Journal of Welding and Joining

The Korean Welding and Joining Society (대한용접접합학회)
권호 표지
DOI QR코드

DOI QR Code

Brazing Filler Metal and Process for Stainless Steel

스테인리스강용 브레이징 합금과 브레이징 공정

  • 홍성철 (서울시립대학교 신소재공학과) ;
  • 박상윤 (서울시립대학교 신소재공학과) ;
  • 정도현 (서울시립대학교 신소재공학과) ;
  • 오주희 (한국켐테크 주식회사) ;
  • 이재훈 (한국생산기술연구원 주조기술센터) ;
  • 김원중 (서울시립대학교 신소재공학과) ;
  • 정재필 (서울시립대학교 신소재공학과)
  • Published : 2012.12.31
Download PDF
⟨ Previous Next ⟩

Abstract

Brazing technology has been widely used among bonding technologies because it enables to bond various metals, even ceramics, dissimilar metals, and give higher bonding strength, cost down, automation, etc. However, there are many parameters to achieve optimal brazing joint such as brazing alloys, brazing atmospheres, designs and brazing methods, etc. The brazing parameters affect seriously on the characteristic of final brazing products. Stainless steel is broadly used in high temperature applications, chemical industry, heat exchangers, muffler of vehicles, and so on. Accordingly, in this article, brazing alloys, forms of brazing alloys, brazing methods and atmospheres for stainless steel were described.

Keywords

References

  1. Y. W. Lee, J. H. Kim : Influence of Brazing Temperature on Strength and Structure of SUS304 Stainless Steel Brazed System with BNi-2 Filler Metal : Fundamental Study on Brazeability with Ni Based Filler Metal(II), Korean Journal of Materials Research 17-3 (2007), 179-183 https://doi.org/10.3740/MRSK.2007.17.3.179
  2. 강정윤, 김무열 : Brazing 기술의 기초와 실제 IV; Brazing의 방법 및 장치, 대한용접접합학회지, 11-4, 10-23 (1993) (in Korean)
  3. 실무위주의 브레이징 접합기술 10, 기계정보 기계기술, 32(10) (2005), 122-137 (in Korean)
  4. C. D. Lee, S. J. Na : A Study on the Vacuum Brazing of Carbon Steels to a Stainless Steel, The Korean Society of Mechanical Engineers A 56 (1988), 1083-1091 (in Korean)
  5. K. H. Kim, K. H. Kim, M. G. Lee, H. H. Kim, S. W. Kim, S. H. Kim : Preliminary Investigation on Joining Performance of Intermediate Heat Exchanger Candidate Materials of Very High Temperature Reactor(VHTR) by Vacuum Brazing, KWS 2005-Autumn, 45 (2005), 195-197 (in Korean)
  6. 문병기 : 고온 브레이징 기술의 현황, 한국기계연구소 소보, 97-112 (1998) (in Korean)
  7. 강정윤, 김무열 : Brazing 기술의 기초와 실제 (III), 대한용접접합학회지, 11-1 (1993), 9-20 (in Korean)
  8. J. P. Jung, B. Y. Lee, W. C. Lee, C. S. Kang : Effect of Sn and P on the shear strength of copper to stainless steel brazed joint, Journal of KWS, 7-3 (1989), 36-43 (in Korean)
  9. W. C. Lee, C. S. Kang, J. P. Jung, B. Y. Lee : A Study on Bonding Strength and Interfacial Structure of Copper-Stainless Steel Brazed Joint(II), Materials Research Society of Korea, 3-6 (1993), 668-677 (in Korean)
  10. W. C. Lee, C. S. Kang, J. P. Jung, B. Y. Lee : Brazability between Cemented Titanium Carbide and 304 Stainless Steel, J. of the Korean Inst. of Met. Mater., 30-9 (1992), 1136-1143 (in Korean)