References
- Han, M., Lee, W., Lee, S. K., and Lee, S. S., "3D microfabrication with inclined/rotated UV lithography," Sensors and Actuator A: Physical, Vol. 111, No. 1, pp. 14-20, 2004. https://doi.org/10.1016/j.sna.2003.10.006
- Hartl, I., Li, X. D., Chudoba, C., Ghanta, R. K., Ko, T. H., Fujimoto, J. G., Ranka, J. K., and Windeler, R. S., "Ultrahigh-resolution optical coherence tomography using continuum generation in an air-silica microstructure optical fiber," Optics Letters, Vol. 26, No. 9, pp. 608-610, 2001. https://doi.org/10.1364/OL.26.000608
- Loh, B. K., Kim, W., and Shim, K. B., "Fabrication of Micro-channels for Wave-Micropump Using Stereolithography and UV Photolithography," J. of the KSPE, Vol. 24, No. 12, pp. 128-135, 2007.
- Noh, Y. J., Arai, Y., Tano, M., and Gao, W., "Fabrication of large-area micro-lens arrays with fast tool control," Int. J. Precis. Eng. Manuf., Vol. 9, No. 4, pp. 32-38, 2008.
- Kang, I. S., Jeong, Y. S., Kwon, D. H., Kim, J. H., Kim, J. S., and Ahn, J. H., "Tool Condition Monitoring using AE Signal in Micro Endmilling," J. of the KSPE, Vol. 23, No. 1, pp. 64-71, 2006.
- Kim, S. J., Kim, K. S., Cho, B. M., Kim, H. C., and Lee, D. J., "Characteristics of slot machining by using micro endmill," Proc. of KSPE Spring Conference, pp. 245-246, 2007.
- Je, T. J., Choi, D. S., Lee, E. S., Hong, S. M., Lee, J. C., and Choi, H., "Micro end-milling technology for micro pole structures," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 4, No. 4, pp. 7-13, 2005.
- Jeon, D. S., Seo, T. I., and Yoon, G. S., "A study of machining error compensation for tool deflection in side-cutting processes using micro end-mill," Transaction of the Korean Society of Machine Tool Engineers, Vol. 17, No. 2, pp. 128-134, 2008.
- Hsieh, H. and Chu, C., "Optimization of tool path planning in 5-axis flank milling of ruled surfaces with improved PSO," Int. J. Precis. Eng. Manuf., Vol. 13, No. 1, pp. 77-84, 2012. https://doi.org/10.1007/s12541-012-0011-9
- Kim, G. H., Yoon, G. S., Son, J. I., and Cho, M. W., "Investigation on the effect of low temperature micro cutting process for mold core material," Int. J. Precis. Eng. Manuf., Vol. 13, No. 5, pp. 783-788, 2012. https://doi.org/10.1007/s12541-012-0103-6
- Je, T. J., Jeon, E. C., Jang, S. H., Choi, D. S., Choi, H. J., and Park, E. S., "Machining technology of micro shape parts using micro end-mill," Proc. of KSPE Spring Conference, pp. 203-204, 2012.
- Lee, K. Y., Lee, D. K., Lee, K. W., Park, J. H., and Kim, J. S., "Runout modeling and measurement method in 4-flutes end milling," J. of the KSPE, Vol. 21, No. 3, pp. 22-29, 2004.
- Hong, Y. C., Ha, S. J., and Cho, M. W., "Predicting of cutting forces in a micromilling process based on frequency analysis of sensor signals and modified polynomial neural network algorithm," Int. J. Precis. Eng. Manuf., Vol. 13, No. 1, pp. 17-23, 2012. https://doi.org/10.1007/s12541-012-0003-9