참고문헌
- Lee, D.G., Suh, N.P., Axiomatic design and fabrication of composite structures, Oxford, New York, 2006.
- 이태현, 신성기, "자동차 충돌해석을 위한 구조용 접착제 유한 요소 해석모델 개발," 한국자동차공학회 창립 30주년 기념 학술대회 논문집, 2008, pp. 1141-1146.
- ASTM Designation D950-03, Standard Test Method for Impact Strength of Adhesive bonds.
- 고안전 경량 Front Under Body의 기반기술 및 평가기술 개발, 산업원천기술개발사업 보고서, 지식경제부, 2010.
- Bezemer, A.A., Guyt, C.B., Vlot, A., "New impact specimen for adhesive: optimization of high-speed-loaded adhesive joints," Int. J. Adhesion & Adhesives, Vol. 18, 1998, pp. 255-260. https://doi.org/10.1016/S0143-7496(97)00032-8
- Lee, S.J., Lee, D.G., "Optimal Design of the Adhesively- Bonded Tubular Single Lap Joint," J. Adhesion, Vol. 50, 1995, pp. 165-180. https://doi.org/10.1080/00218469508014364
- Arenas, J.M., Narbon, J.J., Alía, C., "Optimum adhesive thickness in structural adhesives joints using statistical techniques based on Weibull distribution," Int. J. Adhesion and Adhesives, Vol. 30, 2010, pp. 160-165. https://doi.org/10.1016/j.ijadhadh.2009.12.003
- LS-DYNA Version 971 Keyword User's Manual, Livermore Software Technology Corporation, 2009.
- G.R. Cowper, P.S. Symonds, Strain hardening and strain rate effects in the impact loading of cantilever beams, Brown University, Applied Mathematics, Report, 1958.
- M. Huang, Vehicle crash mechanics, CRC Press, Boca Raton, 2002.
- Norman, T.L., Sun, C.T., "Delamination growth in composite laminates with adhesive strips subjected to static and impact loading," Composites Science and Technology, Vol. 46, 1993, pp. 203-211. https://doi.org/10.1016/0266-3538(93)90154-9
- Casas-Rodriguez, J.P., Ashcroft, I.A., Silberschmidt, V.V., "Damage evolution in adhesive joints subjected to impact fatigue," J. Sound and Vibration, Vol. 308, 2007, pp. 467-478. https://doi.org/10.1016/j.jsv.2007.03.088
- Yu, J., Wang, E., Li, J., Zheng, Z., "Static and low-velocity impact behavior of sandwich beams with closed-cell aluminum-foam core in three-point bending," Int. J. Impact Engineering, Vol. 35, 2008, pp. 885-894. https://doi.org/10.1016/j.ijimpeng.2008.01.006
- Kang, W.J., Cho, S.S., Huh, H., D.T. Chung, "Modified Johnson-Cook Model for Vehicle Body Crashworthiness Simulation," Int. J. Vehicle Design, Vol. 21, 1999, pp. 424- 435. https://doi.org/10.1504/IJVD.1999.005594
- Kang, W.J., Huh, H., "Crash Analysis of Auto-Body Structures Considering the Strain-Rate Hardening Effect," Int. J. Automotive Technology, Vol. 1, 2000, pp. 35-41.
- Huh, H., Kang, W.J., Han, S.S., "A Tension Split Hopkinson Bar for Investigating the Dynamic Behavior of Sheet Metals," Experimental Mechanics, Vol. 42, 2002, pp. 8-17. https://doi.org/10.1007/BF02411046
- Yang, L.M., Shim, V.P.W., "An analysis of stress uniformity in split Hopkinson bar test specimens," Int. J. Impact Engineering, Vol. 31, 2005, pp. 129-150. https://doi.org/10.1016/j.ijimpeng.2003.09.002
피인용 문헌
- Design and Performance Evaluation of Carbon Fiber/Epoxy Composite-aluminum Hybrid Wheel for Passenger Cars vol.26, pp.6, 2013, https://doi.org/10.7234/composres.2013.26.6.386