DOI QR코드

DOI QR Code

근골격계의 골조직이 가지는 이방성 및 점탄성 특성

The Anisotropic and Viscoelastic Properties of Bone Tissue

  • 김진성 (한국항공대학교 항공우주 및 기계공학과) ;
  • 권정식 (한국항공대학교 항공우주 및 기계공학과) ;
  • 노진호 (한국항공대학교 항공우주 및 기계공학과) ;
  • 이수용 (한국항공대학교 항공우주 및 기계공학과)
  • 발행 : 2012.02.28

초록

본 연구에서는 외부 충격에 의한 인체의 손상 정도를 수치적으로 예측하기 위한 인체의 근골격계 해석 모델을 제안하기에 앞서 골 조직이 가지는 기본적인 기계적 특성을 실험적으로 살펴보았다. 기계적 물성 시험의 결과, 골 조직의 위치에 따라 기계적 특성이 변화하는 비균질성을 확인하였다. 축 방향이 횡 방향에 비해 강도와 탄성계수가 2배 정도 높게 나타남을 통해 이방성 특성을 확인하였다. 점탄성 특성을 살펴보기 위해 시험 속도를 다르게 하여 시험을 수행한 결과 변형률 속도가 증가 할수록 강도 및 탄성계수가 높게 나타나는 결과를 확인하였다.

In this research, biomechanical characteristics of the bone tissue are experimentally investigated. By using specimens of the bovine bone, the mechanical properties are obtained through tension and shear tests. In experiments, non-homogeneous and anisotropic properties with respect to longitudinal and transversal directions are observed. Moreover, the viscoelastic behavior in which modulus and strength properties are dependent on strain rates is analyzed. It is expected that a numerical damage model of the bone be efficiently established based on the results.

키워드

참고문헌

  1. Turner, C.H., Wang, T., and Burr, D.B., "Shear Strength and Fatigue Properties of Human Cortical Bone Determined from Pure Shear Tests," Calcif Tissue Int, Vol. 69, No. 6, 2001, pp. 373-378. https://doi.org/10.1007/s00223-001-1006-1
  2. Dong, X.N., and Guo, X.E., "The Dependence of Transversely Isotropic Elasticity of Human Femoral Cortical Bone on Porosity," Journal of Biomechanics, Vol. 37, No. 8, 2004, pp. 1281-1287. https://doi.org/10.1016/j.jbiomech.2003.12.011
  3. Shahar, R., Zaslansky, P., Barak, M., Friesem, A.A., Currey, J.D., and Weiner, S., "Anisotropic Poisson's ratio and Compression Modulus of Cortical Bone Determined by Speckle Interferometry," Journal of Biomechanics, Vol. 40, No. 2, 2007, pp. 252-264. https://doi.org/10.1016/j.jbiomech.2006.01.021
  4. Wang, X.J., Chen, X.B., Hodgson, P.D., and Wen, C.E., "Elastic Modulus and Hardness of Cortical and Trabecular Bovine Bone Measured by Nanoindentation," Transactions of Nonferrous Metals Society of China, Vol. 2, No. 2, 2006, pp. 744-748.
  5. Taddei, F., Cristofolini, L., Martelli, S., Gill, H.S., and Viceconti, M., "Subject-Specific Finite Element Models of Long Bones: An in vitro Evalution of the Overall Accuracy," Journal of Biomechanics, Vol. 39, No. 13, 2006, pp. 2457-2467. https://doi.org/10.1016/j.jbiomech.2005.07.018
  6. Ural, A., Zioupos, P., Buchanan, D., and Vashishth, D., "The Effect of Strain Rate on Fracture Toughness of Human Cortical Bone: A Finite Element Study," Journal of the mechanical behavior of biomedical materials, Vol. 4, No. 7, 2011, pp. 1021-1032. https://doi.org/10.1016/j.jmbbm.2011.03.011
  7. Trabelsi, N., Yosibash, Z., Wutte, C., Augat, P., and Eberle, S., "Patient-Specific Finite Element Analysis of the Human Femur-A Double-Blinded Biomechanical Validation," Journal of Biomechanics, Vol. 44, No. 9, 2011, pp. 1666-1672. https://doi.org/10.1016/j.jbiomech.2011.03.024
  8. 김석훈, 장승환, "접촉조건을 고려한 대퇴골 치료용 복합 재료 고정판의 생체 역학적 거동에 관한 유한요소해석," 한국복합재료학회지, 제23권 제1호, 2010, pp. 1-8
  9. 디지털코리안 인체 물성 DB, 한국과학기술정보연구원(KISTI), http://digitalman.kisti.re.kr
  10. An, Y. H., and Draughn, R. A., "Mechanical Testing of Bone and the Bone-Implant Interface," CRC Press, Boca Raton, 2000, pp. 121.
  11. Turner, C.H., and Burr, D.B., "Basic Biomechanical Measurements of Bone : A Tutorial," Bone, Vol. 14, No. 4, 1993, pp. 595-608. https://doi.org/10.1016/8756-3282(93)90081-K
  12. ASTM D5379 M-05, "Standard Test Method for Shear Properties of Composite Materials by the V-Notched Beam Method," Annual Book of ASTM Standard, 2007.
  13. ASTM D3039 M-08, "Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials," Annual Book of ASTM Standard, 2008.
  14. Rho J. Y., "Mechanical Properties of Cortical and Cancellous Bone," Ph.D. dissertation, University of Texas Southwestern Medical Center, Dallas, TX, 1991.
  15. Burstein A.H., Reilly D.T., and Martens, M., "Aging of Bone Tissue : Mechanical Properties," Journal of Bone Joint Surgery, Vol. 58, No. 1. 1976, pp. 82-86. https://doi.org/10.2106/00004623-197658010-00015