fibers using machine learning vol.227, pp.None, 2012, https://doi.org/10.1016/j.engstruct.2020.111470
  23. Seismic Performance of Steel Fiber Reinforced High-Strength Concrete Beam-Column Joints vol.14, pp.12, 2012, https://doi.org/10.3390/ma14123235
  24. Influence of axial force and corrosion on failure of prestressed concrete structures considering M-V interaction vol.242, pp.None, 2012, https://doi.org/10.1016/j.engstruct.2021.112552