DOI QR코드

DOI QR Code

An Analysis on the Protection Mechanism of Some Inert Reactive Cassettes

비활성 요소의 방호 메커니즘 분석

  • Received : 2012.04.24
  • Accepted : 2012.08.24
  • Published : 2012.10.05

Abstract

In this study, a series of ballistic experiments have been performed to investigate the protection mechanism of some inert reactive cassettes against shaped charge jet. Three kinds of material were tested as a core material of the inert cassettes, i.e. one of rubber materials, a high modulus and high strength composite material used for ballistic protection and a mixture of energetic materials. Parameters such as deformation of the cassettes, occurrence time of jet distortion, leading jet length and residual penetration depth were investigated from the experiments and they were compared to each other quantitatively according to the jet incidence angles. The results show that the increment of cassette deformation caused jet distortion to occur early and jet distortion brought decrease of the length of leading jet. Then the decrease of the length of leading jet accompanied the decrease of residual penetration depth.

Keywords

References

  1. Valery Grigoryan, Nikolay Dorokhov, "Evolution of ERA for Light-armoured Fighting Vehicles", http:// www.be-and-co.com/oaf_pdf/oaf01103338.pdf
  2. S. Friling, M. Benyami, D. Yaziv, "The Interaction of Shaped Charge Jets with Combined Reactive - Inert Cassettes", 14th International Symposium on Ballistics, pp. 227-235, 1993.
  3. K. Thoma, D. Vinckier, J. Kiermeir, "Shaped Charge Jet Interaction with Highly Effective Passive Sandwich Systems - Experiments and Analysis", Propellants, Explosives, Pyrotechnics 18, pp. 275-281, 1993. https://doi.org/10.1002/prep.19930180508
  4. Manfred Held, "Disturbance of Shaped Charge Jets by Bulging Armour", Propellants, Explosives, Pyrotechnics 26, pp. 191-195, 2001. https://doi.org/10.1002/1521-4087(200110)26:4<191::AID-PREP191>3.0.CO;2-C
  5. 미국 특허 US20090078346A1(Extremely Insensitive Detonating Substance and Method for its Manufacture).
  6. 주재현, 최준홍, 구만회, 이헌주, 섬광 X선 장비를 이용한 비활성 요소의 작동기구 실험 및 분석(II), 국방과학연구소, ADDR-519-111245, 2011.
  7. A. Holzwarth, K. Weimann, "Combination of Inert and Energetic Materials in Reactive Armor Against Shaped Charge Jets", 19th International Symposium on Ballistics, pp. 1523-1530, 2001.
  8. ZU Xu-dong et al., "Dip Angle Effect on the Impact of Polybutylene Rubber Composite Target Resistance to Jet Penetration", 25th International Symposium on Ballistics, pp. 1239-1246, 2010.
  9. Instruction Manual SCANDIFLASH MODEL 300, Mirror Electronics Co.