Abstract
Due to the increasing demand to utilize water fronts and water resource effectively, a multi-dimensional model that provides detailed hydraulic characteristics is required in order to improve the decision making process. An EFDC model is a kind of multi-dimension model, and it requires detailed 3D (3-dimensional) terrain in order to simulate the hydraulic characteristics of stream flow. In the case of 3D terrain creation, especially river reaches, measurement resolution and spatial interpolation methods affect the detailed 3D topography which uses input data for EFDC simulation. Such results make hydraulic characteristics to be varied. This study aims to examine EFDC simulation results depending on the 3D topographies derived by separate measurement resolution and spatial interpolation methods. The study area is at the confluence of the Nakdong and Kuemho Rivers and the event rain implemented was Typhoon Ewiniar in 2006. As a result, in the case of the area-elevation curve, the difference by means of the interpolation methods was significant when applying the same measurement resolution, except at 160m resolution. Furthermore, when the measurement resolution was 80m or above, the difference in a cross-section was occurred. Meanwhile, the water level changes between interpolation methods were insignificant by the measurement resolution except when the Kriging method was used for the 160m measurement data. Velocity changes emerged according to the interpolation methods when measurement resolution was 80m or above and the Kriging method resulted in a velocity that had a considerable gap in relation to the results from other methods at a measurement resolution of 160m.
수변공간 및 수자원에 대한 효율적 활용 요구가 증대됨에 따라 하천의 수리적인 특성을 보다 정밀하게 모의하고 이를 활용한 의사결정이 필요하다. EFDC 모형은 이러한 의사결정을 지원하기 위한 다차원 수리모형으로 3차원 정밀지형을 활용하여 수체의 수리적인 특성을 분석할 수 있다. 그러나 EFDC 모형의 입력자료로 활용되는 3차원 정밀지형의 경우, 측량간격과 지형보간기법에 의해 많은 영향을 받게 되며 3차원 정밀지형의 변화에 따라 대상 수체의 수리적인 특성이 영향을 받게 된다. 이에 본 연구에서는 다른 측량간격 및 지형보간기법에 따라 도출된 3차원 정밀지형이 EFDC 모형의 모의결과에 미치는 영향을 검토하였다. 연구 대상지역은 낙동강 금호강 유입구간이며, 검토 사상은 2006년 강우사상에 대한 수치모의를 수행하고, 면적-고도 곡선, 수위 및 유속의 모의결과를 비교 분석하였다. 분석결과, 동일한 측량 간격에서는 지형보간기법에 따른 면적고도곡선의 차이는 크지 않았으나, 측량 간격이 160m에서 모든 보간기법에서 차이가 발생하였고 측량간격이 80m 이상이 되면 하상단면의 변화가 발생하였다. 또한, 수위의 경우에 Kriging을 제외한 나머지 기법은 해상도에 따른 차이가 크지 않았고, Kriging은 160m 측량간격에서 다른 기법에 비해 차이가 크게 나타났다. 유속의 경우, 80m 측량간격이상에서 각 보간기법별 차이가 나타나기 시작했으며 160m 측량간격에서 Kriging은 다른 보간기법과 큰 차이를 보이는 것으로 나타났다.