DOI QR코드

DOI QR Code

Input Voltage Sharing Control for Input-Series-Output-Parallel DC-DC Converters without Input Voltage Sensors

  • Guo, Zhiqiang (School of Automation, Beijing Institute of Technology) ;
  • Sha, Deshang (School of Automation, Beijing Institute of Technology) ;
  • Liao, Xiaozhong (School of Automation, Beijing Institute of Technology)
  • Received : 2010.06.12
  • Accepted : 2011.10.06
  • Published : 2012.01.20

Abstract

Input-series-output-parallel (ISOP) modular converters consisting of multiple modular DC/DC converters can enable low voltage rating switches for use in high voltage input applications. In this paper, an input voltage sharing control strategy for input-series-output-parallel (ISOP) full-bridge (FB) DC/DC converters is proposed. By sensing the difference in the input current of two modules, the system can achieve input voltage sharing for DC-DC modules. The effectiveness of the proposed control strategy is verified by simulation and experimental results obtained with a 200w-50kHz prototype.

Keywords

References

  1. R. Giri, V. Choudhary, R. Ayyanar, and N. Mohan, "Common duty ratio control of input-series connected modular DC-DC converters with active input voltage and load-current sharing" , IEEE Trans. Ind. Appl., Vol. 42, No. 4, pp. 1101-1111.Jul/Aug. 2006. https://doi.org/10.1109/TIA.2006.876064
  2. V. Choudhary, E. Ledezma, R. Ayyanar, and R. M. Button,"Fault tolerant circuit topology and control method for input-series and output-parallel modular DC-DC converters" , IEEE Trans. Power. Electron., Vol. 23, No. 1, pp. 402-411, Jan. 2008. https://doi.org/10.1109/TPEL.2007.911845
  3. J. W. Kim, J. S. You, and B. H. Cho, " Modeling, control, and design of input-series-output-parallel-connected converter for high-speed-train power system," IEEE Trans. Ind. Electron., Vol. 48, No. 3, pp. 534-544., Jun. 2001.
  4. R. Ayyanar, R. Giri, and N. Mohan ,"Active input-voltage and loadcurrent sharing in input-series and output-parallel connected modular DC-DC converters using dynamic input-voltage reference sheme," IEEE Trans. Power. Electron., Vol. 19, No. 6, pp. 1462-1473, Nov. 2004. https://doi.org/10.1109/TPEL.2004.836671
  5. X. Ruan, W. Chen, L. Cheng, C. K. Tse, H. Yan, and T. Zhang,. "Control strategy for input- series- output-parallel converters," IEEE Trans. Ind. Electron., Vol. 56, No. 4, pp. 1174-1185, Apr. 2009. https://doi.org/10.1109/TIE.2008.2007980
  6. S. P. Natarajan and T. S. Ananadhi, "Control of input series output parallel connected DC-DC converters," Journal of Power Electronics, Vol. 17, No. 3, pp.265-270, Jul. 2007.
  7. P. J. Grbovic, "Master/slave control of input-series-and output-parallelconnected converters: concept for low-cost high-voltage auxiliary power supplies," IEEE Trans. Power Electron., Vol. 24, No. 2, pp. 316-328, Feb. 2009.
  8. K. Siri, M. Willhoff, and K. Conner, "Uniform voltage distribution control for series connected DC-DC converters," IEEE Trans. Power Electron., Vol. 22, No. 4, pp. 1269-1279, Jul. 2007. https://doi.org/10.1109/TPEL.2007.900555
  9. D. Sha, Z. Guo, and X. Liao, "Digital control strategy for input-seriesoutput- parallel modular dc/dc converters," Journal of Power Electronics, Vol. 10, No. 3, pp. 245-250, May 2010. https://doi.org/10.6113/JPE.2010.10.3.245
  10. J. W. Kimball, J. T. Mossoba, and P. T. Krein, "A stabilizing, high performance controller for input-series-output parallel converters," IEEE Trans. Power Electron., Vol. 23, No. 3, pp. 1416-1427, May 2008. https://doi.org/10.1109/TPEL.2008.921151
  11. D. Sha, Z. Guo, and X. Liao, "Cross-feedback output -current -sharing control for input- series- output- parallel modular DC-DC converters," IEEE Trans. Power Electron ., Vol. 25, No. 11, pp. 2762-2771, Nov. 2010. https://doi.org/10.1109/TPEL.2010.2049504

Cited by

  1. Output Current-Differential Control Scheme for Input-Series–Output-Parallel-Connected Modular DC–DC Converters vol.32, pp.7, 2017, https://doi.org/10.1109/TPEL.2016.2607459